Matthew King, Pe Email & Phone Number

Tullahoma, Tn, Us

Arnold Afb, Tennessee, Us

Fluid and Thermodynamic systems and equipment design

Sugar Land, Texas, Us

Performed forensic evaluations of products (e.g. appliances); and commercial and light industrial failures and incidences.• Evaluated initial scope, confirmed with client. • Determined need for non-destructive examination and sampling. Developed test plans. Purchased, calibrated, and maintained test equipment as needed to perform evaluations.• Traveled to location, performed inspections, photographed, took measurements and performed non-destructive examinations. • Retrieved and retained original products, parts, samples and installations as needed. Obtained engineering documentation as available and needed. • Evaluated results, documentation, and other pertinent information. Developed sound basis for cause of events. • Developed report illustrating findings, results, and conclusions. Submitted for peer review. Issued reports.

Tokyo, Jp

Served as site subject matter expert for Boiler, Steam, Cooling Tower, Hot Heating Water. Tempered Water, Fire, Life Safety and Plumbing Systems & Equipment.• Served as Technical Leader on multiple projects including redundant fire pump addition, alcohol yard foam suppression and flame detection. Supported other plant projects with operations and production objectives and interface changes with fire, life safety and regulated trades. Developed multiple system modifications and improvements.• Developed and implemented: Multiple fire systems Inspection, Maintenance, Test, Repair & Training programs for building and campus fire protection systems, features and infrastructure. (NFPA 10, 25, 72, 80, 92, 101, 2001 and IBC/UL codes).• Developed and implemented NFPA 70, 77 & 78 Bonding inspection program for NFPA 30 flammable systems through-out campus• Applied FDA regulations (21 CFR Parts 11, 210, 211, 610 and 820) to process changes and modifications (Trackwise system).• Coordinated Plan reviews and permits with county building department and state fire marshal’s office fire, life safety and hazmat division(s); and third party engineers where present on behalf of company.• Deliverables included: vendor bid packages, bid evaluations, quality system change control, user requirement specifications, technical guidelines, safety reviews, conceptual design presentations, contracts, purchase orders, inspection, testing, maintenance, and repair plans, scope of work documents, schedules, standard operating procedures, and preventive maintenance plans.

Geneva, Switzerland, Ch

Served as site subject matter expert for Facilities Department systems and equipment including Compressed Air, Nitrogen, Chilled Water, HVAC, Fire, Water, Building Management Systems & Site Infrastructure.• Site Energy Manager: Monitored and tracked site utility consumption (Water, Wastewater, Gas, Power, etc.). Notably discovered and recouped significant overcharge from the power provider.• Represented department for Lightstream 3+ Expansion (3 new production lines). Reviewed and approved design, resolved request for information, inspected and approved final construction.• Developed and implemented multiple small capital projects.• Applied FDA regulations (21 CFR Parts 11, 210, 211, 800-898) to process changes and modifications for Facilities GxP maintenance work and projects (Trackwise system).• Developed and managed department internship/co-op scope and content; mentored multiple engineering student interns. Mentored multiple interns in project and engineering skills.• Deliverables included: equipment sizing calculations, emergency evacuation plans, one-line drawings, specifications, bid evaluations, quality system change controls, intern program definition, user requirement specifications, safety reviews; preliminary project schedules, budgets, contracts, purchase orders, department capital plans and reports, utilities consumption logs, calibration requirements definition and scope of work documents.

Mobile, Al, Us

Contracted position - developed multiple small and mid-sized capital projects for paper manufacturing site utilizing client’s capital project methods; • Submitted projects through corporate approval process ($100K-$3M)• Systems & equipment included: induced draft fan replacement, siding replacement, arc flash upgrades, analyzer upgrades, anodic protection, recovery boilers, labeler machine upgrades, “bald eagle relocation” (a federal process) and a variety of other equipment, systems, and infrastructure.• Deliverables included project schedules, project approval packages, scope of work documents, budgets, spend curves, return on investment, internal rate of return, and depreciation calculations.

Blairstown, New Jersey, Us

Contracted position - developed and managed multiple small to mid-sized capital projects for surfactant manufacturing site utilizing client capital project methods (from inception through turn-over) • Submitted projects to corporate approval process ($20K-$2M). Managed approved projects through completion.• Systems & equipment included: process wastewater, storm water, outfall, wastewater treatment, truck unloading, reactor containment, and other various plant equipment improvements including a variety of other equipment, systems, and infrastructure.• Deliverables included project schedules, capital appropriations requests, scope of work documents, project budgets and spend reports, contracts, purchase orders, design documents, test plans and turn-over plans.

