Lead all electrical systems management and calibration activities, ensuring equipment safety, reliability, and compliance with regulatory standards. Oversee electrical installations, troubleshooting, and maintenance, while optimizing calibration processes to enhance operational efficiency. Collaborate with cross-functional teams to drive innovation and continuous improvement in electrical systems and performance across the site.

Ensure compliance with local regulations, GSK standards, and EHS policies while driving continuous improvement in safety and environmental sustainability across the site. Implement comprehensive EHS training programs and risk management systems to build expertise and foster a strong safety culture at all levels. Monitor key sustainability metrics, such as waste reduction and water conservation, and provide input in meetings to align with corporate EHS goals. Oversee audits, reporting, and… Show more Ensure compliance with local regulations, GSK standards, and EHS policies while driving continuous improvement in safety and environmental sustainability across the site. Implement comprehensive EHS training programs and risk management systems to build expertise and foster a strong safety culture at all levels. Monitor key sustainability metrics, such as waste reduction and water conservation, and provide input in meetings to align with corporate EHS goals. Oversee audits, reporting, and maintain positive relationships with stakeholders to ensure successful EHS goal achievement and regulatory adherence. Show less

Leading Site Electrical O&M, Maintenance Management System (CMMS) and EHS, Quality &Engineering Compliances. 𝙆𝙚𝙮 𝙧𝙚𝙨𝙥𝙤𝙣𝙨𝙞𝙗𝙞𝙡𝙞𝙩𝙞𝙚𝙨 𝙄𝙣𝙘𝙡𝙪𝙙𝙚:✓ To supervise the electrical maintenance activities along with maintaining the plant CMMS system. This includes smooth operations w.r.t to site Electrical system, preventive & corrective maintenance, major overhauling, maintenance plan reviews and PM Schedules formalization.✓ Analyzing root cause… Show more Leading Site Electrical O&M, Maintenance Management System (CMMS) and EHS, Quality &Engineering Compliances. 𝙆𝙚𝙮 𝙧𝙚𝙨𝙥𝙤𝙣𝙨𝙞𝙗𝙞𝙡𝙞𝙩𝙞𝙚𝙨 𝙄𝙣𝙘𝙡𝙪𝙙𝙚:✓ To supervise the electrical maintenance activities along with maintaining the plant CMMS system. This includes smooth operations w.r.t to site Electrical system, preventive & corrective maintenance, major overhauling, maintenance plan reviews and PM Schedules formalization.✓ Analyzing root cause of failures through why-why and fishbone diagram subsequently suggesting actions for prevention of their re-occurrence.✓ To monitor and ensure compliance with the relevant Engineering, GSK and regulatory requirements. ✓ Ensure that requirements of TP-13 are fulfilled in the concerned area.✓ Planning, Formalization & completion of EHS & Engineering Alerts.✓ To Identify & contribute in cost saving Projects for Operational Excellence.✓ Carry out CAPEX projects as per the fiscal year plan.✓ Ensure that all engineering activities are undertaken in a manner consistent with GSK policies and procedures.✓ Ensure continuous improvement (CI) in all work processes.✓ Lead GMP meetings for quality compliance and continuous improvement.✓ Manage the department L1 Audit/Management Monitoring program.✓ Coordinate audit related activities and gap analysis to ensure all external and internal audit activities of the department are in compliance with GQP, GQMP, GES and other site policies, procedures and operating instructions.✓ Drive continuous improvement across departments using GPS and operational excellence principles.✓ Ensure compliance with Global GSK policies and procedures comprising of GMP, ETCM, TPs, BCP, EHS, GQP and QMS policies.✓ Ensure CMMS is in compliance with GQP 4010, GES 103 and GES 501.✓ Ensure adequate selection, training and development of staff to achieve Maximum potential to meet business objective.✓ Be a role model on Leadership essential behaviors. Show less

