Muhammad Zeeshan Noor(Prov. Licensee(Eng) Apega, Pmp,Prince 2,Mba) Email & Phone Number

Calgary, Ab, Ca

Calgary, Alberta, Canada

•Conducted a comprehensive assessment of the existing fire protection system in parking P2, evaluating main components of wet and dry systems, determining that installing a new system was more feasible through a cost-benefit analysis. Designed and implemented a new fire protection system adhering to NFPA 13 and Alberta/Canada Building Codes, including dry systems and FM200 systems for areas with sensitive IT and electrical equipment, collaborating with subcontractors and SMEs to finalize… Show more •Conducted a comprehensive assessment of the existing fire protection system in parking P2, evaluating main components of wet and dry systems, determining that installing a new system was more feasible through a cost-benefit analysis. Designed and implemented a new fire protection system adhering to NFPA 13 and Alberta/Canada Building Codes, including dry systems and FM200 systems for areas with sensitive IT and electrical equipment, collaborating with subcontractors and SMEs to finalize budget, schedule, and risk management.•Redesigned cooling towers working at Calgary Airport to utilize cold weather for free cooling, adjusting louvers and optimizing the supply and return system to prevent icing and enhance efficiency. Analyzed existing designs, implemented improvements, and collaborated with contractors, achieving free cooling during cold weather, reducing energy consumption by 20%, improving cooling efficiency by 25%.• Developed and implemented a preventive maintenance plan for lift stations after conducting initial assessments, performing corrective maintenance, and designing a periodic maintenance schedule. Improved efficiency and reliability of lift stations by 30%, reduced downtime and emergency repairs by20%, and extended the lifespan of lift station equipment.•Upgraded fire protection equipment in buildings outside the main terminal, including airside and tenant buildings, by applying the same process used in lift stations. Evaluated existing equipment, designed upgraded systems compliant with NFPA 25 and building codes, and collaborated with contractors for installation, improving safety and ensuring compliance.•Optimized the Maximo (CMMS) system by updating missing assets in all major mechanical areas, including lift stations, mechanical rooms, lifts, escalators, moving walkways, and passenger bridges. Conducted a thorough review, identified missing assets, and updated Maximo with accurate information, resulting in improved asset management. Show less

Calgary, Alberta, Canada

• Designed and installed 20 charging stations for pallet jacks, ensuring compliance with CSA C22.1:18 and NFPA 70E, and improving operational efficiency by 25% with minimal disruption.• Planned and oversaw the installation of a new racking system, adhering to RMI ANSI MH16.1, increasing storage capacity by 30%, and enhancing loading/unloading efficiency by 20%.• Managed the installation of 2 new dock plate systems and a canopy system, following OSHA 1910 Subpart D standards, improving… Show more • Designed and installed 20 charging stations for pallet jacks, ensuring compliance with CSA C22.1:18 and NFPA 70E, and improving operational efficiency by 25% with minimal disruption.• Planned and oversaw the installation of a new racking system, adhering to RMI ANSI MH16.1, increasing storage capacity by 30%, and enhancing loading/unloading efficiency by 20%.• Managed the installation of 2 new dock plate systems and a canopy system, following OSHA 1910 Subpart D standards, improving loading/unloading efficiency by 25%, and ensuring safety.• Redesigned the preventive maintenance program for the conveyor belt system using Microsoft Project, reducing corrective maintenance costs by 20%, and decreasing system downtime by 30%.• Developed a new preventive maintenance schedule for MHE equipment, utilizing Microsoft Project for cost-benefit and root cause analysis, achieving a 25% reduction in maintenance costs, and a 20% decrease in equipment downtime.• Managed a team of 7 technical associates and 6 subcontractors. Show less

