Matthew Traum Email and Phone Number
Gainesville, FL, US
Matthew Traum's Location
Gainesville, Florida, United States, United States
Matthew Traum's Contact Details
Matthew Traum work email
- Valid
- Valid
- Valid
- Valid
- Valid
Matthew Traum personal email
n/a
Matthew Traum phone numbers
About Matthew Traum
At the University of Florida (UF), Dr. Matthew J. Traum is Principle Investigator of GatorKits Lab, Associate Director of the Center for Engineering Design, and an Instructional Associate Professor of Mechanical & Aerospace Engineering. Dr. Traum also serves as an elected Director of Sigma Xi, the international scientific research honor society, and an appointed Director of RaveBio, Inc., a biotech equipment startup UF spin-off.Previously, Dr. Traum was founding CEO at Engineer Inc., an education technology startup. Traum invented and trademarked @HOLM™ lab kits enabling on-line learners to build and run hands-on engineering experiments at home.Before founding Engineer Inc., Dr. Traum was an Associate Professor and Director of Engineering Programs at Philadelphia University. Dr. Traum led PhilaU’s Mechanical Engineering Program through a successful ABET interim visit resulting in no deficiencies, weaknesses, or concerns.Previously, Dr. Traum was an assistant professor at the Milwaukee School of Engineering (MSOE), one of the top-ten undergraduate-serving engineering universities in the U.S. Dr. Traum coordinated MSOE's first crowd-funded senior design project. He also co-founded with students EASENET, a start-up renewable energy company to commercialize waste-to-energy biomass processors.Dr. Traum began his academic career as a founding faculty member in the Mechanical & Energy Engineering Department at the University of North Texas where he established an externally-funded researcher incubator training undergraduates to perform experimental research. As PI or Co-PI, he leveraged his undergraduate research program to secure over $700K from sponsors including NSF, NASA Space Grant, ASHRAE, and the Texas State Energy Conservation Office.Traum received a Ph.D. in mechanical engineering from MIT where he held a research assistantship at MIT’s Institute for Soldier Nanotechnologies. At MIT he invented a nano-enabled garment to provide simultaneous ballistic and thermal protection to infantry soldiers. Dr. Traum also holds a master’s degree in mechanical engineering from MIT with a focus on cryogenics.
Matthew Traum's Current Company Details
University Of Florida
View
Senior Lecturer and Instructional Associate Professor
Gainesville, FL, US
Matthew Traum Work Experience Details
-
Senior Lecturer And Instructional Associate ProfessorUniversity Of FloridaGainesville, Fl, Us
-
DirectorSigma Xi, The Scientific Research Honor Society Jul 2024 - PresentResearch Triangle Park, Nc, UsSigma Xi Directors are elected to 3-year terms and manage the activities, property, and affairs of the Society. The Board of the Society simultaneously serves as the Board of the Corporation and serve in elected positions as volunteers.https://www.sigmaxi.org/about/bios/s---t/matthew-traum-2023 -
Principal InvestigatorGatorkits Lab - Uf Oct 2022 - PresentGainesville, Fl, Us -
Senior Lecturer & Instructional Associate ProfessorUniversity Of Florida Aug 2019 - PresentGainesville, Florida, UsUniversity of Florida is ranked as the #5 top public university in the U.S. (#30 overall) by U.S. News & World Report making it the highest ranked public university with an engineering program in the southeastern United States. Florida's Flagship public university, UF is a member of the Association of American Universities (AAU), a consortium of the nation's 63 most elite higher education institutions.
-
Associate EditorJournal Of Online Engineering Education (Joee) Mar 2020 - Presenthttp://www.onlineengineeringeducation.com/The Journal of Online Engineering Education (JOEE) is the leading resource for online engineering education. It seeks to disseminate pedagogical research related to this emerging form of education. JOEE covers research and information about topics such as: online distance education, online master’s programs in engineering, online engineering technology education, hybrid courses, usage of online content with traditional campus based engineering education, and online and automated laboratories.
-
DirectorRavebio Jul 2023 - Aug 2024RaveBio is a biotechnology startup founded to revolutionize the biological shaker table industry through innovative design and engineering. Dr. Traum serves as a member of the Board of Directors of RaveBio. -
Chief Executive OfficerEngineer Inc. Jun 2016 - Sep 2022Engineer Inc. was a Florida-based engineering education technology on-line learning company. The company was absorbed by the University of Florida in October 2022 to continue operation as the GatorKits Lab. The company created inexpensive, portable, desktop-scale educational kits that evoke phenomena previously requiring full-scale lab equipment for visualization and measurement with fidelity exceeding brick-and-mortar educational labs. Engineer Inc.’s “Hands-On Learning Module” @HOLM™ kits anchored a new generation of distance engineering education that combines the Web’s vast knowledge repository with engaging, applied experiential learning.
