Mohammad Jamil
AeroLeads people directory · profile

Mohammad Jamil Email & Phone Number

Site Civil Engineer at Dorsch International Consultants GmbH. From May 2012 to September 2018
Location: Pakistan 8 work roles 1 school
LinkedIn matched
✓ Verified July 2026 3 data sources Profile completeness 86%

Contact Signals

LinkedIn Profile matched
3 free lookups remaining · No credit card
Role
Site Civil Engineer at Dorsch International Consultants GmbH. From May 2012 to September 2018
Location
Pakistan

Who is Mohammad Jamil? Overview

A concise factual answer block for searchers comparing this professional profile.

Quick answer

Mohammad Jamil is listed as Site Civil Engineer at Dorsch International Consultants GmbH. From May 2012 to September 2018 based in Pakistan. AeroLeads shows a matched LinkedIn profile for Mohammad Jamil.

Mohammad Jamil previously worked as Site Civil Engineer at Dorsch International Consultants Gmbh and Site Civil Engineer at Dorsch International Consultants Gmbh. Mohammad Jamil holds Dae Civil, Civil Engineering from Gpi Haripur Hazara Pakistan.

Profile bio

About Mohammad Jamil

Having over 30 years { 20 years in UAE & Qatar } working experience in construction of Civil works of Road highway and Bridge works,Earth work,Aggregate base course and Asphalt work including all ancillary works,Concrete,work,Surface water drainage,,Site development works,Water line,Sewerage line,Landscaping and Bridge work.

Listed skills include Civil Engineering, Road, Concrete, Bridge, and 17 others.

8 roles · 29 years

Mohammad Jamil work experience

A career timeline built from the work history available for this profile.

Site Bridge Engineer

Lusail Development Primary Infrastructure Package Cp5B

ROAD TOTAL= 11.5 KMA1 & A2 4 LANE EACH WAYD2 & D3 2 LANE EACH WAYINTER SECTION 14 NOSUNDERPASS WAY 1018 M & 440 MUTILITY TUNNEL (1 CELL) 1800 M & (2 CELL) 1400 MUTILITY PIPE (POTABLE) 16583 MFOUL SEWER (5,010 MSTORM WATER 34,761 MIRRIGATION 17,085 MCABLE AND DUCT CABLE,ROAD LIGHTING,TRAFFIC SIGNAL,ELV & Q-TEL

Sep 2012 - Mar 2015

Site Bridge Engineer

Lusail Development Primary Infrastructure Package 3A Phase 2

6 BRIDGES : TOTAL LENGTH 951.5MCONCRETE BRIDGE: 4 NOS (561.5M)SUSPENSION BRIDGE : 2 NOS. (390M)BORED PIPE :384 EA (800MM DIA > 1,000MMREBAR : 7,300 TONS, STEEL :5,879 TONS( CONCRETE BRIDGES)1)BR#3: 3 SPANS (33.75M + 45M + 33.75M = 112.5M)2)BR#4 : 3 SPANS(33.75M + 45 M + 33.75M = 112.5M)3)BR#5 : 3 SPANS(37M + 45M + 37M = 119M)4)BR#7 : 5 SPANS(41.25M + 45M + 45M + 45M + 41.25M = 217.5M)(SUSPENSION BRIDGES)1)BR#8 : 3 SPANS(60M + 30M + 114M = 204M)2BR#9 : 3 SPANS(54M + 30M + 102M = 186M)

May 2012 - Sep 2012

Site Inspector

Abu Dhabi

Client : Department of Transport (DOT) Abu Dhabi, UAE. Duration : From 18 OCT 2011 to 17 may 2012Designation : Site Inspector.Project : Sheik Khalifa Interchange- (KPIZ)Cost : 600 million AED The work consists of Construction of 4nosBridges (post Tension Box Girder); 1. BridgeD0.1: Total Length-98m (2 span- Dual way ) (4 cell Box Girder) Max.span -49m Width -18.60m 2. BridgeD1.2: Total Length-139.6m (4 span-Dual way ) (8 cell Box Girder) Max.span -39.8m Width -33.25m 3. BridgeD1.3: Total Length-139.6m (4 span-single) (4 cell Box Girder) Max.span -39.8m Width -18.30m 4.BridgeD.1.4: Total Length-76.80m (2 span- Dual way ) (3 cell Box Girder) Max.span -39.70m Width -11.60m Underpass-D1.1: (single cell Box Type Voided slab) Total Length-62.40m Width -19.70m Construction of new 4 lane dual carriage way -4.5Km Widening of Existing 4 lane carriage way -7.8Km Alignments of Collector Distributor Roads (Service Road) Utility works like Electrical, surface drainage,Box culvert, Provisional works like land scaping, water, irrigation works Precast and Erection for MSE walls, concrete Crass barrier

