Noel Angelo Cosico Email & Phone Number

Abu Dhabi, United Arab Emirates

United Arab Emirates

Abu Dhabi, United Arab Emirates

• Conducts pre-inspections and perform pre-operational (start-up) tests as per BNPP procedures related to Main Turbine System, Main Steam Seal and Turbine Exhaust Hood Spray Cooling; which includes the Turbine Control & Generator Monitoring System, Main Lube Oil System, Turbine Hydraulic Fluid System, Generator Stator Cooling System, Generator Shaft Seal Oil System, and Bearing Oil Transfer and Purification System.• Perform SCAT loop test for TCGMS system, including VMS.• Perform GCAT… Show more • Conducts pre-inspections and perform pre-operational (start-up) tests as per BNPP procedures related to Main Turbine System, Main Steam Seal and Turbine Exhaust Hood Spray Cooling; which includes the Turbine Control & Generator Monitoring System, Main Lube Oil System, Turbine Hydraulic Fluid System, Generator Stator Cooling System, Generator Shaft Seal Oil System, and Bearing Oil Transfer and Purification System.• Perform SCAT loop test for TCGMS system, including VMS.• Perform GCAT inspection, testing and calibration of plant transmitters, controllers, and indicators, as per BNPP SAP 18 calibration program.• Prepare documents such as data sheets and calibration results related to system hand-over specified by BNPP SAP procedure.• Verify field installation correctness as per project specifications.• Validates cable termination and conducts cable checks.• Provide technical support and perform loop checks, function-checks, and HFT.• Troubleshooting of instrumentation related design concerns and/or punch items.• Provide technical assistance in proper maintenance of instrumentation equipment after hand-over to client.• Installation & verification of physical scope on Cybersecurity such as portblockers annd tamper seals. Show less

Ras Al Khair, Saudi Arabia

• Deals with reviewing of all ITP's/QCP/Method Statement/ Material Approval prior for project plan preparation. • Coordinating with Construction Supervisor project plan drawing review (having AFC drawing officially approved documentation.)• Represent Company during weekly meeting concerning schedule plan activity and project plan on all tools and equipment needed for construction.• Assigned to Review all Subcontractor Technical Documentation Circulation prior approval to all… Show more • Deals with reviewing of all ITP's/QCP/Method Statement/ Material Approval prior for project plan preparation. • Coordinating with Construction Supervisor project plan drawing review (having AFC drawing officially approved documentation.)• Represent Company during weekly meeting concerning schedule plan activity and project plan on all tools and equipment needed for construction.• Assigned to Review all Subcontractor Technical Documentation Circulation prior approval to all concerned lead official.• Ensures instrument equipment works are compliant with project specifications, company procedures, method statements and quality assurance and controls documentation (strictly implementing the ISO 9000).• Supervision and monitoring the flow of inspection on-site and calibration prior to meet the project deadline.• Monitors all subcontractor activity priors for deadline start of Instrumentation Workload.• Witnessing repair and calibration of instrumentation, commissioning of the following equipment: Smart Flow, pressure, temperature, level transmitters, different control valves, pressure gauges and Fire & Gas alarms.• Analogue and digital controllers Fire & Gas detection/protection systems,• Reviews loop folders for final acceptance by the QA/QC Dept. before transferring to Commissioning.• Inspects vendor skids documentations before final acceptance of client.• Fully conversant with relevant International (ANSI, ASTM, API, BSI, IP, ISO, IEC, IEEE etc.) standards. Show less

