Mohammad Alam
AeroLeads people directory · profile

Mohammad Alam Email & Phone Number

Senior Specialist Process Engineering, Lead Process Engineer at Worley
Location: Pearland, Texas, United States 8 work roles 2 schools
LinkedIn matched
✓ Verified August 2026 3 data sources Profile completeness 86%

Contact Signals

LinkedIn Profile matched
3 free lookups remaining · No credit card
Current company
Worley
Role
Senior Specialist Process Engineering, Lead Process Engineer
Location
Pearland, Texas, United States
Company size
51 employees

Who is Mohammad Alam? Overview

A concise factual answer block for searchers comparing this professional profile.

Quick answer

Mohammad Alam is listed as Senior Specialist Process Engineering, Lead Process Engineer at Worley, a with 51 employees, based in Pearland, Texas, United States. AeroLeads shows a matched LinkedIn profile for Mohammad Alam.

Mohammad Alam previously worked as Senior Specialist Process Engineering at Worley and Senior Specialist Process Engineering at Worley. Mohammad Alam holds Masters, Chemical Engineering from New Jersey Institute Of Technology.

Company email context

Email format at Worley

This section adds company-level context without repeating Mohammad Alam's masked contact details.

Worley

Review company-level records connected to Mohammad Alam before choosing the right outreach path.

View email format View company profile Management contacts
Profile bio

About Mohammad Alam

Areas of expertise include process engineering, energy and yield/cut point improvement ideas and optimization, operation/troubleshooting, Fluid Catalytic Cracking (FCC)/Hydrotreaters catalyst formulations for yield optimization and unit performances, crude unit heat optimization, desalter performances, new crude evaluations. Implement key process/chemical indicators and material operating envelopes to improve reliability of refinery process units. Develop and mentor process engineers and interns. Manage reliability refinery professionals and all process units and achieve best reliability programs in Entire Corporation and save millions of dollars by proactively identifying pipe/equipment issues before failure. Process Design expertise includes initial conceptual design, through detail engineering/construction and start-up for the Crude, Vacuum, Gas Recovery, Coker, Hydrotreaters, Gas oil/Resid Hydrocrakers, Fluid Catalytic Cracking, Sour Water, Amine and Sulfur Recovery Units. Process Design Engineering responsibilities include, technology evaluations, design basis, PFD’s, heat & material balances, simulation modeling (HYSYS, PROII, ASPEN), heat exchanger ratings, tower internals, hydraulics, relief valve load/sizing studies, P& ID’s, HAZOP, value engineering, vacuum transfer line, procurement, cost estimate and schedule. Also, Process Design expertise includes to produce Syngas to reduce CO2 emission. Refinery projects scope ranged from small studies to grassroot complexes valued in $1 Billion.

Current workplace

Mohammad Alam's current company

Company context helps verify the profile and gives searchers a useful next step.

Worley
Worley
Senior Specialist Process Engineering, Lead Process Engineer
Pearland, TX, US
Website
narva.com.au
Employees
51
AeroLeads page
Company profile
View company profile Email format
8 roles · 26 years

Mohammad Alam work experience

A career timeline built from the work history available for this profile.

Senior Specialist Process Engineering, Lead Process Engineer

Worley

Pearland, Tx, Us

Senior Specialist Process Engineering

Worley

Pearland, Tx, Us

Senior Specialist Process Engineering

Worley

North Sydney, Nsw, Au

- Saudi Aramco Residue Upgrade (UOP Hydrocracker Unit) Ras Tanura Refinery – DBSP FEL II / PP FEL III Design, Upgrade Fuel Oil into more premium products, cost ~$4.5 billion. Issued process design packages.- Saudi Aramco Liquid to Chemical SASRAF Project, cost ~$35 Billion, led workshops to complete licensor selection process on Diesel/Naphtha Hydrotreater, Heavy/Resid Hydrocracker. Issued technology selection reports to client.

Engineering Manager

Hargrove Engineers & Constructors

Mobile, Al, Us

Arbor Gas Project - Front-End Loading (FEL), produce gasoline from woodchip's, ~$800 MM. Designed Syngas Cleaning unit, deliverables included, PFDs, HMB, PIDs, equipment design (towers, reactors, drums, pump hydraulics, etc.) and HAZOP.• CHS McPherson Refinery, (FEL) to Detail Engineering to increase Diesel Hydrotreater unit capacity. Rated major equipment capability using HYSYS, ~$16 MM.• Nutrien, Borger demineralized water system upgrade with improve technology, cost $5 MM.

2019 - 2023 ~4 yrs

Reliability Manager - Process Units/Tank Farm

Valero Refining

Maintained department below budget for 7 years and saved ~10 % cost every year, reduced un-planned process units shutdown, performed rigorous root cause analysis of failures and made improvements. Implemented 1st in the entire Corporation Material Operating Envelope indicators for entire refinery process units that allowed reducing equipment/piping failures. Made process, chemical and metallurgical improvements in refinery to improve run length.

