Mohammad Mokhtar Email & Phone Number

Uae

Pre- commissioning & Commissioning  Commissioning & pre- commissioning Operations with a leading organization of repute Troubleshooting of yokogawa DCS (CENTIUM CS 3000) Installation and Commissioning. Configuration of ICS,FCS and EWS(Information & command Station, Field Work Control station and Engineering work Station) Programming, Configuration and Modification in Yokagawa DCS and in Triconix plcs. Working in TRICONIX 1131 developer. Preparation of Technical… Show more Pre- commissioning & Commissioning  Commissioning & pre- commissioning Operations with a leading organization of repute Troubleshooting of yokogawa DCS (CENTIUM CS 3000) Installation and Commissioning. Configuration of ICS,FCS and EWS(Information & command Station, Field Work Control station and Engineering work Station) Programming, Configuration and Modification in Yokagawa DCS and in Triconix plcs. Working in TRICONIX 1131 developer. Preparation of Technical Documentation. Checking Calibration of instrument through DCS in Field bus (Field Foundation Bus) Downloading Field Foundation Segment in DCS Controlling Plant through DCS. Configuration Alarm and checking Alarm Creating Graphic on SCADA Developing scripts in SCADA Having a good experience in Foundation Field bus & Hart Protocol. Show less

Angola

• Installation of the In-Line on-line instrument like pressure, Level, Temperature and flow instrument etc. Using the instrument index and checking with P&ID• Using hook-up drawings taking the scope of material for material requisitions for tubing and piping and its accessories.• Installation of instrument using instrument layouts and location plant with respect to Hazardous area classification drawing.• Lying of IS/Non IS cable as per the cable schedule.• Termination of cable… Show more • Installation of the In-Line on-line instrument like pressure, Level, Temperature and flow instrument etc. Using the instrument index and checking with P&ID• Using hook-up drawings taking the scope of material for material requisitions for tubing and piping and its accessories.• Installation of instrument using instrument layouts and location plant with respect to Hazardous area classification drawing.• Lying of IS/Non IS cable as per the cable schedule.• Termination of cable as per interconnection drawing.• Installation of cable tray as per specification and as per site condition from instrument to Junction box Show less

Angola

Having wide knowledge and on hands practical experience of Calibration like FT,PT,LT,TT,DPT, PDT,TC,RTD,Control valve, I/P Converter all types of instruments Electronic& Pneumatic, Switches, Installation &Troubleshooting

Zadco Uz750 Offshore Project At Abu Dhabi, United Arab Emirates

 Programming of PLC, Configure/Interfacing of DCS, SCADA, PAC, HMI and VFD, Excellent Knowledge of PLC,DCS Base Automation, EMCP II+,TTD, TTDJ, Centurion configurable controller(C3 Series Model),In-line sampling systems, Process Automation and troubleshooting of electronics and pneumatic logical circuit, Good understanding of engineering drawing and its interpretations

Zadco Offshore At Abu Dhabi, United Arab Emirates

• I was representative by ExxonMobil• Reviewing of System Dossier and Plant System Component List Database.• Assist Commissioning Manager in ensuring the commissioning work meets the Project objectives by conducting all necessary supervision of commissioning development preparation and execution work• Setup, populate and maintain the databases to follow‐up and track the commissioning work progress• Endorse discipline specific formal handover documents from project at… Show more • I was representative by ExxonMobil• Reviewing of System Dossier and Plant System Component List Database.• Assist Commissioning Manager in ensuring the commissioning work meets the Project objectives by conducting all necessary supervision of commissioning development preparation and execution work• Setup, populate and maintain the databases to follow‐up and track the commissioning work progress• Endorse discipline specific formal handover documents from project at Pre‐commissioning & commissioning completion stage, confirming their acceptability including Site Acceptance Testing, Operational Readiness Testing and Operational Acceptance Show less

Refining And Petrochemical Company (Satorp)- Aramco Project Saudi Arabia

• Assistance / coordination in reviewing of the contractor’s job procedures and other documents e.g. Quality Plans and ITP’ etc. and recommend modification wherever necessary.• Monitor that approved procedures, proper methods, technology and proper techniques are used and proper tools/tackles/machines are deployed.• Monitoring deployment of adequate resources (e.g. Man power and machines) and necessary follow-up.• Assist field planning group to develop micro planning of jobs and… Show more • Assistance / coordination in reviewing of the contractor’s job procedures and other documents e.g. Quality Plans and ITP’ etc. and recommend modification wherever necessary.• Monitor that approved procedures, proper methods, technology and proper techniques are used and proper tools/tackles/machines are deployed.• Monitoring deployment of adequate resources (e.g. Man power and machines) and necessary follow-up.• Assist field planning group to develop micro planning of jobs and sequence of activities as per availability of front. Show less

Pearl Gas-To Liquids (Gtl) Gas Plant Raslaffan Qatar

• Prepared pre commissioning activity such as : instrument calibration test, megger test, continuity test, leak test of tubing, impedance test, mark up drawing, test package etc• Responsible for Testing, Cold - Hot Loop Checking, Functional Test, C&E, Pre-Commissioning, commissioning and start - up activities related to the project expansion & Existing Plant.• DCS – PLC Plant Configuration programmer.• Reporting daily progress to Commissioning Manager

