Morad Isaacian Email & Phone Number

Los Angeles, Ca, Us

Develop test plans, test software scripts (ATE) and test procedures to cover satellites system test requirements. Provide test and validation for design, functionality, software, hardware and system-test development and support manufacturing tests. • Develop Automated SW/HW verification/validation tests using Tcl scripting language programming. • Track, submit and update the ECRs and CCRs (Engineering & Code Change Requirements)• Process ECRs for existing test procedures, support first time test procedure runs and troubleshooting • Inform managers, developers and testers about errors and abnormal data• Generate, review and analyze test procedures and reports• Research and locate efficient hardware for support the assembly and system tests• Validation test procedure scripts against simulators, emulators and test beds.

Jariet Technology, Redondo Beach, CA (Consultant) 6/2020 – 7/2021Senior Software and Hardware Test Engineer – R&D Replacement of conventional RF/analog systems with millimeter wave ADCs and DACs to perform frequency conversion and filtering operations in the digital domainDirect sampling of microwave signals, or sampling at a high microwave intermediary frequency• Design and expand Automated SW/HW verification/validation Tests using Python • Increase the test coverage reliability by adding and expanding the automated test.• Develop Automated test for ASIC test (WAFER) using Probe, switches, tools & equipment • Perform tests including DVT & formal tests, troubleshooting, failure analysis, test review, analysis• Develop test automation scripts for automated data, plots capture/analysis, Data Presentation • Design and develop Automated tests using Network and Spectrum Analyzers KEYSIGHT Agilent, Signal Generators, Power supplies, Ethernet, etc. (100MHz-40GHz)• Engineering Validation Test (EVT), Design/Development Test (DVT)• Design and Perform environmental and temperature tests. Development and Product Support.

El Segundo, Ca, Us

Teledyne Controls, LLC. El Segundo, CA 6/2011 – 4/2020Senior Software & Hardware Test Engineer – R&D From Requirements to Production, designed and integrated automated test solutions for commercial avionics LRUs. Provided test and validation for functionality, software, hardware & system-test product development, support production & customer repair. Supported Aerospace/Aviation with data acquisition & management systems, wireless data transfer systems, flight data analysis, data loading solutions & Aircraft Network Systems /FAA Reg.-Designed and developed Automated SW/HW verification/validation Tests using ATEasy. -Developed system/sub-systems test, test cases & strategies, EVT, DVT, black box & white box tests.-Achieved 75% reduction in test times compared to manual testing while increasing test coverage.-Involved new temperature and voltage test methods, which eliminated frequent tester downtimes and bulky test equipment. Product Support Engineering.-Increased the reliability and replaced obsolete test methods for 6 airplane FDAU (Flight Data Acquisition Units), IDMU (Integrated Data Management Unit), Enhanced Airborne Data Loader (eADL) and Data Loader PMAT XS (Teledyne Portable Maintenance Access Terminal) -Built and executed test equipment and test fixtures, interface adapters (ITA) for integrated Test Systems and Test Program Sets (TPS).-Created Test Software to use Modular Acceptance Test Equipment (PXI) to test Wi-Fi, Radio, GPS, RS-232, RS-422, ARINC 717, ARINC 429 DITS, Discrete, Bluetooth, USB-FLEXCOM4, Display, DC/AC.-Performed tests, troubleshooting, failure analysis, test review & analysis, HALT&HASS.-Utilized DOORS and JIRA project management, SW release & defect/bugs track applications.-Developed ATP (Acceptance Test Procedures) Documents for production/maintenance/CR.-Established SDF/HDF (SW/HW Development Folder), Capture and Release Automated Test SW.-Ability to test up to 4 UUTs simultaneously for functional tests. API Testing.

PARADIGM: SENIOR SOFTWARE/FIRMWARE TEST ENGINEER. R&D ENGINEER PDS: INTEGRATION SOFTWARE TEST ENGINEER, SUPPORT THE SW GROUP DURING DEVELOPMENTNGP: SENIOR SOFTWARE TEST ENGINEER SUPPORT THE GROUP (BUG VERIFICATION)NINJA I & NINJA II: SENIOR SOFTWARE/FIRMWARE TEST ENGINEERIntegration Test Engineer, Support the Software group during development. API Testing. Regression, Integration Testing. Product Support. Software Test Group. Medical Device: Diabetes Division / insulin pump• Generate test procedures, test plans based on requirements• Develop system / sub-systems test, black box and white box tests • Design and develop software verification/validation test cases and strategies • Perform ad-hoc (exploratory methodology) tests, troubleshooting and failure analysis • Oversea Team Leader, Provide, Review, analyze test results, verify SW issues• Document and resolve issues; Write and/or review plans, specifications and reports that comply with defined practices and protocols (regulated industry: FDA, etc.).• Evaluate and recommend tools, technologies, and processes, • Design Control and Risk Management• Utilize DOORS requirements management and TestTrack defect management applications • Evaluate, and initiate new requirements in cooperation with Human Factors (risk analysis)• Support right to left languages’ requirements (e.g., Hebrew and Arabic)• Identified a problem with a language macro for automated testing through maintaining automated tests for multiple language tests and led a team to solve the problem• Assist and guide international outsource testing partners• Strategized and devised a requirement for specific simulators to be used during testing• Create and maintain requirements traceability matrixes, VCRM, MBSE• Analyzed hardware calibration problem and presented findings to team leaders• Utilized RF com. tool between insulin pumps and PC for programming the pump and collecting the pump’s historical data for post analysis and debugging.

