• Leading construction management engineers’ team for construction of Villa building works, infrastructure (wet utilities), potable water, wastewater and drainage system, Irrigation System, HVAC system and Fire Fighting system.• Review material technical submittals.• Coordinating with Client and Supervising Snag and De-snag lists prior to villa handing over to client.

King Saud University Hospital Rehabilitation Center, Riyadh• Supervising MEP works, including design drawings, installation drawings, As Built, FIR, MIR, Change orders etc• Monitoring HVAC system, installation upto Testing and commissioning works along with TAB activities.• Inspection firefighting system (Hydrants and network, Sprinklers, Water Mist, Smoke detectors, hose reels etc.)• Ensuring for proper installation of RO plants for dialyses and drinking water.• Supervising medical gas and vacuum system installation work

SWRO and BWRO - Desalination Water Plant 238000 m3/day (8 Plants on Red Sea) with GRP Pipes, fittings and equipment etc• Monitoring Intake and outfall GRP pipe lines fit up and jointing at offshore and installation work onshore.• Intake station preparation their pumps installation on foundation, their suction and discharge side.• Gravity filters partition wall, their bottom and partition sleeves, suction and discharge puddle flanges, supply and discharge GRP piping installation as per drawings and SWCC standards and their inspection.• GRP Piping for Storage tanks of Filtrate, Back wash, Calcite, permeate water, product and Sludge tank along with Firefighting tank.• SWRO and BWRO unit’s installation along with their complete accessories.• High pressure, booster and intermediate pumps installation, their alignment, inspection along with Sulzer.• Service water pump, potable water pump, CO2 carrier water pumps, Flushing pumps, Backwash pumps, Cartridge filters and their pumps, Air scour blowers, Screw air compressors and dryer with tanks installation.• Overhead cranes and mono rails installation inspection work• Chemical dosing and CIP system installation work.• Neutralization system installation work.• To ensure compliance of all Mechanical RFP requirements. • To ensures completion of project documents. • To oversee the construction & commissioning of project from start to finish. • Communicate with the contractor, and other related firms or establishments effectively, for completing various phases of the project at scheduled times.

SHAROURAH (PM-193), JAZAN AND ASEER ( PM194) and Power Plants – Sharourah, Abha & Jazan (Southern Region)CONVERSION CRUDE OIL OPERATION FROM DISTILLATE OIL OF EXISTING GAS TURBINES UNITS GE MS5001PA (Sharourah PP) GE MS7001EA AT JAZAN & ASEER POWER PLANTThis Scope of Work is on LSTK (Lump Sum Turn Key) basis and the Technical Specifications have been developed to establish the criteria on which the engineering design, its review, procurement, quality and project management, manufacturing, inspection & acceptance, supply and transportation of materials and equipment; installation, erection and construction, site inspection & acceptance, testing and commissioning; on-load testing; start-up, and reliability testing, and putting into service.• The objective of the PROJECT is to Convert Sharourah PP, Jazan Power Plant and Aseer Power Plant existing GE MS7001EA Gas Turbines Units to operate on Light Arabian Crude Oil as Main operating fuel from Distillate fuel oil, however distillate fuel oil operation will remain for startup and shutdown. • Modification work for Fuel unloading Stations, • Modification work of existing Fuel Oil Tanks and piping arrangement system• Installation work for Fuel Additive Bulk, transfer & Forwarding pumps, Supply pipeline system etc.• Installation work of main equipment like Crude Oil Transfer pump (COTP), Crude forwarding pumps, Crude transfer pumps, crude forwarding heaters, Fuel selection skids.• Compressor and turbine water wash skids for crude oil operation.• Taking care of HVAC ducting fabrication, installation and erection along with PACU installation.• Installation of Fire-Fighting systems including Hydrants, Water deluge and foam system, water Sprinklers system, installation of Fire Alarm & FM200 Fire Suppression systems.• Installation of Plumbing system, Smoke purging fans, Supply & Ventilation fans, pumps etc.• Monitoring project BOQ, Design approval, equipment selection, procurement and balance work to complete.

