Mohamad Naim Firdaus Roslan Email & Phone Number

Iskandar Puteri, Johore, Malaysia

FPI Inspector• Perform Fluorescent Penetrant Inspection (FPI) on aircraft engine components to determine material flaws and discontinuities.• carried out pre-FPI chemical etch process (Immersion) to remove the unwanted region through dissolution and mechanical agitation to open part surface in preparation for FPI process.• Perform daily checks on test equipment calibration in accordance with theapplicable process standard.• Performs inspection procedures following customers’ specifications. Inspects using various gages and tools.• Determines acceptability of product based on results of testing against the acceptance criteria specified in operations manual or other approved data and determines probable cause of defects. • Participate in team audits (NADCAP) and process reports for corrective actions.• Establish NDT documentation and process preparing for NADCAP, AS9100 and Customer audit.• Maintain good housekeeping practices on machines and in work area such as 6S, sort, label, and store tooling/equipment.QA Inspector• Perform in-process, incoming and final inspection (visual and dimensional) on aircraft engine components to identify nonconformances/defects.• Perform final verification check of completed jobs (inclusive of documentation) • Monitoring of calibration schedule of measuring instruments• Participate in continuous improvement projects. • Perform internal and external inspections, Interpret, measure, and evaluate results to ensure that the acceptance criteria of a specific code, standard, specifications, or document are met.• Maintain equipment assigned to ensure that it is in good working condition. (CMM, VMM, Profile Projector and various measuring Tools)• Write detailed inspection reports and maintain documentation of inspections. Provide writing technical reports of job conditions and defects happen in operations.• Follow all company policies and procedures and be a promoter of EHS, Quality and compliance on the shopfloor.

Seletar, North East Community Development Council, Singapore

Work as Multidiscipline Technician:• Main job role as NDT Inspector conducting Radiography Inspection (X-ray) NAS 410/EN4179 for examination of the blade aerofoil and line core.• Perform daily check and test for ensuring the line is in good condition, calibrated and safe for radiation work.• Maintain, check, and calibrate NDT testing equipment according to reference standards.• Setup and utilize Nondestructive test equipment.• Inspect all parts and welds according to SOP and QCWI. • Read drawings and record proper documentation of inspections.• Ensure radiation barricade is secured/visible and no unauthorized personnel around.• Fill out all paperwork correctly and legibly.• Operating GE Filmless Seifert X/Cube X-Ray Machine. - NEA R1 License No: R1/26416/0001 - TLD Badge No: 1024511• Operate Geometric Optical Measurement (GOM) machine for monitoring Fan blade for measuring: I. E-Max thickness II. Plane section shape. III. Blade form angles. Using software:I. Atos Professional V7.5 SR1II. Polyworks (Impas)12.1 version• Operating a Datum hole drilling machine: Matsuura V. Pluss-2000 Drill Datum Hole machine.I. This is a Datum transfer operation and involves the drilling of the root and tip datum holes.II. Drilling 2 datum holes and performing deburr process.III. Checked the diameter of both root and tip holes of every blade.IV. Follow the relevant SOP For fixture loading/unloading procedure.• Work in accordance with Technical Instruction (TI) and quality procedures. • Ensure all required overcheck have been completed, such as T-Card, Asset Care, or other documented systems.• Implement improvement initiatives, upkeeping of 5S activities and housekeeping standards.Carried out In-Process Inspection and manufacturing process on Aircraft Fan Blades for:I. Trent 900II. Trent 1000III. Trent XWB (97K & 84K)

Singapore

Performing FPI and RT (Assistant) inspections on aerospace components(Aircraft Engine):• Perform daily check. Ensure line in good condition and calibrated.• Maintain, check, and calibrate NDT testing equipment and reference standards• Set up and utilize Nondestructive test equipment.• Performing Fluorescent Penetrant Inspection (FPI) and helps to conduct Radiographic Tests (RT):I. Performing FPI by using Method A (Water washable) and D (Hydrophilic Emulsifier).II. Performing RT by handling: 1. X-Ray projector (Tube) By using conventional photographic film. 2. Computer Radiography (CR) by using flexible phosphor Imaging Plate (IP).• Inspect all parts and welds according to SOP and QCWI.• Read drawings and record proper documentation of inspections• Follow all company procedures written within Operation Sheets and QCWI for all NDT methods.• Ensure radiation barricade is secured and no unauthorized personal around.(RT)• Fill out all paperwork correctly and legibly.• Maintaining good housekeeping• Assigned to do team coordination to ensure the smooth process of work to achieve targets been set up by company. • Carried out NDT Inspection on various part such as:I. Combustor Inner Liner & Outer Liner. II. Combustor Dome. III. Shaft.IV. Seals.V. HPT Blades (High Pressure Turbine).VI. LPT Blades (Low Pressure Turbine).VII. Nozzles (Vanes).VIII. Inner/Outer Cowl • Carried out serviceable inspection and overhaul on Aircraft Engine for:I. GE90. II. GEnx. III. CFM56. IV. CF6-80/50 Engine.V. LM 6000/2500 Engine. VI. LMS 100.VII. CF34.

Shah Alam, Selangor, Malaysia

Performing Radiographic Testing on welded construction within Oil and Gas field:• Aids the radiography team in performing industrial radiography work performed for various clients throughout the Malaysia region. (GAS Malaysia)• Aids in conducting pipeline inspections, above ground tank inspections and fabrication inspections.• Aids in performing Nondestructive (PT and MT) and other tests and evaluations for acceptance or rejection determinations.• Assists with the organization, evaluation and documentation of radiation inspection results daily.Performing Radiographic Testing by handling: I. Gamma Ray Projector (Gamma Sources): 1. cobalt-60. 2. iridium-192. II. X-ray Generator (Tube). III. X-Ray Crawler (Pipeline Radiography): 1. Sensor controller by using Caesium-137

Shah Alam, Selangor, Malaysia

This company are doing Maintenance,repair&overhaul on aircraft components. During my internship at this company,I have been placed in the Pneumatic Department:-• Assisted in process regarding NDT method (PT and MT).• Performing overhaul on various components:I. Dual 3 Way Pneumatic Solenoid Valve.II. Ball screw actuator.III. Intermediate Pressure Check Valve.• Assisted repair process performs on various components:I. Main Heat Exchanger.II. Pneumatic Temperature Sensor.III. Stop Mechanism.III. Temperature Control Thermostat.IV. Solenoid Thermostat.V. Condenser.