Muhammad Sardar Email & Phone Number

Rahim Yar Khan District, Punjab, Pakistan

Employer (Contractor): Al Jawahir Techincal Overseas Contracting LLC-FZ/ TAPL)Consultant: Ashfaq Associates Pvt Ltd/ HDPClient: DOPA, UAEProjects: 10 Buildings Villa Complex with Finishing Works & Infrastructure WorksConstruction of New Cardiac Center, Sheikh Zayed Medical ComplexJob Description:Strong study of drawings, specifications and project plan.Preparation of inspection and test plan (ITP), Method statement (MS), job safety analysis/job hazard analysis (JSA/JHA), material approval request (MAR), request for inspection and testing (RFI & RI & T) and check lists. Taking approval of documents.Conducting daily inspection plan according to submitted RFI’s and ITP.Supervision of field density test (FDT), slump test, cube casting/testing of concrete/grout cube testing for compressive strength, steel testing.Train the supervisors and site team morally to achieve targets and to build strong team.Close monitoring of major activities (Layout, excavation, shuttering works, rebar works, concreting, embedded items/anchor bolts, waterproofing, grouting, backfilling)Coordination with other discipline in-charge regarding the sequence and interface of activities.Coordination with sub-contractors, monitoring the progress and compliance of schedule, quality, safety and project specifications.Preparation of technical queries at site, discussion with client and proposals of technical issues.Compliance of project plan, expedite the progress to enhance the efficiency and productivity.Day to day feedback to management regarding quality plan and discussion on technical matters.Attend weekly/monthly meetings with consultant and client.Arrange Weekly quality walks at sitePreparation of Dossier and closing of documents as per procedure.Getting the lesson learn from project, implementation of good practices and overcome the shortcomings.

Doha, Qatar

Company: Descon Engineering Qatar LLCClient: QAPCO, MIC QatarEPC Contractor: CTCI CorporationProjects: EP1 Machine Replacement Project, QAPCO, Qatar (Major Scope: Earth works, Concrete Foundation, U/G Trenches Manhole/Valve Box, Concrete Paving, Grouting Steel Structure, Painting works, Block Works)QAPCO SD/TA-2021 (Major Scope: C2/C3 Compressor & Turbine Concrete Demolition & New Epoxy Grouting, Support Foundations & Grouting)Qatar Petrolium Oil Refinary TA/SD-2022 (Major Scope: Demolition of Old Tower Wall for Inlet/Outlet Pipe Replacement, Replacement of Packing & Panel, Replacement of Steel Structure Supports, Demolition of Sulpher Pit Slab & Walls for Replacement of Pipes), Demolition of Grouting of Boiler/Reactor and Pouring of New Grouting) Job Description:Strong study of drawings, specifications and project plan.Calculation of material, tool and equipment to be used at site.Preparation of bar bending schedule and BOQ.Preparation of purchase demand (PR) for material and tools. Complete follow up for the availability of all resourcesPlan the site activities based on Level-4 plan.Mobilize the resources (Manpower, material, tools, equipment) and allocation at site as per planDetailed discussion and coordination with site supervisors for resources allocations and commencement of work. Close monitoring of major activities (Layout, excavation, shuttering works, rebar works, concreting, embedded items/anchor bolts, waterproofing, grouting, backfilling)Compliance of project plan, expedite the progress to enhance the efficiency and productivity.Day to day feedback to management regarding daily progress, constraints and resources availability.Preparation of inspection and test plan (ITP), Method statement (MS), job safety analysis/job hazard analysis (JSA/JHA), material approval request (MAR), request for inspection and testing (RFI & RIT) and check lists.

Rawalpindi, Punjab, Pakistan

Client: Punjab Safe Cities Authorities (PSCA), Punjab.Project: Construction of Safe City Building (Major Scope: 3 Storey Frame Structure Building & Finishing WorksCPO Office, Rawalpindi (Major Scope: 3 Storey Frame Structure Building & Finishing Works)Job Description: Strong study and understanding of drawings, project specification, contracts, Project Quality Plan (PQP), BOQ and other related documents Monitoring the quality of work as per Specifications, Drawings & PQP. Sign & verify the submittals, RFI’s, Check Requests. Review To assist the Resident Engineer in specified duties. Coordination with Resident Engineer and Contractor Regarding Work Progress & other Technical Issues. Verification and approval of Contractor’s Bar Bending Schedule & IPC’s and other submittals. Review shop drawings, site technical issues, discuss with client and getting approval. Issue site instruction and other correspondence according to work schedule. Assigning the tasks to subordinate consultant staff. Inspection and witness of major activities and hold points. Preparation of daily and monthly progress reports and presentation Compliance of work schedule and sequence. To attend the Progress review meetings with Contractor & Client. Coordination with client counterpart. Maintaining the office record through document controller Preparation of punch lists and closing of points with quality. Review and verification dossier submitted by contractor.