Oct 2011 - May 2012

Site Inspector

Fujairah

Client : Ministry of Public Works (Dubai)Duration : From 15 July 2006 – 30 sep.2011Designation : Site Inspector.Project : Dubai – Fujairah Freeway, Contract No. 2Cost : 1,000,000,000.00 DhsThe project consists of the construction of a new east/west 3 lane per direction freeway linking Fujairah with the Northern Emirates and Abu Dhabi. The total length of Dubai – Fujairah Free way is approximately 45.40 Km.The work consists of Construction of new pipe and 4x4 box culverts (90,000cu.m concrete and 10,000 tons steel rebars), Camel underpasses channels, 3 nos Bridges (1 no 2-span 90m total length,1 no. single span 36m length and 1 no. 4 span 180m total length), Reinforced earth retaining walls, 13,000,000 cu.m of cutting (75% blasting gabro rock), 11,500,000 cu.m filling works, extensive drainage network of ditches and chutes, stone pitching works for side ditches and slope protection , gabion retaining walls, roadway lighting network, 20 km concrete barriers and guardrails, 130,000 cu.m of sub-base, 90,000 cu.m of wet mix macadam road base and 200,000 tons of bituminous macadam asphalt courses etc.

Jul 2006 - Sep 2011

Qa / Qc Engineer

High-Point Rendel Limited

Qatar

Client : Ministry Of Municipal Affairs & Agriculture, State of QatarDuration : From 15th Feb.2003 to 31 July 2004Designation : QA / QC Engineer.Project : SALWA INTERCHANGEThis prestigious project worth of 164 million QR. Comprised a length of 1.4 km Interchange and Underpass along with a Round About at ground level.I was responsible for all civil works including earth works, pavements, utilities, waterlines 150 to 1200 mm dia. DI pipes, TSE irrigation line, HDPE pipes 150 to 560 mm dia, Surface water drainage 150 to 1000 mm dia. Clay pipes, Sewerage line 200 to 600 mm dia., Pressure testing & Backfilling manhole construction etc.

Feb 2003 - Jul 2004

Site Inspector

High-Point Rendel Limited

Al Ain Uae

1998 - 2000 ~2 yrs
1 education record

Mohammad Jamil education

  • Gpi Haripur Hazara Pakistan
    Gpi Haripur Hazara Pakistan
    Civil Engineering
FAQ

Frequently asked questions about Mohammad Jamil

Quick answers generated from the profile data available on this page.

What is Mohammad Jamil's role at their current company?

Mohammad Jamil is listed as Site Civil Engineer at Dorsch International Consultants GmbH. From May 2012 to September 2018.

Where is Mohammad Jamil based?

Mohammad Jamil is based in Pakistan.

What companies has Mohammad Jamil worked for?

Mohammad Jamil has worked for Dorsch International Consultants Gmbh, Dorsch Qatar, Mouchel, Dorsch Holding Gmbh - Abu Dhabi, and High-Point Rendel Limited.

How can I contact Mohammad Jamil?

You can use AeroLeads to view verified contact signals for Mohammad Jamil, including work email, phone, and LinkedIn data when available.

What schools did Mohammad Jamil attend?

Mohammad Jamil holds Dae Civil, Civil Engineering from Gpi Haripur Hazara Pakistan.

What skills is Mohammad Jamil known for?

Mohammad Jamil is listed with skills including Civil Engineering, Road, Concrete, Bridge, Drainage, Highways, Earthworks, and Construction.

Find 750M verified contacts

Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.

People with similar names

Check these profiles if this is not the Mohammad Jamil you were looking for.

View similar profiles