SENIOR SOFTWARE/FIRMWARE & SYSTEM ENGINEER – VALIDATION ENGINEERSW Test/V&V Group. (Functionality, Software, Hardware) of new Respiratory / Medical Device• Generated and documented test data consistent with the test plans • Validated SDLC principles and took part in software release management• Conducted testing, utilizing existing test protocols or developed new ones as needed• Resolved engineering problems at the sub-system through system level. Generated UI (User Interface) specifications and test procedures, GUI (Graphic User Interface)• Validate, Investigate and documented the bugs of specific databases/TestTrack• FMECA, Design Control, Risk Analysis and Assessment in all stages of functionality• Performed specific tests at dedicated laboratories (outsource facilities)• Conducted testing in accordance with FDA regulations. API Testing. FAT&SAT.

SENIOR SOFTWARE & HARDWARE TEST ENGINEER – SUSTAINING ENGINEERDevelopment of induction Power Systems for mobile power applications (Military and Commercial)• Oversaw lab design and lab management, manual and automated tests, DVT. V&/V. • Performed a diagnostic and failure analysis including troubleshooting. Performed maintenance on the LabVIEW programs. Factory Acceptance Testing (FAT) and/or Site Acceptance Testing (SAT).• Performed Regression Tests, Stress Tests, Load Tests and System Integration tests.• Developed test procedures, including test time reduction and support production testing• Designed and built prototypes, including integration, resolving Thermal issues • Performed risk analysis and assessment in all functional stages, bug tracking• Responsible for Lab design and Lab management, including hardware and software testing. (Manual and Automated - ATE). Verification/Validation. Bug Tracking.• Designed, developed, integration and tested existing and new products. Developed Test Plan/Procedure, including tests time reduction and support production testing• Searched for most efficient and high-quality components, including implementations• Performed Risk Analysis Assessment in any stage of functionality and performed the related tests.• Designed the network test database and produced test reports. Developed Test Fixtures.• Advised the Software Group; adhered to the Software Development Life Cycle (SDLC) principles, and Fundamental Programming Concepts • Supported new products from design to manufacturing. Interfaced with manufacturer subcontractors• Implemented and integrated new features into the new or existing systems/product• Design/Develop PCBs (printed Circuit Boards), build the prototype and test

PRINCIPAL EMBEDDED SOFTWARE & SYSTEM TEST ENGINEER – R & DEVICE DEVELOPER I) Development of Biomedical Diagnostic Device: SW/HW such as Ultrasound, Wireless, standalone SW/HW fixture, Function Generators, Vibration/Acoustic Tools / Detectors and Signal Analyzers• Converted conceptual concepts into working products, Design Control & Risk Management • Led team, Lab Manager, EVT, DVT, database structure • Utilized LabVIEW software for semi & full automated testing.• Conducted code reviews and maintained the software to meet the changes. • Oversaw experimental measurements in vitro & in vivo. Sustaining Engineer. FAT&SAT.• Supported the Advancement of several projects by innovating special solutions • Created and executed procedures for manual and automated testing, regression tests and V&V• Performed ad-hoc (exploratory methodology) tests, troubleshooting, failure analysis • Prepared the system for UL and FDA. Performed animal and human studies. FAT&SAT.• Administered staff performance reviews and coaching as required and provided career development suggestions to direct reports• Using MATLAB to design/build control systems for test setups and testing. API Testing.• Utilized Function Generators, Arbitrary WG, Signal Generators, FPGA• Utilized Network and Spectrum Analyzers PNA & VNA, S Parameters II) Development of Wearable-Dialyses Device SENIOR EMBEDDED SOFTWARE & SYSTEM TEST ENGINEER – DEVICE DEVELOPER• Developed an “Alert-System” of Wearable-Dialyses and built the prototype• Validated SDLC and Fundamental Programming. Failure Analysis, FMEA/FMECA.• Performed risk analysis and integrated a flow meter, Bubble-Detector, Blood Leak Detector• Design Control & Risk Management• Evaluated all items/units of the system for Biocompatibility. • Prepared SW Flow-Chart and designed Circuit/System schematic• Supervised project development and work performed by the outsourced company• Supported the test and integration of alarms and status monitoring

B.Sc, Electrical/ Electronics Engineering; General Mechanical Engineering

Mechanical Engineering

Software Engineering

Management And Maintenance