Multan, Punjab, Pakistan

Designation: Senior Engineer CivilPeriod: 3-1/2 Year (January-2014 to April-2017)Company (Consultant): AREAA Construction (Pvt) Ltd.Clinet: Coca Cola Beverages Pakistan Limited (CCBPL)EPC Contractor: ORA Insaat (Pvt) Ltd. & HRL JV.Project: Construction of Coca Cola Green Field Project, Multan (Major Scope: Earth works, Concrete Foundation, Pipe Sleepers, U/G Trenches Manhole/Valve Box, Tank Foundations Concrete Paving, Grouting Steel Structure, WWTP, Utility Buildings, Electrical & Control Buildings, Offices, Masjid & Canteen BuildingsJob Description: Strong study of drawings and project specifications.  Preparation of inspection and test plan (ITP), Method statement (MS), material approval request (MAR), request for inspection and testing (RFI & RIT) and check lists Taking the approval of above mentioned documents from client. Conducting daily inspection plan according to submitted RFI’s and ITP. Maintaining the RFI log, documents and files. Conducting field density test (FDT), slump test, cube casting, testing of concrete/grout cube testing for compressive strength, brick test, aggregate test, cement and sand test according to project specification and engineering standards.. Preparation of daily and monthly progress report. Attend the progress review meeting within company, contractor and client. Review, verification and approval of bar bending schedule for construction activity. Close coordination with contractor and client. Compliance of project plan and review daily progress. Provision of approved drawings and documents to contractor. Preparation of technical queries at site, discussion with contractor & client, proposals of technical issues and taking the approval from client. Verification of contractor’s invoice Preparation of dossier. Compliance of quality and HSE policy.

Rlic, Qatar

Designation: Engineer CivilPeriod: 3 Year (January-2011 to December-2013)Company: Descon Engineering Qatar LLCClinet: RAS GASEPC Contractor: Japan Gas Corporation (JGC)Project: Barzan Onshore Gas Project, RLIC Qatar (Major Scope: Earth works, Pipe Racks, Pipe Sleepers, Dike Wall, Tank Foundation, Ducts, Concrete Pits, Culverts, U/G Trenches Manhole/Valve Box, U-ditch, V-ditch Concrete Paving, Grouting, Steel Structure, Cooling Tower, Slug Catcher, Flare Foundation, Concrete Frame Structure Work, Block works, Road Works)Job Description: Strong study of drawings, site related(MS, ITP) documents, specifications and procedures Preparation and implementation of level-4 plan Complete monitoring & supervision of site activities. Calculation of tools and material required at site. Preparation of bar bending schedule, BOQ and as As-build drawings. Preparation of purchase demand (PR), coordination with supplier/vendor and follow for procurement of material. Ensure the availability of material, tools and equipment at site and as per plan Coordination with sub-contractors, monitoring the progress and compliance of schedule, quality, safety and project specifications. Preparation of technical queries at site, discussion with client and proposals of technical issues. Compliance of project plan, expedite the progress to enhance the efficiency and productivity. Close monitoring of major activities at site. Daily meeting with construction manager regarding progress review, resource management and constraints facing on site Close coordination with supervisors, site worker and develop team work.  Preparation of material approval request (MAR), Method statement (MS) Taking the approval of above mentioned documents from client. Conducting daily inspection plan according to submitted RFI’s and ITP. Conducting field density test (FDT), slump test, cube casting, testing of concrete/grout cube testing for compressive strength

Dubai, United Arab Emirates

Designation: Site EngineerPeriod: 1-1/2 Year (June-2009 to December-2010)Company: Asian Building Contracting LLC, UAEClinet: Concept Flexible Packaging LLC/ Eppinco Plastic Pipes Industry LLCProject: Construction of Packaging Plant Foundations, Warehouse, Sheds, Offices, Residences (Major Scope: Earth works, Concrete Foundation, Ducts, U/G Trenches Manhole/Valve Box, Concrete Paving, Grouting Steel Structure, Building Concrete Frame Structure Work, Block works, Painting works)Job Description: Supervision and monitoring of site activities. Perform daily site discussion before the start of work for the awareness of safety system, risk hazards at site and assure the safety of workers keeping the safe work environment. Compliance of quality assurance at site. Conduct inspection of various site activities with client. Perform quality tests at site and laboratory based testing. Provision of drawings, necessary documents to site supervisors Calculation of material, raise demand for procurement and follow up for the timely availability of material at site. Coordination with vendors and suppliers. Collecting material data, prepare approval request and getting approval from client. Preparation of bar bending schedule, getting approval from client and strict the compliance of schedule at site. Drawing study and review, maintain the revised drawings. Preparation of as build drawing and getting approval from client. Preparation of technical queries, discuss with client, propose the solution and getting approval from client. Preparation of interim payment certificate (IPC), verification of quantities at site. Preparation of construction plan. Prepare daily, weekly and monthly progress reports. Coordinate with project manager and client regarding site matters. Attend progress review meeting and presentation to client.