To supervise the electrical maintenance activities along with maintaining the plant CMMS system.This includes smooth operations w.r.t to site Electrical system, employee relations, training anddevelopment, maintenance plan reviews, asset creation and other relevant work.This requires close inter and intra communication with all sites relevant stakeholders for smooth andefficient execution of the required roles.𝙆𝙚𝙮 𝙧𝙚𝙨𝙥𝙤𝙣𝙨𝙞𝙗𝙞𝙡𝙞𝙩𝙞𝙚𝙨… Show more To supervise the electrical maintenance activities along with maintaining the plant CMMS system.This includes smooth operations w.r.t to site Electrical system, employee relations, training anddevelopment, maintenance plan reviews, asset creation and other relevant work.This requires close inter and intra communication with all sites relevant stakeholders for smooth andefficient execution of the required roles.𝙆𝙚𝙮 𝙧𝙚𝙨𝙥𝙤𝙣𝙨𝙞𝙗𝙞𝙡𝙞𝙩𝙞𝙚𝙨 𝙄𝙣𝙘𝙡𝙪𝙙𝙚:𝑺𝒕𝒓𝒂𝒕𝒆𝒈𝒊𝒄 𝑷𝒍𝒂𝒏𝒏𝒊𝒏𝒈:1. To Identify & contribute in cost saving Projects for Operational Excellence.2. Ensure that requirements of TP-13 are fulfilled in the concerned area.3. Communicate with relevant stakeholders for effective implementation of CMMS which includes butnot limited to maintenance plan reviews, asset creation & ensuring the timely closure ofall PM & CM work orders.4. Carry out CAPEX projects as per the fiscal year plan.𝑶𝒑𝒆𝒓𝒂𝒕𝒊𝒐𝒏𝒂𝒍 𝑩𝒖𝒔𝒊𝒏𝒆𝒔𝒔:1. Ensure that all engineering activities are undertaken in a manner consistent with GSK policies and procedures.2. Ensure continuous improvement (CI) in all work processes.3. Monitor Engineering related Risks Assessment procedures as well as Self Inspections.𝑪𝒐𝒎𝒑𝒍𝒊𝒂𝒏𝒄𝒆 𝒂𝒏𝒅 𝑷𝒓𝒐𝒄𝒆𝒅𝒖𝒓𝒂𝒍 𝑰𝒎𝒑𝒍𝒆𝒎𝒆𝒏𝒕𝒂𝒕𝒊𝒐𝒏𝒔:1. Develop and implement systems, policies, and procedure so that engineering activities are operatedsafely and comply with Group and Local regulatory requirements.2. Providing Engineering support for preparation of Site Quality plans periodically and ensurecompliance and continuous Quality improvement.3. Ensure compliance with Global GSK policies and procedures comprising of GMP, ETCM, TPs,BCP, EHS, GQP and QMS policies.𝑷𝒆𝒐𝒑𝒍𝒆 𝑴𝒂𝒏𝒂𝒈𝒆𝒎𝒆𝒏𝒕 & 𝑫𝒆𝒗𝒆𝒍𝒐𝒑𝒎𝒆𝒏𝒕:1. Ensure adequate selection, training and development of staff to achieve their Maximum potential tomeet business objective.2. Be a role model on Leadership essential behaviors. Show less

Leading the Electrical department of site.Site Electrical Base Includes:1). HT Panels2). Distribution Transformers 3). LT Panels4). Diesel Generators5). VFDs & Power Factor Controllers6). Hazardous Area EquipmentMajor responsibilities Include:1). Ensure that the electrical system of site complies with GSK Global Engineering Standards2). To supervise routine corrective & preventive maintenance activities3). Perform RCAs of the recurrent failures… Show more Leading the Electrical department of site.Site Electrical Base Includes:1). HT Panels2). Distribution Transformers 3). LT Panels4). Diesel Generators5). VFDs & Power Factor Controllers6). Hazardous Area EquipmentMajor responsibilities Include:1). Ensure that the electrical system of site complies with GSK Global Engineering Standards2). To supervise routine corrective & preventive maintenance activities3). Perform RCAs of the recurrent failures through Fish Bone or Why-Why Analysis and suggest relevant measures to prevent re-occurrence.4). To identify and contribute to Energy Savings project.5). To prepare in accordance with TP-13 requirements. Show less