• SITE and Client (Saudi Electric Company – SEC) day-to-day issues coordination.• Monitoring BOQ of the project and balance work to complete.• Taking care of HVAC ducting fabrication, installation and erection along with Package Air Conditioning Units (PACU) selection and installation.• Expertise in installation of Fire-Fighting systems including Fire Hydrants, Foam, Sprinklers, Alarm & Suppression systems.• Expertise in installation of Plumbing system, smoke purging fans, pumps and ventilation fans etc.• Fire Pumps (UL Listed/ FM Approved / KSA) Portable, mounted on trolley and complete pump stations (diesel / electric / Jockey). • Expertise in Fire brigade materials: Extinguishers, branch-pipes, nozzles, flexible hoses, motor-pumps, etc.• Personal protective equipment (suits, masks, breathing apparatus, etc.)• Supervise the works of relevant mechanical (HVAC / FF / Utilities) Contractors to insure quality and that constructions/installations are in accordance with drawings, specifications and local regulations.• Follow quality assurance procedures for review and inspection of installations throughout the project period.• Attend coordination meetings, anticipate potential problem areas, and solve them before they occur.• Assist in reviewing method statements • Prepare job site instructions to facilitate the contractor's progress.• Review and approve installations and constructions • Inspect deliveries/installed/constructed work to ensure that it is in accordance with the shop drawings and the specifications • Issue field observation report and none compliance reports (NCR).• Witness testing and commissioning of various plant and systems• Snag defects / outstanding minor work for the Contractor to action and follow up on their progress• Review 'As Built Drawings' to ensure correctness, completeness and that they are in-line with the specifications.

PP10 - Combined Cycle Power Plant• SITE and client day-to-day issues coordination• Assisting Sr construction manager in day-to-day issues.• Monitoring BOQ of the project and balance work to complete.• Personnel and equipment deployment at SITE to avoid delay in operation and idle time. • Looking after SITE daily fabrication and erection progress of piping, structure, and equipment. • Taking care of line checks and PUNCH LIST along with QC for hydrotest preparation.• Actively participating in chemical cleaning activities so that commissioning team can start their activities.• Working as catalyst in commissioning activities to make ready the system for steam blow.

• To organize/manage all technical activities of factory.• To co-ordinate production, non-production factory staff for technical services i.e. planning, providing and commissioning.• To provide repairs and maintenance facilities for production, non-production facilities.• To plan for future installation in co-ordination with production department.• To train the workshop technical staff, crew in relation to their job.• To ensure maintenance and inspection of boiler, electrical installation and correspondence.• To manage electric section and engineering stores.• Preparation of capital expenditure budget/estimates/Plan of factory.• To provide facilities for over hauling of machines and maintenance of factory vehicles.• To manage equipment/machinery/ movement/Energy conservation programs etc.• To maintain/provide environmental protection program/facilities inside/outside the factory.• To plan, provide any semi-automation, automation system inside production floor.

• Responsible for the effective implementation of Total Quality Management system and Production.• Planning, Scheduling of production.• Planning, and managing direct and indirect materials and consumables.• Expertise in personnel deputation and handling over 1400 strength.• Hands on experience in piping erection, fabrication and installation work.• Experience in installation of rotary and stationary equipment.• Plant updates and innovations as per requirement and demand.• Water treatment plant erection and fabrication experience.• MS structures and Silos, Vessels erection and fabrication work.• Power house civil, electrical and mechanical installation work experience.• Installation of washers, fillers, Un-caser, Case packer, Chain and roller conveyors.• Installation experience of Un scrambler.

• To plan, manage and ensure production according to the targets within quality standards.• Ensure implementation of machine’s maintenance schedule.• Ensure execution of machine’s operating procedures.• Coordinate with the related production sections of the factory.• Coordinate with maintenance staff for preventive maintenance.• Make necessary arrangements i.e. manpower and material for continuation of production.

• Fully understand Contracts, Budget, Cost Centers, Expense Heads, and Work Breakdown Structure.• Preparing Analytical and Financial Plan of the project.• To monitor site facilities establishment and operating cost against budget.• Monitoring usage of Direct Materials, Direct Consumable on daily basis and material wastages.• Monitoring deployment of direct and indirect manpower, Equipment and plant within the budget• Preparing quarterly revenue / Cost forecast.• Preparing cost to complete and cost at completion by evaluating balance work, inventory and work in progress on monthly basis.• Estimating cost impact whenever if there is change in scope of work or plan.• Additional In-charge of Painting Shop.

• In-charge Utilities.• To look after Boiler Maintenance and scheduling its preventive maintenance.• Hands on experience in installation of RO plant.• Fully understand Screw and Piston Compressors in-house maintenance and complete over hauling.• Experienced in installation of Cargo and Passenger lifts from shaft to its operation.• Expertise in installation, maintenance of conveying systems likes Belt, Screw, Pneumatic and Bucket Elevator.• To prepare Annual Preventive Maintenance of Machine and its implementation.• Innovating new ideas and projects to minimize downtime.• Designing new Projects for the enhancement of production.• Cost Evaluation of existing and proposed projects.• Monitoring new projects and its scheduling, planning and execution. • Ensuring to follow the safety precautions and Environmental, Occupational Health and Safety (EOHS).

• Checking cooling towers efficiencies, their water level in sump tank, water pH.• Caterpillar generators air filters inspection at the start of shift.• Taking generators, cooling towers and Plate Type Heat exchangers reading in respective shift.• Water re-charging to maintain its TDS.• Maintaining shift log hourly.