Calgary, Alberta, Canada

• Spearheaded installation of new shrink wrappers at Martin Brower Canada, reducing downtime and maintenance costs. Conducted cost-benefit analysis, designed improved layout, calculated power needs, and coordinated with operations to minimize disruptions. Hired contractors, developed project schedule, and achieved increased efficiency with a seamless handover to maintenance.• Replaced lead-acid batteries in 20 MHE units with lithium-ion, enhancing efficiency and reducing maintenance… Show more • Spearheaded installation of new shrink wrappers at Martin Brower Canada, reducing downtime and maintenance costs. Conducted cost-benefit analysis, designed improved layout, calculated power needs, and coordinated with operations to minimize disruptions. Hired contractors, developed project schedule, and achieved increased efficiency with a seamless handover to maintenance.• Replaced lead-acid batteries in 20 MHE units with lithium-ion, enhancing efficiency and reducing maintenance. Conducted cost-benefit analysis, secured a supplier with robust warranty, and managed training for battery replacement. Constructed five new charging stations and ensured a smooth transition.• Launched comprehensive maintenance program, conducting assessments and collaborating with teams and vendors. Developed an annual preventive maintenance schedule, improving equipment reliability and reducing downtime. Ensured optimal maintenance practices and fostered a culture of proactive care and operational excellence.• Led project of cooling coil replacement in Bun freezer, maintaining -40°C and coordinating with HVAC vendors. Managed planning, execution, and closeout, ensuring compliance with safety standards. Enhanced freezer efficiency and reliability, demonstrating ability to manage complex technical requirements. Show less

South Sudan

• Led the construction of a prefabricated residential camp for Ethiopian troops, featuring 20 units with 400 total beds, 20 washrooms, and comprehensive facilities including power generators, wastewater systems, and recreational areas. Managed design calculations for air conditioning and exhaust systems in tropical conditions. Coordinated resource allocation, issued RFPs, and ensured adherence to quality standards, completing the project on time and within budget.• Directed the installation… Show more • Led the construction of a prefabricated residential camp for Ethiopian troops, featuring 20 units with 400 total beds, 20 washrooms, and comprehensive facilities including power generators, wastewater systems, and recreational areas. Managed design calculations for air conditioning and exhaust systems in tropical conditions. Coordinated resource allocation, issued RFPs, and ensured adherence to quality standards, completing the project on time and within budget.• Directed the installation of 40 containerized wastewater systems across eight sectors, including soil testing, sump pit construction, and treated water storage design. Ensured compliance with international standards and UN regulations, coordinated with Euromec for system supply and spare parts, and obtained necessary approvals. Conducted staff training, drafted SOPs, and updated asset information in Galileo ERP, significantly improving waste management and sustainability.• Oversaw the construction and operational setup of a 10,000 sq ft engineering warehouse with a white arched plastic canopy. Implemented racking systems with barcodes and material handling equipment, including walkies and pallet jacks. Designed IT infrastructure and power needs, managed project schedules and resource allocation, and ensured quality control. Trained staff on equipment use and drafted SOPs, enhancing warehouse efficiency and operational capability. Show less

Qatar , Doha

• Worked on major projects in oil and gas sector and MEP Sector.• Spearheaded the design of oil and gas pump stations, adhering to stringent industry standards such as API 610 and ASME B31.3. Delivered designs within project deadlines, meeting client expectations and regulatory requirements.• I was entrusted with a pivotal role in ensuring the efficient operation of the metro station's mechanical systems. This project involved a unique challenge with a one-floor station and an expensive… Show more • Worked on major projects in oil and gas sector and MEP Sector.• Spearheaded the design of oil and gas pump stations, adhering to stringent industry standards such as API 610 and ASME B31.3. Delivered designs within project deadlines, meeting client expectations and regulatory requirements.• I was entrusted with a pivotal role in ensuring the efficient operation of the metro station's mechanical systems. This project involved a unique challenge with a one-floor station and an expensive five-level basement complex. My responsibilities were marked by results.• Proven LEED professional in different projects that are onshore and off-shore.• This encompassed intricate tasks, including piping, ducting, and equipment selection. My proficiency in AutoCAD, Revit, and Bentley software was instrumental in creating precise HVAC drawings, ensuring seamless integration with the station's architectural layout.• I played a pivotal role in converting designs into construction-ready drawings. I meticulously updated as-built drawings to align with on-site conditions, maintaining a 99% accuracy rate to preserve project integrity and got recognition for inspection related rework.• Secured project approvals through essential collaboration with local agencies like Qatar Civil Defense, achieving a 98% approval rate due to meticulous adherence to regulations and industry standards.• My commitment to Occupational Health and Safety (OHS) obligations led to an exemplary achievement of 100 accident-free days, safeguarding the well-being of all project stakeholders. Show less

