AeroLeads people directory · profile
Muhammad Moeed Email & Phone Number
Testing Engineer Electrical
at
Grace Plus Contracting Company
LinkedIn matched
✓ Verified July 2026
3 data sources
Profile completeness 86%
Current company
Role
Testing Engineer Electrical
Location
Dammam, Eastern, Saudi Arabia
Company size
Who is Muhammad Moeed? Overview
A concise factual answer block for searchers comparing this professional profile.
Quick answer
Muhammad Moeed is listed as Testing Engineer Electrical at Grace Plus Contracting Company, a with 8 employees, based in Dammam, Eastern, Saudi Arabia. AeroLeads shows a matched LinkedIn profile for Muhammad Moeed.
Muhammad Moeed previously worked as Senior Testing Engineer Electrical at Grace Place Contracting Company and Assistant Manager Electrical at Novatex Limited - Official Page. Muhammad Moeed holds Bachelor Of Technology (B.Tech.) Honors Attested By Saudi Calture & Embassy, Electrical Engineering, A+ from Indus Instute Of Higher Education Pakistan.
Company email context
Email format at Grace Plus Contracting Company
This section adds company-level context without repeating Muhammad Moeed's masked contact details.
Grace Plus Contracting Company
Review company-level records connected to Muhammad Moeed before choosing the right outreach path.
Profile bio
About Muhammad Moeed
Seeking a challenging position and career oriented position in an esteemed organization that offers opportunities for professional in challenging environment.
Current workplace
Muhammad Moeed's current company
Company context helps verify the profile and gives searchers a useful next step.
Grace Plus Contracting Company
6 roles
Muhammad Moeed work experience
A career timeline built from the work history available for this profile.
Senior Testing Engineer Electrical
Grace Place Contracting Company
Assistant Manager Electrical
Working in Electrical and Instruments division as Assistant Manager.
Testing & Commissioning Engineer
Al-Gihaz Energy Services Gesco.
-Function & scheme check of 13.8kV, 33kV, 132kV & control room panel’s schemes.-Modification as per scheme function requirement.-Get approval for modification from CSD. -Testing for SAT as per FAT.-Power cables. -Current Transformers, Potential Transformers, Capacitance Voltage Transformers.-Lightning Arrestors, Surge Counters, Switchyard equipment test.-Air Circuit Breaker, Vacuum Circuit Breaker, (6.6KV, 13.8KV, 33KV, CB’S) SF6 Circuit Breakers (GIS) (33KV, 66KV, 132KV CB’S)-Energy meters for 13.8kV 33kV, Multi-function meters.-Metrosils & CT supervision (95) relays. -Trip circuit supervision (74) relays & all auxiliary relays use in sub station. -MCCB’S, battery charger, battery banks.-Power control center and motor control centre.-13.8kV switchgears online Partial Discharge testing proces- AC, DC Control scheme.- 415V LVAC, 110V DCDB, 110V battery charger schemes.- 13.8KV, 33KV SWGR mimic\ local and remote interlocking schemes.- 33KV, 66KV, 132KV, 220KV GIS (SIEMENS & ABB make) Local and Remote Interlocking Schemes.- 11KV, 33KV, 66KV, 132KV, 220KV LOCAL & Remote Synchronising Scheme.- 33KV, 66KV, 132KV, GIS (DOUBLE BUS) on Load Transfer Scheme Checks.- 132/33/13.8KV, System Interlocking Scheme.- OLTC, RTCC, & Parallel Operation Schemes.- 200MVA, 160MVA, 40MVA Transformers, OLTC, RTCC & Parallel Operations Schemes.- CT Secondary injection, Primary injection test up to relay end.- 13.8KV Partial BUSBAR Stability Test.- 13.8KV Partial BUSBAR Blocking Scheme.- 13.8KV VT Selection/ Synch Scheme.- 13.8kV Load Shedding Scheme.-Transformer protection, Transformer Differential Protection & REF Protection, Bus Bar protection and synchronizing scheme.-33KV, 132KV, BUSBAR (Both Single and Double Bus) Stability Test.-Stability end to end Test for line feeders, Overall stability test for line feeders, Cable feeders.