-
Stem InstructorSaint Francis Catholic Academy Jan 2018 - Jun 2018St. Francis Catholic Academy is a four-year, coeducational, college-preparatory and AP Capstone high school, accredited by the Southern Association of Colleges and Schools on Accreditation and School Improvement (SACS CASI) AdvancEd. It is a member of the National Catholic Education Association and the College Board. St. Francis is ranked by Niche.com as the #2 in private high school in Alachua County, and it is ranked among the top 30% of private high schools in Florida.
-
Adjunct FacultyJacksonville University Aug 2017 - Dec 2017Jacksonville, Fl, Us -
Adjunct Associate ProfessorTennessee State University Jan 2017 - Jul 2017Nashville, Tn, Us -
Associate Professor & Director Of Engineering ProgramsPhiladelphia University Jul 2014 - May 2016Philadelphia, Pa, UsPhiladelphia University is a student-centered institution that prepares graduates for successful careers in an evolving global marketplace by providing the premiere professional education of the 21st Century. By blending the liberal arts and sciences, professional studies, interdisciplinary learning, and collaborations in and out of the classroom, PhilaU students learn to thrive in diverse and challenging environments. Philadelphia University is an experiential learning community where integrity, creativity, curiosity, ethics, responsibility, and the free exchange of ideas are valued.My responsibilities and accomplishments include:• Administrative Head overseeing seven full-time engineering faculty in four degree-granting programs: ° B.S.E. Engineering (ABET-Accredited) ° B.S.E. Mechanical Engineering (ABET-Accredited) ° M.S. Textile Engineering ° Ph.D. Textile Science and Engineering• Conducted Mechanical Engineering program through successful ABET Interim Visit resulting in NO deficiencies / concerns• Negotiated and implemented a 3+2 physics/engineering degree articulation agreement with West Chester University• Oversaw total engineering Web site revision reflecting new Program Educational Objectives, Mission, and capabilities• Instructed 2 unique undergraduate courses: Fluid Dynamics and Introduction to Engineering -
Co-Founder & Chief Technology Officer (Cto)Easenet, Inc. Jan 2012 - Jul 2014EASENET Inc. is a Veteran founded renewable energy start-up company focused on combined heat & power and biomass-to-energy technologies. EASENET is transitioning a fossil fuel dependent energy system to one that incubates sustainable communities and empowers individuals.My responsibilities and accomplishments include:• Led a team of 4 to design, build, & test a residential-scale flexible fuel combined heat & power system• Oversaw design, fabrication, & testing of prototype solar- fired pyrolysis processor for biomass-to-heat-and-power• Solved technical challenges arising from synthesis & combustion of wood gas for residential heat & power creation
-
Assistant ProfessorMilwaukee School Of Engineering -- Department Of Mechanical Engineering Aug 2011 - Jul 2014Milwaukee, Wi, UsMSOE is a private, undergraduate-serving university with 2,600 students offering 18 bachelor’s degrees and 10 master’s degrees in the areas of engineering, technology, and health. The university enjoys national academic standing as one of the top 10 undergraduate-serving engineering universities in the United States; well-established ties to business and industry; and extremely high placement rates among its graduates.My responsibilities and accomplishments include:• Conducted experimental research on sustainable biomass-to-heat-&-power, aquaponic agriculture, & thermal transport• Awarded competitive grants and fellowships totaling $92,026; $42,151 for research and $49,875 for education• Coordinated MSOE’s first crowd-funded undergraduate research project; raised $2,500 through Microryza.com• Instructed 10 unique undergraduate courses in energy-thermal-fluid science, manufacturing, and engineering design• Innovated teaching techniques: competitive design & build projects, servant leadership, flipped classroom• Founded Association of Energy Engineers (AEE) and ΣΣΠ (Energy Engineering Honors Society) student chapters -
Assistant ProfessorUniversity Of North Texas -- Department Of Mechanical And Energy Engineering Jun 2007 - Aug 2011Denton, Tx, UsThe University of North Texas -- Denton is the flagship university of the University of North Texas System. Enrolling over 37,000 students, UNT is one of Texas' largest public universities offering 100 bachelor's, 83 master's and 37 doctoral degree programs. UNT is recognized as one of the 115 top research universities in the United States with a Carnegie Classification of "Doctoral University: Highest Research Activity (R1)".In 2006, UNT founded the Department of Mechanical and Energy Engineering (MEE), the first such energy-focused engineering department in the nation.My responsibilities and accomplishments include:• Co-Founded the MEE Department with 3 faculty colleagues: created curriculum, recruited students, established facilities• Conducted experimental research on