• Review of documents / Mill Test Certificate pertaining to raw materials, verification of bill of materials components and Visual / Dimensional inspection of incoming material as per QAP.• Giving Training and qualifying of welders for all projects in different welding process, Techniques, Positions and Materials.• Preparing and Qualifying of WQT, PQR WPS for the New Projects as per Projects and Client Requirement.• Review and approval of Welding procedure specification (WPS) and… Show more • Review of documents / Mill Test Certificate pertaining to raw materials, verification of bill of materials components and Visual / Dimensional inspection of incoming material as per QAP.• Giving Training and qualifying of welders for all projects in different welding process, Techniques, Positions and Materials.• Preparing and Qualifying of WQT, PQR WPS for the New Projects as per Projects and Client Requirement.• Review and approval of Welding procedure specification (WPS) and witnessing procedure qualification record (PQR) & welder’s performance qualification record (WPQ) and Electrode Qualification• Review, interpret and evaluate non‐destructive test result in accordance with the applicable codes and standards.• Working with SMAW, GTAW, SAW, GMA techniques. Inspection of Fit‐Up, Weld Visual. Witnessing of Hydro‐test &Pneumatic‐test, Inspections Structural fabrication jobs, underground and above ground piping and package preparation, Co‐ordination with Clients, Third party inspectors and contractors. PAINTING & COATING• Review of Raw Material Certificates and Witnessing of abrasive sieve analysis.• Review the specifications & scope of work for Coating to ensure the integrity of the paint coating systems by reviewing procedures• Review of documents like job procedures, QCP, painting specifications and procedures etc., for compliance of the concerned codes and standards, additional requirements as per specification sequence of activities, coating scheme and job hazard analysis.• Checking the physical and chemical test of the paint film and Review, the calibration status of all test instruments required.• Inspection of the material received at site and witnessing of various laboratory tests pertaining to aforesaid coatings as per the relevant specification/procedure.• surface preparation of all steel plates, pipe and structural supports and Tanks to assure free from any defect and contaminations prior to blast cleaning and safety Show less

• Review of documents / Mill Test Certificate pertaining to raw materials, verification of bill of materials components and Visual / Dimensional inspection of incoming material as per QAP.• Preparing and Qualifying of WQT, PQR WPS for the New Projects as per Projects and Client Requirement. • Review and approval of Welding procedure specification (WPS) and witnessing procedure qualification record (PQR) & welder’s performance qualification record (WPQ) and Electrode… Show more • Review of documents / Mill Test Certificate pertaining to raw materials, verification of bill of materials components and Visual / Dimensional inspection of incoming material as per QAP.• Preparing and Qualifying of WQT, PQR WPS for the New Projects as per Projects and Client Requirement. • Review and approval of Welding procedure specification (WPS) and witnessing procedure qualification record (PQR) & welder’s performance qualification record (WPQ) and Electrode Qualification• Review, interpret and evaluate non-destructive test result in accordance with the applicable codes and standards.• Working with SMAW, GTAW, SAW, GMA techniques. Inspection of Fit-Up, Weld Visual. Witnessing of Hydro-test &Pneumatic-test, Inspections Structural fabrication jobs, underground and above ground piping and package preparation, Co-ordination with Clients, Third party inspectors and contractors. PAINTING & COATING• Review of Raw Material Certificates and Witnessing of abrasive sieve analysis.• Review the specifications & scope of work for Coating to ensure the integrity of the paint coating systems by reviewing procedures• Review of documents like job procedures, QCP, painting specifications and procedures etc, for compliance of the concerned codes and standards, additional requirements as per specification sequence of activities, coating scheme and job hazard analysis.• Checking the physical and chemical test of the paint film and Review, the calibration status of all test instruments required.• Inspection of the material received at site and Witnessing of various laboratory tests pertaining to aforesaid coatings as per the relevant specification/procedure.• surface preparation of all steel plates , pipe and structural supports and Tanks to assure free from any defect and contaminations prior to blast cleaning and safety and environment condition Show less

Reviewing of the drawings and approved painting and coating application procedures.• Ensuring of contractor compliance to the client and manufacturing specification.• Inspecting the storage of coating materials.• Checking the tracking list of the materials.• Checking of the batch certificate and test report of coating materials.• Checking of the surface preparation as per the standards requirement and the application of priming.• Checking the oven preparation and… Show more Reviewing of the drawings and approved painting and coating application procedures.• Ensuring of contractor compliance to the client and manufacturing specification.• Inspecting the storage of coating materials.• Checking the tracking list of the materials.• Checking of the batch certificate and test report of coating materials.• Checking of the surface preparation as per the standards requirement and the application of priming.• Checking the oven preparation and pre-heat temperature & curing temperature as per the coating material type.• Monitoring/Witnessing of coating activities.• Checking the calibration validity of testing equipment’s.• Witnessing of testing such as impact test, Adhesion test and bend test.• Witnessing of holiday test.• Assessing coating defects and suggesting remedial actions.• Reviewing of Inspection reports and the preparation of Inspection release note.• Reviewing of client procedure and ITP for internal and external FBE and liquid Coating system.• Monitoring the loading of coated pipes/spools in order not to damage the coating.• Ensuring of proper handling for Internal and External Coated pipes/Spools.• Checking the stencilling of item description on the coated items.• Preparation of daily Inspection report and submit to the client.• Preparation of Inspection release note and delivery note and keep for record.• Overseeing complete external coating/painting activities• Ensuring:o Execution of painting/coating inspection and testing activities on pipelines as per the project specificationo Usage of coating material as per the client specification• Assuring proper storage and preservation of coating material on site• Accessing:o Rust condition of the substrate prior to treatmento Prepared surface in accordance with Standard• Checking& recording:o Percentage Relative Humidity, Dew Point, Steel and Air Temperatureo Wet & Dry Film Thickness Show less