East Area Ngl Ii Project Offshore Bonny River Terminal At Nigeria

• I was employee to ExxonMobil, worked as an Instrumentation supervisor, Daily • responsible for the Factory Acceptance Tests (FATs), installation and commissioning of the Yokogawa PAS, SIS and FGS systems for the Bonny Terminal Integrated Project in Nigeria on behalf of Shell Nigeria. On site commissioning of all systems within the project scope.• Systems included: Foundation Fieldbus, Hart, OPC, Prosafe and Profibus DP-V1.• Carried out FATs (in S. Korea, Holland, Singapore and… Show more • I was employee to ExxonMobil, worked as an Instrumentation supervisor, Daily • responsible for the Factory Acceptance Tests (FATs), installation and commissioning of the Yokogawa PAS, SIS and FGS systems for the Bonny Terminal Integrated Project in Nigeria on behalf of Shell Nigeria. On site commissioning of all systems within the project scope.• Systems included: Foundation Fieldbus, Hart, OPC, Prosafe and Profibus DP-V1.• Carried out FATs (in S. Korea, Holland, Singapore and Germany) on Khrone UFM meters, Hobre Analyzers, Show less

Offshore Project Dukhan Doha Qatar

• Reporting daily progress to Commissioning Manager• Coordination and supervision of Commissioning, Start-Up activities in the field.• Pre-Commissioning, Commissioning and calibration of transmitters FT,PT,LT,TT,DPT• Experience in, PLC & DCS Pre-commissioning , Commissioning & Turnover• Involved in Cause & Effect Testing, Function Test and configuring of PLC, SCADA, DCS/ESD/F&G systems and Loop Check Activities.

Catalyst Plant Sabic Research & Development Riyadh, Ksa

• Manage instrumentation related corrective and preventive maintenance activities in accordance with agreed Code of Practice and Procedures ensuring technical integrity and HSE targets are met in a professional and cost effective manner.• Responsible for the implementation of the changes in Instrument Design Philosophy, Cause and Effect Diagrams, Control and Safeguarding Narratives, Loop Drawings, Functional Schematics, & Logic Diagrams as per the site requirement.• PM & CM process… Show more • Manage instrumentation related corrective and preventive maintenance activities in accordance with agreed Code of Practice and Procedures ensuring technical integrity and HSE targets are met in a professional and cost effective manner.• Responsible for the implementation of the changes in Instrument Design Philosophy, Cause and Effect Diagrams, Control and Safeguarding Narratives, Loop Drawings, Functional Schematics, & Logic Diagrams as per the site requirement.• PM & CM process plant instrumentation.• Jobs as responsible Calibration, Installation, maintenance & repairing of all types transmitter Electronic & Pneumatic FT,PT,LT,TT,DPT, PDT,TC, RTD, Interface level troll, Control valves, Solenoid valves, I/P Converter, Gauges, Analyzers, Installation & switches (P.S.H, PS.L, L.S.L and TSL) LEVEL TROLL and flow meter Show less

Mina Abdullah Refinery Knpc Kuwait

• Manage instrumentation related corrective and preventive maintenance activities in accordance with agreed Code of Practice and Procedures ensuring technical integrity and HSE targets are met in a professional and cost effective manner.• Responsible for the implementation of the changes in Instrument Design Philosophy, Cause and Effect Diagrams, Control and Safeguarding Narratives, Loop Drawings, Functional Schematics, & Logic Diagrams as per the site requirement.• PM & CM process… Show more • Manage instrumentation related corrective and preventive maintenance activities in accordance with agreed Code of Practice and Procedures ensuring technical integrity and HSE targets are met in a professional and cost effective manner.• Responsible for the implementation of the changes in Instrument Design Philosophy, Cause and Effect Diagrams, Control and Safeguarding Narratives, Loop Drawings, Functional Schematics, & Logic Diagrams as per the site requirement.• PM & CM process plant instrumentation. Show less

• To use preventive maintenance programmed in accordance with company requirements and as directed by the team lead• Testing/checking of instrument control loop to local panel and distributed control system (DCS).Carried out wellhead checks and resetting of pilot valves (Cameron) at the wellhead.• Maintenance / repairs and planning ahead so as to avoid the risk of delay through equipment breakdown• Upgrade the DVC positioner of the control valves from HC to PD, and make the benefit… Show more • To use preventive maintenance programmed in accordance with company requirements and as directed by the team lead• Testing/checking of instrument control loop to local panel and distributed control system (DCS).Carried out wellhead checks and resetting of pilot valves (Cameron) at the wellhead.• Maintenance / repairs and planning ahead so as to avoid the risk of delay through equipment breakdown• Upgrade the DVC positioner of the control valves from HC to PD, and make the benefit of the Diagnostics capabilities. Show less

India

Work Description:• Able to do Troubleshooting and maintenance of all types of Gas Turbines devices and all process instruments.• Ability to use and interpret phase testers, Repair or replace control devices such as switches, multi meter instrument, mega ohmmeter and proximity sensors, pushbuttons, contactors, motor other testing equipment starters, transmitters, etc.• Good skill to prepare work order and able to change suitable change in it.• Have to do good communication with… Show more Work Description:• Able to do Troubleshooting and maintenance of all types of Gas Turbines devices and all process instruments.• Ability to use and interpret phase testers, Repair or replace control devices such as switches, multi meter instrument, mega ohmmeter and proximity sensors, pushbuttons, contactors, motor other testing equipment starters, transmitters, etc.• Good skill to prepare work order and able to change suitable change in it.• Have to do good communication with CRO, Field Operators, PTW Co coordinators, and all production departments. Have to report and notify all trouble belongs to instrument and process. Show less

Bachelor Of Engineering (B.E.), Instrumentation & Control Engineering, A

Activities and Societies: very good

Be- Bachelor Degree, Engineering In Instrumentation & Control System, A