AeroLeads people directory · profile

Peter Sargon Ray, P.E. Email & Phone Number

R and D Laser Aligment Systems Engineering Lead at Lawrence Livermore National Laboratory
Location: Livermore, California, United States 11 work roles 2 schools
1 work email found @llnl.gov LinkedIn matched
✓ Verified May 2026 4 data sources Profile completeness 100%

Contact Signals · 1 work email

Work email p****@llnl.gov
LinkedIn Profile matched
3 free lookups remaining · No credit card
Current company
Lawrence Livermore National Laboratory
Role
R and D Laser Aligment Systems Engineering Lead
Location
Livermore, California, United States
Company size
9495 employees

Who is Peter Sargon Ray, P.E.? Overview

A concise factual answer block for searchers comparing this professional profile.

Quick answer

Peter Sargon Ray, P.E. is listed as R and D Laser Aligment Systems Engineering Lead at Lawrence Livermore National Laboratory, a company with 9495 employees, based in Livermore, California, United States. AeroLeads shows a work email signal at llnl.gov and a matched LinkedIn profile for Peter Sargon Ray, P.E..

Peter Sargon Ray, P.E. previously worked as R&D Laser Aligment Systems Engineering Lead at Lawrence Livermore National Laboratory and R&D Systems Engineer at Sandia National Laboratories. Peter Sargon Ray, P.E. holds Msme, Masters In Science, Mechanical Design Mechantronics And Precision Machine Design from San José State University.

Company email context

Email format at Lawrence Livermore National Laboratory

This section adds company-level context without repeating Peter Sargon Ray, P.E.'s masked contact details.

*@llnl.gov
71% confidence

AeroLeads found 1 current-domain work email signal for Peter Sargon Ray, P.E.. Compare company email patterns before reaching out.

View email format View company profile Management contacts
Profile bio

About Peter Sargon Ray, P.E.

• Principal Design Engineer and innovative analyst with over 25 years of experience in mechanical and manufacturing engineering with great conceptual design ability• Over 20 years of experience of CAD Design experience• Diverse experience in design of new products from conceptual design through development/testing, production, product certification, Qualification verification validation, and product delivery• Specializing in design and integration of precision automated machinery/robotics• Advanced experience with electrical packaging and product design• Experience in continuous design (kaizen) improvement, GMP, and SPC process control and development• Project management of cross-functional team members including vendors/ suppliers• Advanced experience with high&low volume manufacturing operations & practices• Hands on experience (machining i.e. Mill, Lathe, and various machine shop tools)

Listed skills include Design For Manufacturing, Finite Element Analysis, Solidworks, Pro Engineer, and 32 others.

Current workplace

Peter Sargon Ray, P.E.'s current company

Company context helps verify the profile and gives searchers a useful next step.

Lawrence Livermore National Laboratory
Lawrence Livermore National Laboratory
R and D Laser Aligment Systems Engineering Lead
Livermore, CA, US
Website
llnl.gov
Employees
9495
AeroLeads page
Company profile
View company profile Email format
11 roles

Peter Sargon Ray, P.E. work experience

A career timeline built from the work history available for this profile.

R&D Laser Aligment Systems Engineering Lead

Current
Lawrence Livermore National Laboratory
  • Manage NIF Alignment Engineering Department Project Engineering Team and Maintenance Team
  • Manage, develop, and commission precision laser alignment systems to support Fusion Ignition
  • Systems Engineering of precision electromechanical systems which includes requirements development, design and production qualification, deployment/Fielding/commissioning, Surveillance/monitoring fielded equipment
  • Lead cross functional teams
  • Lead calibration of precision laser and image… Show more
  • Lead calibration of precision laser and image alignment systems
Jun 2020 - Present

R&D Principal Mechanical Engineer

Abbott

Abbott Medical Optics Milpitas Ca

  • Fast pace development of Next Generation Femto-second Cornea Flap cutting machine. 24 months from whiteboard to Beta prototype and animal studies.
  • Led the development of the system chassis
  • for laser cornea cutting machine(sheet metal, tubular frame. and skins/panels)
  • Led the design of machine panels using RIM, ThermoForm, Structural foam, 3d printing prototype process
  • Led development of Robotic XYZ gantry to guide and support laser system
  • Led vacuum system… Show more
Apr 2015 - May 2017