sustainable solar power, energy storage, & energy efficiency in the built environment• Wrote 61 competitive research & education grant proposals; won 24, a 39% success rate• Awarded as PI or Co-PI competitive grants and fellowships totaling $709,846; $673,846 for research and $36,000 for education• Established a Texas Undergraduate Researcher Incubator to engage undergraduates in engineering research• Principal Investigator and Director of UNT’s Thermal Fluid Sciences Research Group• Created the MEE Capstone Senior Design Program; connected sponsors with students to commercialize products• Attracted 1st start-up to UNT Discovery Park Incubator – Solar Logic, a distributed concentrated solar power company• Chaired MEE UG Curriculum Committee; led 2008 ABET-driven curriculum update leading to successful 2013 ABET accreditation• Co-designed & oversaw undergraduate educational lab facilities: UG Teaching Lab & Senior Design Workshop• Designed & instructed 1 graduate & 9 undergraduate courses in energy/thermal/fluids, engineering design, & ethics• Established and advised student chapter of ΣΣΠ, the nation’s first Energy Engineering Honor Society -
Contributing EditorDesign News Magazine Jan 2007 - May 2011Design News is a multi-media engineering publication providing editorial content both in-print and online through the following conduits: monthly print magazine, bi-weekly technology eNewsletters, RSS feeds, and a popular website. Coverage at Design News is based on four key pillars, which are the backbone of just about every engineering design project: Electronics & Test, Automation & Control, Materials & Assembly, and Design Hardware & Software.My responsibilities and accomplishment include:• Maintained "I Have The Power!" blog column• Researched and wrote 160 on-line articles relevant to energy engineering and design, targeted for general readership• Generated over 10,000 unique page-hits per year and attracted 302 reader comments• Authored landmark magazine article on virtual worlds for engineering design - cited 41 times in on-line/in-print media
-
Research Assistant, Doctoral CandidateMassachusetts Institute Of Technology -- Institute For Soldier Nanotechnologies (Isn) Aug 2003 - Jun 2007Cambridge, Ma, UsDissertation Title: “Latent Heat Fluxes Through Nano-Engineered Porous Materials”Barriers of micro- and nano-scale polymer truss provide mechanical strength, light weight, and breatheability. Liquid evaporation and vapor transport through truss voids (pores) cools surfaces covered by the barriers, providing simultaneous protection from mechanical and thermal insult. One application is desert Soldier protection. Design of real systems employing this technique requires quantitative understanding of vapor transport within the truss pores and accompanying latent heat lift under ambient temperature and pressure.This research clarified how nanometer diameter pores affect surface cooling and water vapor transport owing to fluid rarefaction. Contrasting previous studies where pressure within capillaries of fixed diameter was modulated, here Knudsen Number (Kn) was systematically varied by changing pore diameter at constant pressure (one atmosphere). Cooling efficacy was assessed for porous membranes by simulating combined daytime desert solar and metabolic thermal load on humans. A new technique of continuously weighing the entire evaporation apparatus was developed, resulting it intrinsic pore diffusion coefficients for dilute water vapor in air deduced for barrier of varying pore diameter ranging from 39 to 14,400 nm.My responsibilities and accomplishments include:• Served as senior research student on U.S. Army-funded systems integration project to protect dismounted infantrymen• Invented new nanotechnology-enabled technique for simultaneous protection and surface cooling, 3 papers resulted• Utilized scanning electron microscopy to characterize and image porous membranes with features down to 100 nm.• Designed in Solidworks & built apparatus to simulate desert heat/mass transfer through porous membranes• Formulated integrated heat and mass transfer model in MATLAB to accurately predict performance of this system -
Research Assistant, Master'S Degree CandidateMassachusetts Institute Of Technology -- Institute For Soldier Nanotechnologies (Isn) Aug 2001 - Jul 2003Cambridge, Ma, UsThesis Title: “Development of a Cold End and High-Efficiency Valves for a One-Watt 10 Kelvin Cryocooler”This research presented the first comprehensive mechanical design for a feasible cold end unit capable of executing the expander portion of the coldest stage of a multistage Collins cycle cryocooler. The device developed is a working demonstration prototype for a future three-stage space-based cryocooler capable of lifting one Watt at 10 Kelvin.Emphasis was placed on development of the cryogenic cold valves and their integration into the cold end. An evolutionary design iteration process based on finite-element modeling was pioneered and posited to convergence to optimal valve geometry via computer modeling without the necessity of building or testing hardware.An experimental process for static benchmarking of the valves was also described, and sensitivity of the valves to various geometric tolerances was explored. A finite element model was combined with other analytical models and utilized to develop a series of first-order modeling approximations for several aspects of the cold end operation and performance.My responsibilities and accomplishments include:• Served as senior research student on industry/university/Army cryocooler miniaturization SBIR Phase 1. This team won a Phase II SBIR award to continue the work.