Jubail, Saudi Arabia

• Deals with reviewing of all ITP's/QCP/Method Statement/ Material Approval prior for project plan preparation. • Coordinating with Construction Supervisor project plan drawing review (having AFC drawing officially approved documentation.)• Represent Company during weekly meeting concerning schedule plan activity and project plan on all tools and equipment needed for construction.• Assigned to Review all Subcontractor Technical Documentation Circulation prior approval to all… Show more • Deals with reviewing of all ITP's/QCP/Method Statement/ Material Approval prior for project plan preparation. • Coordinating with Construction Supervisor project plan drawing review (having AFC drawing officially approved documentation.)• Represent Company during weekly meeting concerning schedule plan activity and project plan on all tools and equipment needed for construction.• Assigned to Review all Subcontractor Technical Documentation Circulation prior approval to all concerned lead official.• Ensures instrument equipment works are compliant with project specifications, company procedures, method statements and quality assurance and controls documentation (strictly implementing the ISO 9000).• Supervision and monitoring the flow of inspection on-site and calibration prior to meet the project deadline.• Monitors all subcontractor activity priors for deadline start of Instrumentation Workload.• Witnessing repair and calibration of instrumentation, commissioning of the following equipment: Smart Flow, pressure, temperature, level transmitters, different control valves, pressure gauges and Fire & Gas alarms.• Analogue and digital controllers Fire & Gas detection/protection systems,• Reviews loop folders for final acceptance by the QA/QC Dept. before transferring to Commissioning.• Inspects vendor skids documentations before final acceptance of client.• Fully conversant with relevant International (ANSI, ASTM, API, BSI, IP, ISO, IEC, IEEE etc.) standards. Show less

Simlong Batangas, Philippines

Duties and responsibilities:• Deals with reviewing of all ITP's/QCP/Method Statement/ Material Approval prior for project plan preparation.• Coordinating with Construction Supervisor project plan drawing review (having AFC drawing officially approved documentation.)• Represent Company during weekly meeting concerning schedule plan activity and project plan on all tools and equipment needed for construction.• Assigned to Review all Subcontractor Technical Documentation… Show more Duties and responsibilities:• Deals with reviewing of all ITP's/QCP/Method Statement/ Material Approval prior for project plan preparation.• Coordinating with Construction Supervisor project plan drawing review (having AFC drawing officially approved documentation.)• Represent Company during weekly meeting concerning schedule plan activity and project plan on all tools and equipment needed for construction.• Assigned to Review all Subcontractor Technical Documentation Circulation prior approval to all concerned lead official.• Ensures instrument equipment works are compliant with project specifications, company procedures, method statements and quality assurance and controls documentation (strictly implementing the ISO 2000 and ISO 9000).• Supervision and monitoring the flow of inspection on-site and calibration prior to meet the project deadline.• Monitors all subcontractor activity priors for deadline start of Instrumentation Workload.• Analyze every area to be surveyed and witnessed prior to RFI issuance to the main client for inspection.• Witnessing repair and calibration of instrumentation, commissioning of the following equipment: Smart Flow, pressure, temperature, level transmitters, different control valves, pressure gauges and Fire & Gas alarms.• Analog and digital controllers Fire&Gas detection/protection systems.• Handles ESD (Emergency shutdown), Pneumatic and hydraulic shutdown panels and control systems.• Reviews loop folders for final acceptance by the QA/QC Dept. before transferring to Commissioning.• Inspects vendor skids before final acceptance of client.• On-site audits to subcontractor.• Ensures all safety practices and procedures are followed and corrects unsafe work practices.• Fully conversant with relevant International (ANSI, ASTM, API, BSI, IP, ISO, IEC, IEEE etc.) Show less

Alabang, Philippines

• Review and define goals of the project completion and ensure on time completion of all activities.• Prepare, communicate and track daily work schedules for all project activities, and supervise tool box meetings.• Plan and manage internal resources allocated to the project.• Decide actions and tasks where in cases of non availability of the Project Manager, and is the only authorized signatory in behalf of.• Monitor progress of the project in a regular basis, leading… Show more • Review and define goals of the project completion and ensure on time completion of all activities.• Prepare, communicate and track daily work schedules for all project activities, and supervise tool box meetings.• Plan and manage internal resources allocated to the project.• Decide actions and tasks where in cases of non availability of the Project Manager, and is the only authorized signatory in behalf of.• Monitor progress of the project in a regular basis, leading coordination meetings with the sub-contractors and the client respectively.• Ensures and implements safety regulations on site. Show less