Memphis, Tennessee, Us

Planned, developed, implemented, and managed reliability, maintenance, and capital improvement projects ($100K-6.5M) from initial concepts through project development, design, construction and turn-over utilizing the International Paper’s Project Development Process (PDP) • Systems & equipment included: ventilation, power boilers, recovery boilers, various pumps, woodyard, paper machine, precipitators, chutes & conveyors, riverbank stabilization, elevators, roof replacements, wastewater, landfill, elevators, galvanized steel and concrete maintenance, steam, compressed air, and a variety of other equipment, systems, and infrastructure.• Deliverables included project schedules, project approval packages, scope of work documents, budgets, spend curves, return on investment and internal rate of return calculations, depreciation, contracts, purchase orders, test plans, turn-over plans, operability assessments and lessons learned. • Mentored junior engineers in project management and project engineering skills.

Houston, Texas, Us

Developed, supported, led, and reviewed proposals, preliminary and detailed design scope, and deliverables for Industrial (Pulp and Paper, Plastic, Other Heavy Industrial Manufacturing/Process), Power Generation and Water Business Units • Served in multiple roles as Process (design), Safety and Project Engineer, and Outage Manager. • Equipment included: Heat Recovery Steam Generators (HRSGs), Flash tanks, blowdown tanks, boilers, desuperheaters, kettle boilers, utility boilers, biomass boilers, steam turbines, over pressure protection, gas turbines, simple & combined cycle plant design, cogeneration plant design, turbine bypass valves, boiler feedwater pumps, condensate pumps, mixers, heat exchangers, fuel gas equipment: knock-out drums, performance heaters, dewpoint heaters, scrubbers, pressure regulators, reverse osmosis systems, cooling towers, chlorine dioxide injection, flocculant tanks, clarifiers, zero liquid discharge system, crystallizer, ultra- filtration, and other industrial equipment.• Deliverables included: design proposals; equipment sizing, heat and mass balance, over pressure protection calculations and records, valve lists, line lists, equipment lists, motor lists, specifications, datasheets, P&IDs, vendor bid packages, bid evaluations, heat and mass balances, test plans, system design descriptions, company technical guidelines, safety review (PHA/What-if), and design packages; project schedules, project approval packages, scope of work documents, budgets, contracts, purchase requisitions, test plans, turn-over plans, supplier and project logistics plans and lessons learned.• Mentored junior engineers.

Schenectady, Ny, Us

Using GE's Tollgate New Product Process, developed, performed, coordinated, and led conceptual through detailed new product design (fabrication, testing, and standardization) of gas turbine accessory equipment.• Systems for new and existing units of multiple turbine frame sizes and vintages of production.• Deliverables included design proposals and reviews, calculations, specifications, ordering drawings, datasheets, P&IDs, schematics, vendor bid packages, operations and maintenance manuals, performance test plans, and standard design basis documentation development.• Systems and Equipment included: Fuel Gas, Fuel Gas Conditioning (performance heater, scrubber, regulator, scrubber, knock-out drums, etc.), Liquid Fuel, Atomizing Air, Water Injection, Trip Oil, Hydraulic Oil, Lube Oil, Inlet Heating, Fire Protection, Heating and Ventilation, Hazardous Area Protection, Carbon Dioxide Fire Suppression, Hazardous Gas and Fuel Gas Purge systems; pumps, fans, piping, vessels, heat exchangers, control valves, stop valves, separators, scrubbers, filters, strainer, VFDs, chillers, duct, building enclosures and equipment.• Led multiple new product introduction design efforts, tollgate reviews and system design safety reviews.• Certified Six Sigma Greenbelt - supported and applied Six Sigma Program as part of daily activities. • Mentored junior engineers

Irving, Texas, Us

Developed, performed, coordinated, and led design and design retrofit of coal-fired power plant environmental systems and equipment.• Equipment and Systems included: SCRs, SNCRs, water cannons, soot blowers, CEMS, activated carbon injection systems, compressed air, and water systems • Deliverables produced included: schedules, design proposals, calculations, specifications, datasheets, P&IDs, valve lists, line lists, equipment lists, motor lists, vendor bid packages, and design/construction packages.

Developed, performed, coordinated, led design and design retrofit of in fluid, thermodynamic and radiological systems, and equipment to support radioactive material confinement, transport, removal, and treatment. • Systems & equipment included: tritium, radioactive waste, steam, compressed air, nitrogen, argon, cooling water and ventilation. equipment included: pumps, heat exchangers, pressure relief valves, pressure vessels, compressors, tanks, piping systems, control valves, and custom radiological treatment process equipment.• Deliverables included: schedules, calculations, over pressure protection calculations and records; valve, line, equipment and motor lists; specifications, datasheets, P&IDs, vendor bid packages, test plans, material receipt inspection plans, quality requirements documents, system design descriptions, company technical guidelines, safety reviews and design change packages. • Participated in and led design safety reviews • Certified Six Sigma Yellow belt - supported and applied Six Sigma Program as part of daily activities • Mentored junior engineers

Bs, Mechanical Engineering

Pre-Engineering

Continuing Professional Studies, Liberal Arts