Nooraleyda Nabila Rosli Email & Phone Number

Kedah, Malaysia

Penang, Malaysia

Learnt to assign, manage, plan, and discuss ideas on problem solving method in terms of design, management, etc.Learnt to propose new system in maintaining documents related to drawings recordLearnt to oversee and brainstorming ideas on solving on-site problems during installation• Create new system to standardized engineering drawing preparation• Attend meeting with JKR, main contractor and other related company• Prepare, present and explain design drawing to related authority• Liaise with SIRIM for materials integrity test• Deals with CIDB and JKR on project declaration and levi• Create and prepare documents for clients' confirmation on design and requirements• Check design drawing prepared by draughtsman before sending out to client• Liaise with on-site installer regarding installation problems and difficulties• Attend meeting with clients for design requirement• Liaise with Sales Executive and Site Supervisor for client's design requirement and on-site condition• Deal with client on design drawing - propose design options for client• Prepare documents for JTruss (JKR) certificate renewal• Manage team members on-hand project and observe their progress to commit the timeline capacity• Attend interview session for new team members nomination - draughtsman, quantity surveyor and site supervisor• Prepare 3D model for truss system• Explain and brief new team members on company's projects, typical requirements and design, etc.• Keep track on project progress, completion and submission• Organize and create meeting with team members to discuss on new system created and problem arises• Prepare letters to authority and client• Design and calculate loadings and materials needed for new proposed product by company - lightweight cabin

Alor Setar, Kedah, Malaysia

1. Project Progress Claim SubmissionTo prepare project progress claim submission for every half or end month for every project awarded. The project progress claim prepared should follows the actual work done on site by performing site inspection or site visit to the site for every claim to prepare.2. Project Bill of QuantitiesTo prepare and calculate the costing involves for every new project tender before the deadline of the tender submission.3. Site Inspection To perform site inspection for the preparation of the progress claim.Current Project in Progress:-1. 25 Storey of Service Condominium and Retail Outlets in Alor Setar, Kedah for: GPC Development Sdn Bhd2. 22 units Double Storey Semi-Detached House at Taman Selasih, Simpang Empat for G Garden Housing Development (M) Sdn Bhd

Alor Setar, Kedah, Malaysia

1. Project TrackingProduce a spreadsheet to keep track on project progress. Propose a new system of tracking progress to improve project quality as well as to keep record on problems encountered on previous project so that can improve on next project. To record before and after project evaluation. To assist in holding meeting with services and engineering team for project purposes. To help in brainstorming ideas for project problems solving.2. QuotationTo create quotation for service maintenance and trading type for client based on client's request. To calculate the costing of materials, man-days, transportation and allowance for the quotation preparation. To ensure the VO job is quoted if there's any during servicing work.3. SOP for Service Maintenance JobTo create and propose new SOP for Service Maintenance Job so that the service job can be standardize and new staff can follow the SOP as well to do the service maintenance job. To make sure and do a sudden spot check on staff to make sure they follow the SOP set. To also set a KPI tracking for service team and to get client's comment on the service work provided to either satisfy the needs of clients or not.4. Sales and MarketingTo do sales and marketing job as well when client informed that their system has defect or problem. To suggest client to use in-house machine which is much more advance in technology and make sure client to give either confirmation or rejection of the quotation during the quotation validation date.5. JKKP InspectionTo liase with JKKP officer on the inspection of factory and machineries for license renewal.6. Drawing and BOM CheckingTo check drawing and BOM sent out by Engineers before proceeding to fabrication and to ensure that the materials requested by Engineers are enough and not producing too much wastage for the fabrication work.

Bukit Mertajam, Penang, Malaysia

Below are part of the tasked that was given and assigned to me as for now.1. Produce Tender/Approval DrawingThe Approval and Tender Drawing was produced by using the Solidworks application according to the Project Confirmation request from the clients. 2. Structural AnalysisThe structure of the building was analysed by using the STAAD Pro application in order to determine the optimum and most suitable sizes of beam to use in the construction. Besides, the analysis was done in various kind of environmental conditions such as winter, earthquake, typhoon and etc. 3. Connection CheckingThe structure was assembly by using various kind of connections such as apex plate, end-vertical, bottom plate and etc. In order to determine the maximum capacity of the bolts and screws used in the connection, a connection analysis checking should be done. In a simpler way, the number of bolts and screws in need were determined in this analysis checking. 4. Bill of MaterialsBill of Materials is the quantity of materials need to supply for the project construction. The Materials includes structures, framings, sheating, PU Panel, ventilation system and etc. The calculation of the materials need to supply depends on the structure and layout of the building itself. The total number of screws, plates and connection as well as additional items such as paint, glass wool and etc were also calculated and determined in the bill of materials.

1. CROSS-CHECKING DRAWINGIn cross-checking drawing, the most used drawing plan is the architecture drawing. Usually, all the Civil and Structural drawing plans and landscape drawing will be crossed-check with architecture drawing as architecture drawing should contains the least amount of mistakes. After that, a list of comments is made to send out to the consultant, architect and etc to clarify the drawing doubts. 2. GROUND BEAM AND PILE CAP TAKING OFFThe taking off of ground beams and pile caps are calculated by referring to the ground beams drawing plan details and pile caps drawing plan details to the level of the floor finish shown in architecture drawing. The taking off calculation is very important to determine the cut and fill volume of the specific area. From the result of the calculation, the amount of earth need to import into the site can be estimated. 3. OVERALL BACKFILL VOLUME CALCULATIONThe overall backfill volume calculation is the same calculation used for taking off. The backfill volume is the summation of the total volume of all taking off. In this calculation, the average existing level on site is very important to determine the overall backfill volume calculation. The overall backfill volume calculation includes all the Civil and Structural, Architecture and Landscape drawing plans. The result of overall backfill volume calculated, the amount of earth need to import into the site can be estimated for the whole area.4. SECTION-CUT DRAWINGThe section cut drawing is used to determine the clashing of pipes after superimposed drawing is done. The section cut drawing will show either the pipes will clash or just pass by each other. Besides, from the section cut drawing, the effect of the pipes underneath the earth to the construction can also be determined. Usually, the drawing plans involved in this activities are the Mechanical and Electrical drawing and the Civil and Structural drawing.

Bachelor Degree With Honors In Civil Engineering, Civil Engineering

Spm