Program Manager for Al-Khaadem's monthly 'Perfecting My Solah' (PMS) course, a one-day Solah course in which its main objective is to expose and guide the participants to the correct way of performing the prayer based on the Sunnah of the Prophet (peace be upon him). The programme includes theoretical learning encompassing all issues related to the Solah and practical sessions guided by trained facilitators.https://bit.ly/perfectingmysolahThe PMS course contents include:• The Adab (Etiquette) Before SolahThoharah (Purification), Ghusl (Major Ablution), Wudhu’ (Minor Ablution), Tayammum (Dry Ablution), Conditions Required before Solah, Sutrah, Adzan & Iqaamah.• The Adab (Etiquette) During SolahMovements and Recitations, Individual Solah, Congregational Solah• The Adab (Etiquette) After SolahRemembrance after Solah (Dzikr)• Issues in SolahRukun, Wajib, and Sunnah in Solah, Sujud Sahwi, Masbuq in Solah, Solah while Travelling, Recommended Voluntary Solah, Men and Women’s Solah.

Cat C Licensed Aircraft Maintenance Engineer CAAM Part-1451. Responsible for issuing and certifying Base Maintenance Release (BMR) for any Scheduled Maintenance that have been satisfactorily carried out on Beechcraft King Air B300 Aircraft.2. Responsible in liaising with Engineering Manager, Maintenance Planners, LAEs and Store Inspectors with regards to preparation and execution of any Scheduled Maintenance:• Manpower requirements• Spares procurement• Aircraft downtime• Special equipment requirements• Pre-check briefings• Documentation control• Currency of maintenance data3. Assisted in performing maintenance on:• Piaggio Aero Industries P.180 Avanti II• Airbus Helicopter EC 135 Series• Airbus Helicopter AS 350 B3

Training Manager CAAM Part-1471. Part of the core Asia Aero Engineering (AAE) team in ongoing application for Part-147 Approved Training Organisation (ATO) approval from the Civil Aviation Authority Malaysia (CAAM).2. Other responsibilities include: • Preparing the Maintenance Training Organisation Exposition (MTOE) of AAE Sdn Bhd.• Monitor and oversee operations related to AAE Part-147 to ensure all requirements are satisfied.• Carry out evaluation of potential instructors and assessors for theoretical and practical training.• Control and storage of training and examination material, records and documentation.• Liaise with Quality Assurance Manager, Safety Manager, Chief Instructor and Examination Officer with regards to issues pertaining to CAAM Part-147 operations.

Maintenance Manager (MM)Aerotree Flight Services Sdn. Bhd. Directorate General Technical Airworthiness (DGTA)1. Responsible for controlling, monitoring, organizing and overseeing Bombardier Learjet 35A aircraft day-to-day operations in preparation for Royal Malaysian Air Force's (RMAF) monthly Target Towing exercises:• Planning of Scheduled Maintenance (Phase A, B, C, D, 12-year Inspection, Out of Phase).• Certification of Bombardier Learjet 35A aircraft for release to service. (MI/S)• Defect troubleshooting and rectification. • Liaise with Store Inspector and Purchaser with regards to aircraft spares/consumables procurement.• Liaise with Vendor, Purchaser on quotations (RFQ), Purchase Order (PO) and invoice issuance.• Maintain and update technical records of aircraft on a daily basis, for traceability purposes.2. Representative of Aerotree Flight Services for annual audits conducted by Directorate General Technical Airworthiness (DGTA) for the purpose of renewing Approved Maintenance Organization (AMO) and Aircraft Certificate of Airworthiness (COA) approvals. 3. Undergone 2-months On-Job-Training at Bombardier Aerospace Services, Seletar, Singapore as the technical representative for Aerotree Flight Services in carrying out the 12-Year Inspection, Check C (1200hrs), and Check D (2400hrs) maintenance of Learjet 35A aircraft.

B2, C Licensed Aircraft Maintenance Engineer CAAM Part-1451. Part of the core team in securing approval and certification for Aerotree Defence and Services Sdn Bhd (ADSSB) as a CAAM Part-145 Approved Maintenance Organization (AMO). Heavily involved in hangar/facilities on-site audits by CAAM, technical documentation preparation and maintenance demonstration/certification. 2. Responsible for issuing and certifying Base Maintenance Release (BMR) for any Scheduled Maintenance that have been satisfactorily carried out on Beechcraft King Air B300 Aircraft.3. Responsible in liaising with E&M Manager, CAMO Maintenance Planners, LAEs and Store Inspectors with regards to preparation and execution of any Scheduled Maintenance:• Manpower requirements • Spares procurement• Aircraft downtime• Special equipment requirements • Pre-check briefings • Documentation control• Currency of maintenance data

Maintenance Inspector/Supervisor (MI/S) - Beechcraft King Air 350i, Bombardier Learjet 35ADirectorate General Technical Airworthiness (DGTA)1. Maintained King Air 350i aircraft for Royal Malaysian Air Force's (RMAF) Multi-Engine Conversion Unit (MECU) pilot training.• Airworthiness certification of all avionics tasks carried out on King Air 350i aircraft.• Authorized to issue maintenance release of King Air 350i aircraft to service.• Appointed examiner for Independent Checking (Duplicate Inspection).• Involved in planning Scheduled Maintenance of King Air 350i aircraft.• Defect troubleshooting and rectification.• Base and line maintenance.2. Maintained Learjet 35A aircraft for Royal Malaysian Air Force's (RMAF) Target Towing exercises:• Airworthiness certification of all avionics tasks carried out on Learjet 35A aircraft.• Authorized to issue maintenance release of Learjet 35A aircraft to service.• Appointed examiner for Independent Checking (Duplicate Inspection).• Involved in planning Scheduled Maintenance of Learjet 35A aircraft.• Defect troubleshooting and rectification.• Base and line maintenance.

1. Responsible for carrying out technical aircraft maintenance tasks and airworthiness certification of ATR 72-212A aircraft in accordance with accurate and up-to-date publications: • Scheduled checks (A, B, C, CPCP checks). • Out of phase maintenance. • Designated flight engineer for annual Certificate of Airworthiness (C of A) renewal flight tests. • CRS-SMI issuance for scheduled maintenance. • Defect troubleshooting and rectification. • Mandatory/optional modifications. • Detailed visual inspections (DVI) and wire repairs. • Operational and functional tests to ascertain serviceability of aircraft systems. • Spares requisition for component replacement. • Airworthiness Directives and Service Bulletins implementation. • Facilitate task delegation & manpower preparation. • Establish proper recording of work carried out for traceability and trouble-free handover. • Submit daily report of work progress to lead engineer during departmental meetings. • Deferring of defects due to time constraints and spare deficiencies. • Transposing of aircraft components for defect monitoring purposes.2. Performed day-to-day maintenance on aircraft: • De Havilland Canada DHC-7 • ATR 72-500 (-212A) • Bombardier Challenger CL300 • Bombardier Global 5000

B2 Avionics Technician1. Assisted appropriately type-rated Licensed Aircraft Engineers in carrying out maintenance tasks with regards to:• Scheduled Checks – (A, B, C checks, CPCP)• Out of Phase Checks.• Defect Troubleshooting.• Operational and Functional Tests.• Component Removal and Installation.• Detailed Visual inspections.• Engine Change. • PT6A-50 and PW127M Engine Build-Up.• Ni-Cad Battery Servicing and Overhaul.2. Assisted in performing day-to-day maintenance on aircraft:• De Havilland Canada DHC-7• ATR 72-500 (-212A)• Bombardier Challenger CL300• Bombardier Global 5000