Provide technical maintenance support, guidance and direction to Comiskey Mining and ensure the need to work collaboratively is maintained between Comiskey and Middlemount South Mining CompanyKey Duties• Ensure safe working practices are maintained and all tasks are risk assessed and controls put in place to achieve a low level of risk• Assist the mining company with the development and review of Standard Operating Procedures and Safe Work Instructions• Ensure statutory… Show more Provide technical maintenance support, guidance and direction to Comiskey Mining and ensure the need to work collaboratively is maintained between Comiskey and Middlemount South Mining CompanyKey Duties• Ensure safe working practices are maintained and all tasks are risk assessed and controls put in place to achieve a low level of risk• Assist the mining company with the development and review of Standard Operating Procedures and Safe Work Instructions• Ensure statutory compliance is maintained whilst developing new procedures and work methods• Facilitate risk assessments for maintenance and safety procedures• Carry out audits of all maintenance staff on personnel risk assessments, JSEA’s and risk assessments• Carry out audits on workshops, on site work areas, machinery and light vehicles• Ensure that the business meets, as a minimum, all environmental and regulatory requirements Show less

Responsible for the direct Management of Zenith Pacific Power Stations in Queensland Australia and Papua and New Guinea.Key DutiesMeeting Zenith Pacific and client objectives by managing staff, planning and evaluating activities, O&M budgets, cost control and contractual obligations.Develop a culture of zero harmMaintaining staff by recruiting, selecting, orienting and training employees, maintaining a safe, secure, and legal work environment, developing personal growth… Show more Responsible for the direct Management of Zenith Pacific Power Stations in Queensland Australia and Papua and New Guinea.Key DutiesMeeting Zenith Pacific and client objectives by managing staff, planning and evaluating activities, O&M budgets, cost control and contractual obligations.Develop a culture of zero harmMaintaining staff by recruiting, selecting, orienting and training employees, maintaining a safe, secure, and legal work environment, developing personal growth opportunities.Facilitating the maintenance of site assets and interface with the Asset Management team to deliver power quality and Power Station reliability.Delivering required results by communicating job expectations, planning, monitoring, and appraising results, developing, coordinating, and enforcing Zenith Pacific systems, policies, procedures, and productivity standards.Identifying strategic goals by gathering pertinent business, financial, service, and operations information. Identifying and evaluating trends and options, choosing a course of action, defining objectives, evaluating outcomes.Achieving financial objectives, by forecasting requirements and preparing annual budget.Scheduling expenditure, controlling costs. Show less

To improve the station reliability and maintenance processes and to transition operations and maintenance staff into a centralized control, and operator maintainer roles for the onsite staff. The site positions are requiring a lot of new training and setting up the station to be remotely controlled from the new Remote Operations Centre set up in Darwin.Key Duties:-• Manage the Channel Island Power Station (310MW), Weddell Power Station (129MW) and Katherine Power Station… Show more To improve the station reliability and maintenance processes and to transition operations and maintenance staff into a centralized control, and operator maintainer roles for the onsite staff. The site positions are requiring a lot of new training and setting up the station to be remotely controlled from the new Remote Operations Centre set up in Darwin.Key Duties:-• Manage the Channel Island Power Station (310MW), Weddell Power Station (129MW) and Katherine Power Station (36MW)• Maintenance and statutory compliance of all power station equipment. • Manage the direct reports to this position, Electrical Maintenance Manager, Mechanical Maintenance Manager, Control Systems Engineer, Operations Manager, 2 Remote Power Station Managers. • Develop a safety culture of Zero Harm. • Carry out safety observations/interactions weekly on all groups on site.• Ensure all work is risk assessed and provide training on the Risk Management Process• Ensure the change management process is followed for all changes on sites.• Improvement in reliability, ensure RCA process is carried out for breakdowns, maintain an equipment end of life replacement plan.• Deliver Financial Performance, within budget• Ensure that the business meets, as a minimum, all environmental licence/consent or regulatory requirements Show less

To continue to improve the maintenance processes and to set realistic component changeout and preventive maintenance schedules whilst plant upgrades in technology increases the speed at which it runs, which in turn is giving a greater output of product from the mill. As new technology is adopted, risk assess each change and go through the change management procedure for changes to happen. Develop plans to upskill the maintenance team in new technology as upgrades occur. Provide the production… Show more To continue to improve the maintenance processes and to set realistic component changeout and preventive maintenance schedules whilst plant upgrades in technology increases the speed at which it runs, which in turn is giving a greater output of product from the mill. As new technology is adopted, risk assess each change and go through the change management procedure for changes to happen. Develop plans to upskill the maintenance team in new technology as upgrades occur. Provide the production team with updated operational, and machine isolation SOP’s as changes are made. Show less

