Mohit Singhal Email & Phone Number

Montreal, Qc, Ca

Mirabel, Quebec, Canada

• Ensuring compliance with environmental regulations, specifically focusing on chromate-free coatings per REACh standards. • Serving as the focal point and responsible for the organization's localized brush plating coating processes cadmium and Zn-Ni. • Certified in Cadmium and Zn/Ni plating, adhering to Mil-STD-865, BAPS 160-031, and AMS 2451 requirements.• Experienced as a focal for reviewing and evaluating technical documents related to landing gear components.• Certifying shot… Show more • Ensuring compliance with environmental regulations, specifically focusing on chromate-free coatings per REACh standards. • Serving as the focal point and responsible for the organization's localized brush plating coating processes cadmium and Zn-Ni. • Certified in Cadmium and Zn/Ni plating, adhering to Mil-STD-865, BAPS 160-031, and AMS 2451 requirements.• Experienced as a focal for reviewing and evaluating technical documents related to landing gear components.• Certifying shot peening process technique sheets to ensure quality adherence per Airbus standards.• Documented comprehensive material qualification test plans for corrosion analysis, coatings, etc., collaborating with the In-service AIRBUS team, laboratories and suppliers, and analyzing and compiling the test results.• Demonstrating strong knowledge of military and aerospace standards, including MIL specs, federal regulations, BAPS, A2PS, ASTM, ISO, and SAE specifications, to ensure compliance and quality in all material and process engineering activities.• Currently participating in Material Review Board (MRB) training.• Proficient in working with composites (GFRP/CFRP), various steel grades (carbon, low-alloy, stainless steel, high-strength steel, precipitation-hardened steel), Aluminum Alloys, Titanium Alloys, and Aluminum-Lithium Alloys. Show less

Montreal, Quebec, Canada

• Achieved an 80% increase in adhesion of Nano-functional coating on metallic surfaces, roof coating polymer.• Compared the adhesion strength of spray-coated substrate and the applicator substrate, resulting in a 30% increase.• Tested and optimized the introduction of a new hybrid coating to reduce the impedance of skin-electrode contact.• Formulated and tested mechanical properties of various coating formulations.

Dorval, Quebec, Canada

• Determined and effectively managed to reduce 22% of the monthly budget for AIRCANADA catering.• Effectively forecasted, planned, and scheduled supply orders and invoice completions based on the company’s ERP software, WINREST, and SIMARD of AIRCANADA.• Established inventory targets, stock levels, and risk mitigation strategies, and managed flexibility to optimize inventory.• Efficiently managed and supervised a team of 15 storekeepers, including forklift operators and team… Show more • Determined and effectively managed to reduce 22% of the monthly budget for AIRCANADA catering.• Effectively forecasted, planned, and scheduled supply orders and invoice completions based on the company’s ERP software, WINREST, and SIMARD of AIRCANADA.• Established inventory targets, stock levels, and risk mitigation strategies, and managed flexibility to optimize inventory.• Efficiently managed and supervised a team of 15 storekeepers, including forklift operators and team supervisors, to ensure food hygiene and health safety per Canadian Food & Health Safety.• Established a strong network with suppliers and logistics to ensure timely delivery and rotation of stock. Show less

Montreal, Quebec, Canada

• Managed, documented, and maintained laboratory chemical data and safety sheets, daily logs, and equipment records.• WHMIS safety and Lab design certified to implement health and safety norms and Good Laboratory Practices (GLP).• Assisted in the preparation and administration of laboratory examinations, demonstrations, and supervision.• Operated and calibrated various laboratory equipment such as balances, pH meters, calorimeters, and spectrophotometers.• Supported faculty with… Show more • Managed, documented, and maintained laboratory chemical data and safety sheets, daily logs, and equipment records.• WHMIS safety and Lab design certified to implement health and safety norms and Good Laboratory Practices (GLP).• Assisted in the preparation and administration of laboratory examinations, demonstrations, and supervision.• Operated and calibrated various laboratory equipment such as balances, pH meters, calorimeters, and spectrophotometers.• Supported faculty with advanced troubleshooting, resolving complex problems, and assisting with special projects.• Maintained laboratory supplies by inventorying stock, placing orders, and verifying receipts, while also maintaining a strong network of suppliers. Show less