Islamabad, Pakistan

• Complete Installation of HVAC, plumbing, firefighting, roofing, steel structure, concrete structure, grey structure and architectural work for different projects having area of more than 600,000 square feet for Government of Pakistan. These projects are named as NTC tower and Oil and Gas ministry tower.• Project management and administration by planning, scheduling, designing, procurement, approvals, execution, quality assurance and quality control, commissioning, closeout, trainings… Show more • Complete Installation of HVAC, plumbing, firefighting, roofing, steel structure, concrete structure, grey structure and architectural work for different projects having area of more than 600,000 square feet for Government of Pakistan. These projects are named as NTC tower and Oil and Gas ministry tower.• Project management and administration by planning, scheduling, designing, procurement, approvals, execution, quality assurance and quality control, commissioning, closeout, trainings, health and safety, transportation, contracts management and assets management.• Introduced high efficiency fire extinguishing system.• Developed capital and corporate budget forecasts for meeting deadlines and budget expenses.• Maintained close liaison with operations staff, JV partners and sub-contractors to accomplish MEP projects and commissioned them with 100 % efficiency in 1st attempt.• Maintained delivered projects and independently analyzed performance indicators. Show less

Riyadh, Saudi Arabia

Worked on the most prestigious project of Saudi Arabia named as King Abdullah Financial District. It worth more than 8 Billion USD.I was taking care of 2 numbers of buildings having covered area of more than 1 million square feet.Played vital role in designing of major portion of MEP by consulting national and international codes along with other local authorities to get approval for utilities.Collaborated with cross-functional teams, including architects, structural engineers, and… Show more Worked on the most prestigious project of Saudi Arabia named as King Abdullah Financial District. It worth more than 8 Billion USD.I was taking care of 2 numbers of buildings having covered area of more than 1 million square feet.Played vital role in designing of major portion of MEP by consulting national and international codes along with other local authorities to get approval for utilities.Collaborated with cross-functional teams, including architects, structural engineers, and specialists, to devise efficient mechanical designs and systems, encompassing HVAC, plumbing, fire protection, and more. Achieved a 15% reduction in project design time by implementing streamlined collaboration processes.Effectively coordinated with diverse stakeholders, including clients, contractors, suppliers, and consultants, ensuring the seamless integration of mechanical engineering aspects throughout construction. Contributed to a 10% increase in project efficiency through proactive communication and issue resolution.Produced comprehensive mechanical specifications, drawings, and documentation that consistently met regulatory requirements. Achieved a 99% compliance rate with industry codes and standards, minimizing project delays and rework.Demonstrated expertise in evaluating and selecting materials, equipment, and systems, optimizing cost-effectiveness, quality, efficiency, and sustainability. Realized a 12% cost reduction while maintaining project quality standards.Oversaw on-site mechanical construction activities, ensuring adherence to design specifications, safety protocols, and project timelines. Reduced incidents by 20% through proactive safety initiative.Implemented rigorous quality control procedures, conducting inspections and tests to guarantee the performance and quality of mechanical installations. Achieved a 95% acceptance rate, enhancing client satisfaction.Collaborated with cost engineers to accurately estimate and budget for mechanical aspects. Show less

Islamabad, Pakistan

Worked on one of the most prestigious projects in the city(Islamabad Stock exchange) with 18 floors above ground and 3 floors in basement for parking, covered area of building is around 560K sq. ft.Worked closely with consultant design team to reduce cost of minor changes in piping and ducting.Managed a better plan to transport heavy equipment as pumps ,AHUs ,FCUs to higher floors without damage by implementing all health and safety practices.Ordering of equipment for plantroom… Show more Worked on one of the most prestigious projects in the city(Islamabad Stock exchange) with 18 floors above ground and 3 floors in basement for parking, covered area of building is around 560K sq. ft.Worked closely with consultant design team to reduce cost of minor changes in piping and ducting.Managed a better plan to transport heavy equipment as pumps ,AHUs ,FCUs to higher floors without damage by implementing all health and safety practices.Ordering of equipment for plantroom according to documented specifications and completed approval process.Recommended high efficiency insulation for HVAC project which reduced the power usage by 3 percent.Designing changes were assisted incase of any construction flaws or civil structural changes.Helped contractual and billing team in finalizing related documents.• Increased efficiency of cooling tower by 20% by better layout management ,which was a great challenge.• Reduced cost of project by 3 percent by avoiding core cutting of main beam of concrete in plant room. Show less

Bsc Mechanical Engineering, Mechanical Engineering, 3.1 Cgpa

Mba, General Managment, Cgpa 3.4