M.Talha Siddiqui Email & Phone Number

Karāchi, Sindh, Pakistan

• Fabrication• Erection• Inspection• Reporting• Rigging Study• Coordinating field activities• Vendor & Contractor dealing• Repairs and technical improvements• Material demand verify for execution• Meeting with contractor and stakeholders• P&ID• Shop drawings• Piping Layout• Factory Layout• Machine Layout• Steel Structure Drawings• Architectural Layout• Architecture 3D models• Preparation of BOQ/BOM & MTO• Another assigned task performsProject• Extension of Refinery: EPC project, Capacity: 300 TPD• Tank Farms• Facade Upgradation• Security & Admin Block• Solar Panels• Raya Project• New Head office• Handwash line• PIEDMC

Karāchi, Sindh, Pakistan

• To prepare Project schedules• To prepare S-Curve & Histogram• To prepare Manpower plan• To Participate in Tender Enquiries• Support Project Proposal work• Performs any other related duties as assignedProject• Tender Enquiries: Oil & Gas Sector

Karāchi, Sindh, Pakistan

• Attend Site Visit Meetings• Attending Daily meetings• Coordination with Site crew• Client & Contractor Meetings• To prepare Project detail schedule with baseline schedule• Submitting DPR, WPR & MPR• To prepare S-Curve & Histogram• To prepare Manpower & Equipment plan• Ensure quantum of materials for project• To Participate in Tender Enquiries• Updating Daily Progress Monitoring Sheet• Invoice verification• To monitor, update, and communicate the schedule to reflect current status and the impact of project changes and variations• Change order preparation• Support Project Proposal work• Guideline to Document controller & Auto-CAD draughtsman• Performs any other related duties as assignedProject• End User: SSGC, Client: Solar Turbine (Civil work, Installation ofGas Turbine driven centrifugal compressor 200 MMCFD with AllBOP at Shikarpur Headquarter)

Karāchi, Sindh, Pakistan

Planning’s Responsibilities.• Client & Contractor dealing.• Join Pre-Bid & Site Visits Meeting.• Submitting DPR.• To prepare Project time schedule.• Take off quantities from drawings.• Ensure quantum of materials for project.• To Participate in Project Enquiry working.• Performs any other related duties as assigned.CAD’s Responsibilities.• Draw Layout Plans. • Cutting Plans for fabrication.• Reverse engineering designs.• Developments of steel fabrication.• Design of Steel Structure (Mezzanine Floor).• Design of Air cooled heat exchanger for fabrication.• Making Piping Isometric, P&ID & Piping Plan Drawings.• To prepare Fabrication, Shop drawings & As-built drawings.• Design of Mechanical parts (Forming, Casting & Machining).• Making the Rigging and Lifting Study for unloading & erection.• Preparation of BOQ/BOM & MTO.• Dia-Inches Calculation & Drawings Evaluation.• Guideline to fabrication’s supervisor.Project:• End User/Client: JS. (Design work of LPG Plant).• End User/Client: BYCO. (Misc. Heat exchanger’s Retubing).• End User/Client: BYCO. (Misc. Air cooled heat exchanger’s fabrication and Erection).

Karachi, Pakistan

Key Responsibilities:• BOQ.• Cutting Plans.• Vendor dealing.• Prepare shop drawing.• New design as per standard.• Developments of fabrication.• Little bit role play of quality work.• Guideline to fabrication supervisor.• Take off quantities of material as per cutting plan.• Material provide to fabrication crew as needed.• Other assigned task perform. Project:• End User/Client: Nazir Concrete. (Cement Silo 100T’s fabrication and installation and Steel structure).• End User/Client: Artistic Milliners. (Chemical Reactor’s fabrication and installation).• End User/Client: Bahria Town. (Cone’s fabrication).• End User: Pakistan Railway, Client: NLC (Steel bridge’s fabrication sandblasting, painting and erection).