Montreal, Quebec, Canada

• Investigated and experimentally characterized aeronautical-grade aluminum, titanium, and steel alloys in terms of surface integrity and coefficient of restitution (CoR).• Conducted literature reviews, surveys, laboratory experiments, and other research, compiling research results and material documentation, and assisting professors in analyzing results for use in scholarly publications.• Planned, analyzed, arranged, and executed research techniques, procedures, and tests to create… Show more • Investigated and experimentally characterized aeronautical-grade aluminum, titanium, and steel alloys in terms of surface integrity and coefficient of restitution (CoR).• Conducted literature reviews, surveys, laboratory experiments, and other research, compiling research results and material documentation, and assisting professors in analyzing results for use in scholarly publications.• Planned, analyzed, arranged, and executed research techniques, procedures, and tests to create representative graphs and charts highlighting results for presentations.• Performed statistical, qualitative, and quantitative analysis on tested samples, interpreting experimental findings. Show less

St-Étienne, Auvergne-Rhône-Alpes, France

• Experimentally investigated the effect of potential femtosecond laser peening on surface integrity parameters such as hardness using Nano-indenter, micro-hardness, residual stress using XRD, and roughness using Alicona 6.0.• Conducted surface characterization of aeronautical-grade aluminum alloys using various advanced characterization techniques such as SEM, AFM, XRD, Nano-indentation, and Hardness testing.

Ghaziabad, Uttar Pradesh, India

• Set up and managed laboratory equipment and apparatus, and prepared solutions of liquids, reagents, and samples of nanoparticle superhydrophobic coatings before the final manufacturing production batch.• Managed laboratory experiments, compiled records, and interpreted experimental or analytical results.• Developed and conducted programs for sampling and analysis to maintain quality standards (ISO, ASTM) of raw materials, chemical intermediates, and products as per company-set… Show more • Set up and managed laboratory equipment and apparatus, and prepared solutions of liquids, reagents, and samples of nanoparticle superhydrophobic coatings before the final manufacturing production batch.• Managed laboratory experiments, compiled records, and interpreted experimental or analytical results.• Developed and conducted programs for sampling and analysis to maintain quality standards (ISO, ASTM) of raw materials, chemical intermediates, and products as per company-set standards.• Assisted in the design and fabrication of experimental apparatus, lab settings, and machine design, while supervising manufacturing operations.• Worked with different polymer resins such as acrylic, epoxy, and clear polyurethane. Assisted in conducting chemical experiments, tests, and analyses with binders, pigments, and polymers.• Determined paint flow, viscosity, and coating quality through visual inspections and viscometers. Show less

Kassel Area, Germany

• Conducted economic and technical feasibility analysis in the recycling of warm edge spacer composite waste.• Conducted research into the development of innovative recycling processes and managed scientific data.• Designed, evaluated chemical processing, and associated pilot plant unit recycling process.• Conducted quality control test as per the company standard to ensure the quality check of recycled products using FTIR, DSC and MFI analysis.• Cost analysis to ensure… Show more • Conducted economic and technical feasibility analysis in the recycling of warm edge spacer composite waste.• Conducted research into the development of innovative recycling processes and managed scientific data.• Designed, evaluated chemical processing, and associated pilot plant unit recycling process.• Conducted quality control test as per the company standard to ensure the quality check of recycled products using FTIR, DSC and MFI analysis.• Cost analysis to ensure approximately annual savings of 150,000 euro/unit.• Gathered, arranged, and corrected research data to create representative graphs and charts highlighting results for presentations.• Planned, modified, and executed research techniques, procedures, and tests.• Assessed data using scientific methods while following important specifications. Show less

Ghaziabad, Uttar Pradesh, India

Teaching Assistant/lecturer1) Responsible for conducting workshops, practical labs2) Responsible for tutorials on manufacturing science and head coordinator3) Associate member of the college management committee and Exam coordinator.

Ghaziabad, Uttar Pradesh

Optimization of End-Lapping Reverse Rate1) Studied influencing parameters of rejection rate of inlet engine valves.2) Optimized parameters with the Design of the Experiment (DoE).3) Reduction of reverse rate by 20%

Master Of Science - Ms, Mechanical Engineering, 3.07/4.0

• Research focused on developing an advanced shot peening process using aeronautical grade aluminum, titanium and steel alloy.

Master Of Science (M2), Tribology & Surface Engineering, 13.87/20

• Hands-on experience in surface characterization techniques such as SEM, TEM, nano-indentation, ARICONA 6.0 for surface roughness, AFM.

Master Of Science - Ms, Materials Engineering & Nanotechnology, 94/110(Hons.)

Activities and Societies: International Buddy Team Leader, Volunteer Expo Milano • Specialized course-based master program in the domain.

Bachelor Of Technology - Btech, Mechanical Engineering, 72/100

Activities and Societies: SAE India, Assocham, Rotary blood donation, Micro Small medium enterprises etc. • Research focused on the domain.