Enent is a clean-tech electronics startup focusing to design innovative products that reduce energy waste. Our core product, Intellica, 3 phase Automatic Load Balancer Device is based on load balancing technology that has been patented and has received massive appraisal and recognition. The technology enables consumers to reduce the energy that gets wasted due to an imbalance in 3 phase loads. Our team has a vision of working towards developing feasible solutions to some of the most… Show more Enent is a clean-tech electronics startup focusing to design innovative products that reduce energy waste. Our core product, Intellica, 3 phase Automatic Load Balancer Device is based on load balancing technology that has been patented and has received massive appraisal and recognition. The technology enables consumers to reduce the energy that gets wasted due to an imbalance in 3 phase loads. Our team has a vision of working towards developing feasible solutions to some of the most crippling problems of our economy in the energy sector with an affordable cost for our consumers. Our mission is to continue developing cost-effective technological products and solutions to drive a positive impact in Pakistan and across the world.By balancing the loads connected to 3 phase in a house, Intellica saves around 20-25% of electricity bills for the consumer. Installation Intellica in 1000 homes can results in a reduction of 18,000 ton of CO2 emission every year rendering a healthier planet, savings of $0.5 million in electricity bills yearly and the saved energy can be used to power additional 200 homes. It would have a massive impact on the efficiency of the grid. Moreover, the cost of the device is significantly cheap that is $300 and can be recovered within 6-8 months of savings.Some of the highlights of ENENT's achievements till date are:✓ Winner of Asia Pacific Low Carbon Lifestyles challenge - 2020 organized by UNEP. ✓ Runner up in Shell Top 10 innovators Program – 2020.✓ Runner up in “6th Kazan OIC Youth Entrepreneurship Forum”.✓ Winner of Impact Link: Social Enterprise Challenge 2020. ✓ Declared as a Top 30 Best Innovative Startups in Energy Category in Technology Innovation Pioneers Summit (TIP Summit – 2020). Show less

Supervising a team of 07 baseline engineers, 10 skilled technicians and leading the Electrical Maintenance activities of the assigned area. Plant Base includes: ✔4 x Gas Turbines, GE LM-6000 PC SPRINT NDW Aero-derivative (48MW, 11kV) ✔2 x Steam Turbines, Thermodyn 8-11 MC9 (30MW, 11kV) ✔4 x Chillers, McQuay WSC126MBHN09/E4212-BE/C3612 ✔4 x GE Energy FS704 Natural Gas Booster Compressors(2.2barg - 40barg) ✔Gas Insulated Switch Gear - GIS (245kV, 3150A, Make :… Show more Supervising a team of 07 baseline engineers, 10 skilled technicians and leading the Electrical Maintenance activities of the assigned area. Plant Base includes: ✔4 x Gas Turbines, GE LM-6000 PC SPRINT NDW Aero-derivative (48MW, 11kV) ✔2 x Steam Turbines, Thermodyn 8-11 MC9 (30MW, 11kV) ✔4 x Chillers, McQuay WSC126MBHN09/E4212-BE/C3612 ✔4 x GE Energy FS704 Natural Gas Booster Compressors(2.2barg - 40barg) ✔Gas Insulated Switch Gear - GIS (245kV, 3150A, Make : Siemens) ✔4 x Power Transformers (115MVA, 220kV/11kV & 40MVA, 220kV/11kV) ✔4 x Auxillary Transformers (18.5MVA,11kV/6.6kV & 5MVA,11kV/6.6kV) ✔6 x Service Transformers (3.2MVA, 6.6kV/0.4kV & 2MVA, 6.6kV/0.4kV) My core responsibilities include Ensuring all the activities are carried out in conformance with HSE&S standards & policies. Supervision of routine preventive and corrective maintenance activities in the Electrical section. Analyzing the root cause of failures through why-why and fishbone diagram subsequently suggesting actions for the prevention of their re-occurrence. Examining the chain of command and devise ideas for continuous system improvement, thereby reducing operational inefficiencies. Technical assessment & verification of RFQ’s and ensuring on-time spare parts availability. Show less