• Applied finite element design using QuickField to converge upon optimal electro-magnetic (EM) valve geometry• Designed and conducted experiments to measure and quantify static performance of cryogenic EM valves• Built working prototype cryocooler (controlled using LabView) – integrated EM valves with cryocooler cold end
-
LecturerSimmons College -- Department Of Physics Sep 2005 - Jun 2006Boston, Ma, UsLocated in the heart of Boston's Fenway, Simmons College is a private women-focused undergraduate college and co-educational graduate school, which is a member of the six-school Colleges of the Fenway consortium. For more than a century, Simmons has offered a pioneering liberal arts education for undergraduates integrated with professional work experience.My responsibilities and accomplishments include:• Instructed weekly laboratory classes of 15 students as a component of introductory physics courses• Students in my lab sections achieved a mean score 11% above the class average on lab-related final exam questions• Established and advised Society of Physics Students (SPS) chapter – named best chapter in New England Region• Awarded $500 from Alumnae/i Association to establish monthly Simmons Science Students Seminar Series (S5) -
Sales EngineerNextek Power Systems Jun 2001 - Sep 2001Nextek Power Systems is a Detroit-based tech company dedicated to providing others with the power to save energy. Nextek systems leverage high efficiency power converters and smart controls to optimize energy usage while drawing power from renewables, batteries, and the grid. The technology reduces lighting ROIs and improves control functionality. Nextek provides the industry's only practical solution for powering LED luminaries.My responsibilities and accomplishments include:• Assisted in selling the first commercial Nextek solar-assisted lighting system to Whole Foods Market in Berkeley, CA• Trained distributors in system utilization, Direct Current lighting technology, and sales approaches• Advanced product value propositions and modeling tools for energy system analysis using MS Office (MS Excel)• Established & maintained technology partnerships & corporate alliances in the solar and building energy industries• Performed building energy audits of customer properties to identify energy- and cost-saving opportunities
Matthew Traum Skills
Research
Technical Writing
Matlab
Higher Education
Microsoft Office
Nanotechnology
Science
Statistics
Microsoft Excel
Data Analysis
Microsoft Word
Public Speaking
Teaching
Physics
Fundraising
Matthew Traum Education Details
-
Massachusetts Institute Of TechnologyMechanical Engineering -
Massachusetts Institute Of TechnologyMechanical Engineering
-
Uc IrvineAerospace Engineering
-
Uc IrvineMechanical Engineering
-
University Of BristolAerospace Engineering
Frequently Asked Questions about Matthew Traum
What company does Matthew Traum work for?
Matthew Traum works for University Of Florida
What is Matthew Traum's role at the current company?
Matthew Traum's current role is Senior Lecturer and Instructional Associate Professor.
What is Matthew Traum's email address?
Matthew Traum's email address is ma****@****ufl.edu
What is Matthew Traum's direct phone number?
Matthew Traum's direct phone number is +161723*****
What schools did Matthew Traum attend?
Matthew Traum attended Massachusetts Institute Of Technology, Massachusetts Institute Of Technology, Uc Irvine, Uc Irvine, University Of Bristol.
What are some of Matthew Traum's interests?
Matthew Traum has interest in Model Rocketry, Nanotechnology, Energy/thermal/fluids Engineering.
What skills is Matthew Traum known for?
Matthew Traum has skills like Research, Technical Writing, Matlab, Higher Education, Microsoft Office, Nanotechnology, Science, Statistics, Microsoft Excel, Data Analysis, Microsoft Word, Public Speaking.
Free Chrome Extension
Find emails, phones & company data instantly
Find verified emails from LinkedIn profiles
Get direct phone numbers & mobile contacts
Access company data & employee information
Works directly on LinkedIn - no copy/paste needed
Aero Online
Your AI prospecting assistant
Select data to include:
Total price:
$0.00
0 records × $0.02 per record
Download 750 million emails and 100 million phone numbers
Access emails and phone numbers of over 750 million business users. Instantly download verified profiles using 20+ filters, including location, job title, company, function, and industry.
Start your free trial