Role:• Overseeing complete external coating/painting activities• Ensuring:o Execution of painting/coating inspection and testing activities on pipelines as per the project specificationo Usage of coating material as per the client specification• Assuring proper storage and preservation of coating material on site• Accessing:o Rust condition of the substrate prior to treatmento Prepared surface in accordance with Standard• Checking& recording:o Percentage… Show more Role:• Overseeing complete external coating/painting activities• Ensuring:o Execution of painting/coating inspection and testing activities on pipelines as per the project specificationo Usage of coating material as per the client specification• Assuring proper storage and preservation of coating material on site• Accessing:o Rust condition of the substrate prior to treatmento Prepared surface in accordance with Standard• Checking& recording:o Percentage Relative Humidity, Dew Point, Steel and Air Temperatureo Wet & Dry Film Thickness• Detected coating fault and remedy• Drafting Non-Conformance Report (NCR) whenever it was needed• Liaising with Quality Manager on the work performance and authority to stop work in any areas where deficiencies remain uncorrected• Monitoring of welding preparation and inspection. Familiar with corrosion loop concept• Inspects drawings, design and specifications for boilers and other vessels, Inspects materials used, safety devices, regulators, construction quality, brace and rivet tension, welding, piping, corrosion, cracking, safety valve operation and other quality testing for liquid and gas vessels (both mild steel and stainless steel)• Welding inspection.• Fabrication and construction of piping and structural.• Studying drawing of piping and structure, preparation of work schedule to complete the project. • Able to carry out producer qualification & performance qualification test for welding work.• Conversant with various welding process such as SMAW, GTAW, GMAW and SAW.• Conversant with Carbon steel, stainless steel, alloy steel and duplex stainless steel.• Knowledge of destructive and non destructive testing.• Preparation of documents required for inspection according to the applicable codes and standards.• Co-ordination with inspection agencies and client. • Monitoring welding processes with pre and post –weld heat treatment process if any requirement as per code and drawings. Show less

Role:• Overseeing complete external coating/painting activities• Ensuring:o Execution of painting/coating inspection and testing activities on pipelines as per the project specificationo Usage of coating material as per the client specification• Assuring proper storage and preservation of coating material on site• Accessing:o Rust condition of the substrate prior to treatmento Prepared surface in accordance with Standard• Checking& recording:o Percentage… Show more Role:• Overseeing complete external coating/painting activities• Ensuring:o Execution of painting/coating inspection and testing activities on pipelines as per the project specificationo Usage of coating material as per the client specification• Assuring proper storage and preservation of coating material on site• Accessing:o Rust condition of the substrate prior to treatmento Prepared surface in accordance with Standard• Checking& recording:o Percentage Relative Humidity, Dew Point, Steel and Air Temperatureo Wet & Dry Film Thickness• Detected coating fault and remedy• Drafting Non-Conformance Report (NCR) whenever it was needed• Liaising with Quality Manager on the work performance and authority to stop work in any areas where deficiencies remain uncorrected Show less

Role:• Overseeing complete external coating/painting activities• Ensuring:o Execution of painting/coating inspection and testing activities on pipelines as per the project specificationo Usage of coating material as per the client specification• Assuring proper storage and preservation of coating material on site• Accessing:o Rust condition of the substrate prior to treatmento Prepared surface in accordance with Standard• Checking& recording:o Percentage… Show more Role:• Overseeing complete external coating/painting activities• Ensuring:o Execution of painting/coating inspection and testing activities on pipelines as per the project specificationo Usage of coating material as per the client specification• Assuring proper storage and preservation of coating material on site• Accessing:o Rust condition of the substrate prior to treatmento Prepared surface in accordance with Standard• Checking& recording:o Percentage Relative Humidity, Dew Point, Steel and Air Temperatureo Wet & Dry Film Thickness• Detected coating fault and remedy• Drafting Non-Conformance Report (NCR) whenever it was needed• Liaising with Quality Manager on the work performance and authority to stop work in any areas where deficiencies remain uncorrected Show less

Duties & Responsibilities:• Inspection of Ferrous and Nonferrous Cladding Plates and Activities Include-Raw Material Inspection, Preparation of QAP,WPS,PQR & Welder Qualification Test, In process Inspection, Inspection and Reviewing of Destructive and Non Destructive Testing’s, painting inspection, Coordinating in Third Party Inspection, Customer Audits, Liaise directly With Client & Third Party Representative on any Issues relates to Welding, NDE, Fabrication & getting final clearance