R&D Systems Engineer

Sandia National Laboratories

Livermore

  • Participate in all aspects of product development-Design Definition, Development, Delivery, Support
  • Design Definition- Generating Requirements and mapping, Interface control documents, environmental and functional specifications and used Fagan inspection for defect detection.
  • Development-Review designs develop tests and qualification plans. Participate in concurrent qualification activities by working with production early discussing gauges designs, tooling, testers, and product… Show more
  • Development-Review designs develop tests and qualification plans. Participate in concurrent qualification activities by working with production early discussing gauges designs, tooling, testers, and product acceptance.
  • Delivery- CONOPS review, transportation and handling process development, Process Prove In Lot, verify assembly procedures, tooling, safety requirements, and shipping configurations. Process observations of Final.
  • Support- Provide field equipment, survey the health of the product in the field, dismantlement and discovery
May 2013 - Apr 2015

R&D Mechanical Design Engineer

Lawrence Livermore National Laboratory

Livermore Ca

  • NIF Department, Precision Mechanical (PM) Group
  • NIF- Precision Optics and Target Group
  • Designed fixtures, tooling, weldments, machine design, cleanroom components
  • Mechanical Design utilizing Pro-E
  • Analytical Analysis utilizing MathCad
  • FEA utilizing Mechanica
Jun 2011 - May 2013

R&D Mechanical Design Engineer

Sensor Concepts Inc.

Livermore

  • Lead Mechanical Design efforts for radar imaging equipment
  • Designed radar imaging capital tooling equipment and various mechanisms
  • Designed hand held radar system - electrical product packaging
  • Designed composite electrical radar enclosure and radome utilizing various foams, fiberglass, and carbon fiber
  • Designed frame and truss weldments, troubleshoot weld failures, X-Ray, ultrasonic, liquid penetrate testing
  • Product design to meet Mil-Specs, UL, FM, IEC, CE, ATEX,… Show more
Feb 2010 - Jul 2011

R&D Mechanical Design Engineer

Mid Labs

Oakland

  • Designed of FDA surgical counsel, sheet metal enclosures, injection molded panels for ophthalmic medical devices
  • Disposable Design: High volume molded surgical devices for vitrectomy surgery
  • Electronic packaging design
  • Designed automated machines with smart motors and servo, pneumatics, precision mechanisms, and robotic end effectors
  • Designed precision kinematic tooling and flexures for clean room facilities
  • Designed metrology inspection systems using optics… Show more
Feb 2007 - Feb 2010

R&D Mechanical Design Engineer

Edc Biosystems, Milpitas, Ca
  • Mechanical Design for Biotech and Hard Disk Industry Tooling and Capital Equipment
  • Designed pneumatic mechanical system, including end effectors and various other motion/robotics
  • Designed fixtures for manufacturing
  • Designed sheet metal enclosures, frames and machine brackets
  • Designed 4 axis lead screw robotic actuator system and various other motor actuated mechanical systems
  • Designed miniature fluid pump and vacuum systems
Feb 2005 - Jan 2007

Mechanical Engineer

New United Motor Manufacturing Inc (Nummi)
  • Mechanical Design for manufacturing. Helped develop tools and fixtures for production
  • Integration of pneumatics and motor control designs
  • PLC (Programmable Logic Control) troubleshooting.
  • Created motor control and positioning device systems utilizing various sensors and motors
  • Built Access data base for all spare parts for 2005 Toyota Tacoma manufacturing
  • Implemented “Just in Time Manufacturing” principles
Dec 2003 - Feb 2005

R&D Engineer

Caltrans, Sacramento Ca.
  • Transportation R&D engineer
  • Implemented R&D and technology transfer
  • Generated research project updates and implementation plans
  • Collected data from engineers and experimental data after testing
  • Reconstructed and populated Access, and File Maker Pro, database
  • Focused on issues such as cost benefits, methodology, process analysis, and commercialization
Nov 2000 - Jan 2002
Team & coworkers