Malate Manila, Philippines

• Oversees the evaluation of engineering proposals, designs, estimates and shop drawings for sound electrical engineering practice in the project site.• Ensures all effective and efficient implementation of company rules and regulations, quality policies, systems and procedures.• Provides technical assistance and resolution when electrical or engineering problems are encountered before, during, and after construction.• Assembles electrical and electronic systems and prototypes… Show more • Oversees the evaluation of engineering proposals, designs, estimates and shop drawings for sound electrical engineering practice in the project site.• Ensures all effective and efficient implementation of company rules and regulations, quality policies, systems and procedures.• Provides technical assistance and resolution when electrical or engineering problems are encountered before, during, and after construction.• Assembles electrical and electronic systems and prototypes according to engineering data and knowledge of electrical principles, using hand tools and measuring instruments.• Installs and maintains electrical control systems and solid state equipment.• Modifies electrical prototypes, parts, assemblies, and systems to correct functional deviations.• Constructs and operates test equipment to evaluate performance of developmental parts, assemblies, or systems under simulated operating conditions, and record results.• Collaborates with other project personnel to identify, define, and solve developmental problems pertaining to electrical designs and installations.• Prepares commissioning procedures for electrical installations.• Prepares project cost and work-time estimates.• Draws or modifies diagrams and write engineering specifications to clarify design details and functional criteria of experimental electronics units.• Conducts regular inspections for quality control and assurance programs, reporting findings and recommendations.• Plans, schedules and monitors electrical work of support personnel.• Performs method and sequence of operations for developing and testing experimental electronic and electrical equipment.• Prepares and submits necessary reports and documents required by the Management.• Performs other management mandated functions.• Ensures that all electrical designs conform to established safety and design standards and criteria. Show less

Batam, Indonesia

• Perform the duties of MC Electrical Engineer when on leave, performing tasks such as preparation of document attachments for ITRs, distribution and scheduling of internal MC inspections; • Notifying final inspections with the client; prepare and update weekly progress reports for MC Lead Engineer; and attending department meetings. • Using PIMS (Project Information Management System) to monitor information on ITR index, cable completion/termination schedules, and updates on ITR tag… Show more • Perform the duties of MC Electrical Engineer when on leave, performing tasks such as preparation of document attachments for ITRs, distribution and scheduling of internal MC inspections; • Notifying final inspections with the client; prepare and update weekly progress reports for MC Lead Engineer; and attending department meetings. • Using PIMS (Project Information Management System) to monitor information on ITR index, cable completion/termination schedules, and updates on ITR tag items. • Supervise installation, calibration, trouble shooting, testing, loop checking and pre-commissioning of various electrical and instrument cables, motors, breakers, lightings, electronics and pneumatic instruments. • Pre-commissioning of turbines, switchgears fire & gas instruments, telecom and public address equipment. • Prepare Calibration, Loop Check and Pressure Test Reports for Client’s approval. • Rectify all punch listed items work site inspector and safety tags and monitoring of energized equipment. Mark up changes on P & ID and field wiring layout for as built. • Checks and performs acceptable cable glanding, routing, termination, MCT schedule, including final preparation of cables by hot and cold shrink.• Ensure that safety practices and precautions are strictly complied and adhered to while performing work. Show less

Ortigas Ave, Philippines

• Responsible for the development, communication, monitoring and maintenance of transmission and sub-transmissions’ operating guidelines; Substation and transmission design, specification, protection and control, estimating involving the aid of software such as Auto Cad and WOMS, specialized in high voltage underground cables; • Perform Factory Acceptance Test, Site Acceptance Test, Commissioning, and Technical evaluation of bids for the supply of transmission and sub-transmission… Show more • Responsible for the development, communication, monitoring and maintenance of transmission and sub-transmissions’ operating guidelines; Substation and transmission design, specification, protection and control, estimating involving the aid of software such as Auto Cad and WOMS, specialized in high voltage underground cables; • Perform Factory Acceptance Test, Site Acceptance Test, Commissioning, and Technical evaluation of bids for the supply of transmission and sub-transmission materials, tools and equipments, and turnkey projects; • Ensure the quality and technical standards for overhead and underground sub-transmission lines, and substation; • Optimization of existing technologies and management and implementation of R&D projects, researches and studies for medium to high voltage overhead and underground transmission. • Ensure that safety practices and precautions are strictly complied and adhered to while performing work. Show less

Bachelor Of Science (Bs), Electrical Engineering

Activities and Societies: PEP Squad

Bachelor Of Science (Bs), Electrical Engineering