D.H.A, Karachi

Key Responsibilities:• Allocate work to subcontractor.• Performs material take offs prior to the requisitions for the project and report to the project manager.• Works very close with the project team to ensure that measurements, variations and contractual matters are properly recorded and notified.• Preparation of payment application and agreeing with Client.• Evaluates sub-contractors invoices and ensures the contractual obligations are satisfied and advices the project management on payments of the same.• Material issuance to reconciliation.• Preparation of final bill.• Estimation• B.O.Q• M.T.O• Billing.• Weld Map.• Cutting Plan.• Rigging Study.• Part Designing.• Welding linear inch.• Dia Inch Calculation. • Material wastage calculation.• Developments of Steel Fabrication.• Shell, Nozzle, Support & Layout.• As-built and shop drawings of Equipment & Miscellaneous Components.Projects:• End User/Client: Attock Cement Pakistan Ltd. (Steel Structure’s fabrication & erection. and Insulation.)• End User: PSO, Client: CMEC (Tank’s fabrication & supply).• End User: NRL, Client: CC-7 (Storage Tanks’s fabrication and erection, sandblasting and painting).• End User: Power China, Client: SEPCO-III (CW Pipeline’s Fabrication, Erection Sandblasting and Painting).• End User/Client: Cherat Cement Company Ltd. (Steel Structure & Piping’s fabrication and erection, & Equipment’s only erection.)• End User/Client: Novatex Ltd. (Piping)• End User/Client: Novatex Ltd. (Equipment’s erection).• End User/Client: Novatex Ltd. (Silo’s fabrication & erection).• End User/Client: NRL (Discharging Vessel’s fabrication, sandblasting and painting).• End User/Client: HUBCO (LP-3 Heater’s fabrication).• End User: Pakistan Navy, Client: Seamax (Steel Pile Marker’s fabrication).• End User: OGDCL, Client: Kerui Petroleum (KPD-667: Steel Structures & Storage Tank’s fabrication and erection, sandblasting and painting).

S.I.T.E Area, Karachi, Pakistan.

Key Responsibilities:• Cutting Plan.• Part Designing.• Developments.• Weight Extracted.• Material Summary.• Weight Calculation.• Shell, Nozzle, Support & Frets Layout• As built and shop drawings Miscellaneous Components.• Fabrication Drawings of Column, Heat Exchanger, Separators, Vessel & Air Heater.Projects:• End User/Client: Chasma Sugar Mills Ltd. (Distillation Plant’s fabrication).• End User/Client: Engro Polymer & Chemicals (Heat Exchanger’s fabrication)• End User/Client: Madina Sugar Mills (Pvt.) Ltd. (Distillation & Anhydrous Plant’s fabrication).• End User/Client: Unicol Ltd. (Heat Exchanger’s Refurbishment)• End User/Client: Fauji Fertilizer Bin Qasim Ltd. (Tube Sheet & Baffle’s machining)• End User/Client: Engro Polymer & Chemicals (Air Heater’s fabrication)• End User/Client: Engro Polymer & Chemicals (TT-302B Heat Exchanger’s fabrication)

S.I.T.E Area, Karachi, Pakistan.

Key Responsibilities:• ISO Working.• Daily & Monthly Reporting.• Part &Die Designing by AutoCAD/Pro-E/Creo.• CNC Machining Center & Wire Cut Operations.• New Development Designing by AutoCAD/Pro-E/Creo.• Ensure the availability of Man Power, Material, and Tooling to get target, Instruments, & its calibration.

S.I.T.E Area, Karachi, Pakistan.

Key Responsibilities:2nd Stage (In-charge):• Vendor dealing.• Program editing.• Check Night Shift.• Development Designing.• Operation Standard Designing.• CNC Lathe & CNC Gun drill Operation.• Post-delivery troubleshooting and problem resolution.• Ensure the availability of Instruments, Jigs, Gauges & its calibration.• Shift Management – to ensure the availability of man, material and tools to get target production.1st Stage (Supervisor):• Model changing.• Final Inspection report.• Daily & Monthly Logbook maintenance.• As built and shop drawings of Gears, Shafts, Jigs, Fixtures and Machinery components at AutoCAD.

B-Tech (Hons), Mechanical

B-Tech, Mechanical

D.A.E, Mechanical

D.B.A, Mathematics

Matric, Computer Science