Colleagues at Lawrence Livermore National Laboratory

Other employees you can reach at llnl.gov. View company contacts for 9495 employees →

AD Amanda Deinhart Wilson Amanda Deinhart Wilson Colleague at Lawrence Livermore National LaboratoryModesto, California, United States, United States View → GL Greg Lee Greg Lee Colleague at Lawrence Livermore National LaboratorySan Ramon, California, United States, United States View → MP Michelle Perez-Robles Michelle Perez-Robles Colleague at Lawrence Livermore National LaboratoryUnited States, United States View → DR Dean Rusby Dean Rusby Colleague at Lawrence Livermore National LaboratoryLivermore, California, United States, United States View → ML Marvin L. Marvin L. Colleague at Lawrence Livermore National LaboratoryKilleen-Temple Area, United States View → MM Marco Mehl Marco Mehl Colleague at Lawrence Livermore National LaboratoryLivermore, California, United States, United States View → JM Jace M. Jace M. Colleague at Lawrence Livermore National LaboratorySan Francisco Bay Area, United States View → JC Julia Chaffin Julia Chaffin Colleague at Lawrence Livermore National LaboratorySan Francisco Bay Area, United States View → KY Kathy Yasukawa Kathy Yasukawa Colleague at Lawrence Livermore National LaboratoryTracy, California, United States, United States View → JT Jim Turner Jim Turner Colleague at Lawrence Livermore National LaboratoryBrentwood, California, United States, United States View →
2 education records

Peter Sargon Ray, P.E. education

Msme, Masters In Science, Mechanical Design Mechantronics And Precision Machine Design

San José State University

Activities and Societies: Private Pilot

Bsme, Mechanical Design Engineering, Minor Math

San José State University

Activities and Societies: SJSU Boxing Team Senior Project: Hovercraft http://www.youtube.com/watch?v=Nf-oqkcqPtk

FAQ

Frequently asked questions about Peter Sargon Ray, P.E.

Quick answers generated from the profile data available on this page.

What company does Peter Sargon Ray, P.E. work for?

Peter Sargon Ray, P.E. works for Lawrence Livermore National Laboratory.

What is Peter Sargon Ray, P.E.'s role at Lawrence Livermore National Laboratory?

Peter Sargon Ray, P.E. is listed as R and D Laser Aligment Systems Engineering Lead at Lawrence Livermore National Laboratory.

What is Peter Sargon Ray, P.E.'s email address?

AeroLeads has found 1 work email signal at @llnl.gov for Peter Sargon Ray, P.E. at Lawrence Livermore National Laboratory.

Where is Peter Sargon Ray, P.E. based?

Peter Sargon Ray, P.E. is based in Livermore, California, United States while working with Lawrence Livermore National Laboratory.

What companies has Peter Sargon Ray, P.E. worked for?

Peter Sargon Ray, P.E. has worked for Lawrence Livermore National Laboratory, Sandia National Laboratories, Abbott, Sensor Concepts Inc., and Mid Labs.

Who are Peter Sargon Ray, P.E.'s colleagues at Lawrence Livermore National Laboratory?

Peter Sargon Ray, P.E.'s colleagues at Lawrence Livermore National Laboratory include Amanda Deinhart Wilson, Greg Lee, Michelle Perez-Robles, Dean Rusby, and Marvin L..

How can I contact Peter Sargon Ray, P.E.?

You can use AeroLeads to view verified contact signals for Peter Sargon Ray, P.E. at Lawrence Livermore National Laboratory, including work email, phone, and LinkedIn data when available.

What schools did Peter Sargon Ray, P.E. attend?

Peter Sargon Ray, P.E. holds Msme, Masters In Science, Mechanical Design Mechantronics And Precision Machine Design from San José State University.

What skills is Peter Sargon Ray, P.E. known for?

Peter Sargon Ray, P.E. is listed with skills including Design For Manufacturing, Finite Element Analysis, Solidworks, Pro Engineer, Manufacturing, R&D, Machining, and Mechanical Engineering.

Find 750M verified contacts

Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.