As a trainee engineer, I explored diversified electrical equipment on core plant (Oxidation, Purification & Utilities) as well as had rigorous training on Co-generation plant.MAJOR PROJECTS:✔ Mega drive LCI (Soft Starter) control up-gradation for 20.5MW Synchronous Motor. ✔ Up-gradation of the motor control panel (responsible for supervision, protection & control of 20.5MW synchronous motor) against obsolescence. Business-critical projects involving a CAPEX worth PKR 150Mn… Show more As a trainee engineer, I explored diversified electrical equipment on core plant (Oxidation, Purification & Utilities) as well as had rigorous training on Co-generation plant.MAJOR PROJECTS:✔ Mega drive LCI (Soft Starter) control up-gradation for 20.5MW Synchronous Motor. ✔ Up-gradation of the motor control panel (responsible for supervision, protection & control of 20.5MW synchronous motor) against obsolescence. Business-critical projects involving a CAPEX worth PKR 150Mn and PKR 50Mn respectively. Major responsibilities include:►Devised a detailed timeline from project initiation to final commissioning. ► Attended kick-off meetings and prepared meeting minutes. ► Thorough analysis of technical specification documents (circuit diagrams, block diagram, layout drawings & signaling list) with the OEM.MAJOR ASSIGNMENTS:►Spearheaded Annual Inspection of GE LM-6000PD Gas Turbine Alternator (11kV, 63.5MVA). ►Successfully led the Protection Relays Testing (M-3425A Generator Protection Relay, MiCOM, GEC Alstom & MPC-2000 ) & L3 Inspection of 20.5MW Synchronous motor in Major Overhaul and Short Shutdown.►Executed L3 Inspection of 20.5 MW Process Air Compressor Synchronous Motor with OEM.►Upgraded the Eurotherm Excitation Unit firmware of 20.5MW motor against obsolescence with OEM support, thus resolved the chronic issue of motor’s tripping on Converter Fault.►Administered the major modification involving the designing, installation & parameterization of 90kW SIMOVERT MASTER DRIVE SIEMENS VSD.►Investigated and evaluated tripping of 20.5MW synchronous motor on under-voltage & under excitation.►Increased the Efficiency of Plant UPS's to 18% by operating them on Advanced Eco Mode, thereby resulting in savings of PKR 3.5 Million.►Diagnosed the root cause of insulation failures on 3.3kV MV drives. Show less

Worked on Unmanned Aerial Vehicle Tracker which is an embedded solution to monitors and track UAV's .Done processor programming on core i7 and developed extensive GUI.The processor takes real time data from GPS and finds excact Azimuth and Elevation angles which then give command to AC Servo drives to move Tracker to required position.Used peripherals like UART,Interrupts and timer to develop the setup.

Worked on Metgraph, an ARM Cortex M4 based embedded solution for Pakistan Navy for acquisition of data from maritime sensors and calculation of true wind parameters.All the programming and controlling is done on Tm4c123_Cortex M4 microcontroller.

Hands on experience on various power and electronics based projects. Also done programming on Atmel Series AVR microcontrollers.Worked on various peripherals like ADC,UART,Timers,Interrupts and PWM for controlling and monitoring.

Worked on Griffo_ PG, Griffo_7 radars which is an Italian Radar installed on F-7, learned how to do reverse engineering. Design schematic of floating deck of radar on proteus