2011 - 2019 ~8 yrs

Process Engineering Supervisor / Senior Staff

Valero Refining

Process engineering support using PROSIM model to monitor catalyst and units performances, monthly heat and material balances reports, energy and yield optimization reports, identified projects, exchanger performance using HYSYS modeling, amine usage optimization, key process/chemical operating limits for refinery units of Crude/Vacuum, Hydrotreaters, Rose, FCC, Coker, HF Alkylation Sulfur Recovery Unit, Amine and Sour Water.

2004 - 2011 ~7 yrs

Lead/Senior Process Design Engineering

Exxonmobil, Beaumont Refinery

Us

Implemented several ideas from Hydro-cracker brainstorming turn-around sessions and saved $1.0 million. Reduced energy consumption of Diesel Hydrotreater unit and saved $1.0 million / year. Developed crude unit HYSYS simulation to improve energy consumption in crude unit exchangers trains and saved heaters fuel gas saving of $2.8 million annually.

2001 - 2004 ~3 yrs

Lead/Senior Process Design Engineering

Kellogg Brown & Root, Inc. / Tetra Engineering/Foster Wheeler

Petro-Canada Project to process heavy bitumen crude, designed Gasoil/Distillate Hydrotreater, Amine and Sour Water Units. Designed Amine/Sour Water Units for the Cerro Negro Project. Process deliverables included; simulations, PFD's, P&ID's, hydraulics, heat exchanger ratings, tower internals, and pressure relieve valve.Yukong Refinery, designed fractionation, de-ethanizer & debutanizer columns using PRO/II simulation, rigorous reactor recycle loop hydraulics. Developed P&IDs / equipment sizing for Diesel/Kerosene Hydrotreater, Thailand Project.

Dec 1992 - Jan 2001
Team & coworkers

Colleagues at Worley

Other employees you can reach at narva.com.au. View company contacts for 51 employees →

SK Suresh Kurapati Suresh Kurapati Colleague at WorleyHenderson, Nevada, United States View → RS Renee Schot Renee Schot Colleague at WorleyHouston, Texas, United States View → CC Carmen Camaran Carmen Camaran Colleague at WorleyHouston, Texas, United States View → GN Gustavo Naegele Gustavo Naegele Colleague at WorleyBogota, D.C., Capital District, Colombia View → MM Mario Moran Pmp, Dasm, Asq Cmq/Oe, Cqe, Cqa, Qmsla Mario Moran Pmp, Dasm, Asq Cmq/Oe, Cqe, Cqa, Qmsla Colleague at WorleyGreater Houston, United States View → MF Michael Freeman Michael Freeman Colleague at WorleyGreater Houston, United States View → JG Jamie Garden Jamie Garden Colleague at WorleyGreater Houston, United States View → CS Craig Sundet Craig Sundet Colleague at WorleyAnchorage, Alaska, United States View → MF Mohsen Farahani, P.E. Mohsen Farahani, P.E. Colleague at WorleyUnited States View → AP Anh Pham Anh Pham Colleague at WorleyHouston, Texas, United States View →
2 education records

Mohammad Alam education

Masters, Chemical Engineering

New Jersey Institute Of Technology

Bachelor In Science In Chemical Engineering

N.E.D. Engineering
FAQ

Frequently asked questions about Mohammad Alam

Quick answers generated from the profile data available on this page.

What company does Mohammad Alam work for?

Mohammad Alam works for Worley.

What is Mohammad Alam's role at Worley?

Mohammad Alam is listed as Senior Specialist Process Engineering, Lead Process Engineer at Worley.

Where is Mohammad Alam based?

Mohammad Alam is based in Pearland, Texas, United States while working with Worley.

What companies has Mohammad Alam worked for?

Mohammad Alam has worked for Worley, Hargrove Engineers & Constructors, Valero Refining, Exxonmobil, Beaumont Refinery, and Kellogg Brown & Root, Inc. / Tetra Engineering/Foster Wheeler.

Who are Mohammad Alam's colleagues at Worley?

Mohammad Alam's colleagues at Worley include Suresh Kurapati, Renee Schot, Carmen Camaran, Gustavo Naegele, and Mario Moran Pmp, Dasm, Asq Cmq/Oe, Cqe, Cqa, Qmsla.

How can I contact Mohammad Alam?

You can use AeroLeads to view verified contact signals for Mohammad Alam at Worley, including work email, phone, and LinkedIn data when available.

What schools did Mohammad Alam attend?

Mohammad Alam holds Masters, Chemical Engineering from New Jersey Institute Of Technology.

Find 750M verified contacts

Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.