Electrical Engineer
Testing of Transformer up to 370 MVA and Protection Relays.List of Equipment in Use.• Severker 750 & 780.• MOM 2 micro ohm meter• Insulation Resistance Tester 15 kV• Insulation Resistance Tester 5kV• Earth Resistance Tester• Earth Resistance Clamp meter• Under Ground Cable Tracer with Signal Generator• Under Ground Cable Fault Locator Seba KMT• TDR (time domain reflect meter)• Secondary Current Injector • Primary Current Injector up to 3000 Amps at 3volts• Transformer Turn Ratio Tester single and 3 phase• BDV Tester (Di-Electric strength tester) for testing of transformer oil break down voltage in kVs.• Portable DGA (dissolve gas analyses)• Capacitance and dissipation factor tester for transformer oil bushings windings and core.• TM 1600 circuit breaker analyzer• Omicron CT analyzer• Battery Tester (Torkel 860)• Live Line Tester up to 122kV• Thermal Image Camera (fluk)Performing Tests on Transformer up to 370 MVA • Insulation resistance test (DAR & PI)• C & DF or tangent delta • DC leakage current test• DC winding low resistance test• TTR• Bushing C & DF• Core insulation test• Transformer oil test (Di-electric strength test, oil C & DF, DGA dissolve gas analysis test)
Jul 2012 - Feb 2015
Associate Electrical Engineer
Associate Electrical Engineer: July. 2004 - July. 2012. Karachi Electric Supply company.• Prepared and reviewed engineering plans, specifications, project schedules, designs, circuit diagrams, and estimates for construction and maintenance of transmission and distribution projects.• Prepare and reviewed of complete project for MV/LV distribution networks installation of power transformers, Cables laying and panels commission and Execute.• Planned and estimated costs on projects. • Provide technical support for system operation and maintenance.• Maintained effective working relationships with field crew, contractors, vendors, outside agencies, the public and city staff members.
Jul 2004 - Jul 2012
2 education records
Muhammad Moeed education
Bachelor Of Technology (B.Tech.) Honors Attested By Saudi Calture & Embassy, Electrical Engineering, A+
Indus Instute Of Higher Education Pakistan
Tsc, Electrical And Electronics Engineering, A
Msts
FAQ
Frequently asked questions about Muhammad Moeed
Quick answers generated from the profile data available on this page.
What company does Muhammad Moeed work for?
Muhammad Moeed works for Grace Plus Contracting Company.
What is Muhammad Moeed's role at Grace Plus Contracting Company?
Muhammad Moeed is listed as Testing Engineer Electrical at Grace Plus Contracting Company.
Where is Muhammad Moeed based?
Muhammad Moeed is based in Dammam, Eastern, Saudi Arabia while working with Grace Plus Contracting Company.
What companies has Muhammad Moeed worked for?
Muhammad Moeed has worked for Grace Plus Contracting Company, Grace Place Contracting Company, Novatex Limited - Official Page, Al-Gihaz Energy Services Gesco., and Pakistan Atomic Energy Commission.
How can I contact Muhammad Moeed?
You can use AeroLeads to view verified contact signals for Muhammad Moeed at Grace Plus Contracting Company, including work email, phone, and LinkedIn data when available.
What schools did Muhammad Moeed attend?
Muhammad Moeed holds Bachelor Of Technology (B.Tech.) Honors Attested By Saudi Calture & Embassy, Electrical Engineering, A+ from Indus Instute Of Higher Education Pakistan.
Find 750M verified contacts
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trialPeople with similar names
Check these profiles if this is not the Muhammad Moeed you were looking for.
View similar profiles