• Manage the maintenance of the HME fleet at Lake Lindsay and German Creek consisting of CAT 793D, 785C, Komatsu 830E, 985, 785 rear dump trucks, CAT D11R, Komatsu 475-3 and 475-5 dozers, Komatsu WD900 wheel dozers, Komatsu WA800 & 900 wheel loaders, CAT 776D belly dumpers, CAT 16H & 24M graders, CAT 777D & 777F water carts, CAT 773E service trucks & CAT 784B low loader.• Manage the direct reports to this position 7 Workshop Supervisors & 8 Leading Hands and indirectly for fitters, auto… Show more • Manage the maintenance of the HME fleet at Lake Lindsay and German Creek consisting of CAT 793D, 785C, Komatsu 830E, 985, 785 rear dump trucks, CAT D11R, Komatsu 475-3 and 475-5 dozers, Komatsu WD900 wheel dozers, Komatsu WA800 & 900 wheel loaders, CAT 776D belly dumpers, CAT 16H & 24M graders, CAT 777D & 777F water carts, CAT 773E service trucks & CAT 784B low loader.• Manage the direct reports to this position 7 Workshop Supervisors & 8 Leading Hands and indirectly for fitters, auto electricians, service people, tyre fitters, apprentices, and general hands.• Develop a safety culture of Zero Harm. Attend all crew’s monthly safety meetings.• Carry out safety interactions weekly on all groups on site.• Facilitate Risk Assessments as required.• Manage all OEM on site contractors and labour hire trades people for the HME workshops.• Ensure schedule compliance is above 90%.• Conduct monthly meetings with OEM’s and major suppliers.• Control of all apprentices to ensure correct training and compliance with studies.• Ensure maintenance schedule is set and achievable.• Relieve up to Engineering Manager role.• Meet daily with Production Superintendents to standardize equipment outages to best suit the running of the mine.• Conduct reviews of maintenance SOP’s & SWP’s and conduct changes through the change management process.• Ensure all maintenance staff are up to date and current with training competencies, coal mine medicals, and generic inductions.• Maintenance budget control Show less

• Manage the servicing and overhaul of the onsite fleet of Eimco & Juganaut underground loaders, Driftrunner underground personnel transporters, cranes. Compressed air systems, water pumping and filtration system that provide services to the underground mine. • Manage the direct reports to this position the Mechanical Coordinator, 2 Electrical Coordinators for all underground coal cutting machinery (ABM continuous miner, Waratah continuous miner, Waratah roadheader, Waratah hydro monitor… Show more • Manage the servicing and overhaul of the onsite fleet of Eimco & Juganaut underground loaders, Driftrunner underground personnel transporters, cranes. Compressed air systems, water pumping and filtration system that provide services to the underground mine. • Manage the direct reports to this position the Mechanical Coordinator, 2 Electrical Coordinators for all underground coal cutting machinery (ABM continuous miner, Waratah continuous miner, Waratah roadheader, Waratah hydro monitor, and all auxiliary plant associated with the hydro coal cutting equipment.• Manage the Scheduler/Planner and the Maintenance Clerk whom are also direct reports.• Report daily on the equipment availability at the 8:30am production meeting.• Relieve into Engineering Manager role• Make sure any unsafe equipment is tagged out of service until repaired and to notify the Engineering Manager of any unsafe equipment or practices.• Report back to the Engineering Manager any breakdown that will cause a production delay of more than 1 shift• Maintain the best uptime possible by approaching breakdowns with urgency• Mentor and train the maintenance team• Promote safety and lead by example• Communicate all changes to equipment to the work force• Update all changes to equipment in the equipment manuals• Promote continuous improvement• Develop relevant procedures• Facilitate Risk Assessments as required• React to faulty equipment reported with urgency• Comply to all statutory requirements Show less

• Manage the servicing and overhaul of the onsite fleet of Eimco & Juganaut underground loaders, Driftrunner underground personnel transporters, cranes, forklifts, service truck, water cart. Compressed air systems, water pumping and filtration system that provide services to the underground mine.• Checking machine approvals, and ensuring vehicle compliance with Mines and Safety legislation.• Manage the ordering of all spares, creation of statutory & routine work orders, planning of… Show more • Manage the servicing and overhaul of the onsite fleet of Eimco & Juganaut underground loaders, Driftrunner underground personnel transporters, cranes, forklifts, service truck, water cart. Compressed air systems, water pumping and filtration system that provide services to the underground mine.• Checking machine approvals, and ensuring vehicle compliance with Mines and Safety legislation.• Manage the ordering of all spares, creation of statutory & routine work orders, planning of workshop maintenance activities, and updating plant service sheets in Pulse MMS.• Manager for mechanical & electrical trades in the workshop.• Manager for the training of all mechanical and electrical apprentices.• Development of annual budget and forecast out to 5 years. Show less

In this position I was brought on to implement new maintenance schedules, policies and procedures setting up new CMMS and training systems. I Trained engineering staff in this system, and then put into practice using work orders and the planning of all tasks for the maintenance teams. Once this was done we could start to move from reactive maintenance to move towards preventive maintenance. I also introduced power factor correction into the factory and this had a great… Show more In this position I was brought on to implement new maintenance schedules, policies and procedures setting up new CMMS and training systems. I Trained engineering staff in this system, and then put into practice using work orders and the planning of all tasks for the maintenance teams. Once this was done we could start to move from reactive maintenance to move towards preventive maintenance. I also introduced power factor correction into the factory and this had a great financial saving for the company.Key Duties:-• Maintenance Team consisting of Mechanical & Electrical Fitters, Boilermakers, Machinists, and Apprentices in each trade• Overhaul and maintenance of hydraulic presses up to 2000 ton, furnaces, large (lathes, boring machines, milling machines), compressors, overhead cranes, cooling towers, transformers & HV switchgear.• Manager in charge of OSH• Manager in charge of Environmental Compliance• Planning and coordinating plant shutdowns and maintenance outages in Maximo• Implementation of JSA and safe work practices• Time keeping for all staff• Staff training and inductions Show less

• Manager with a staff of 25, including Electrical & Mechanical Fitters, Power Station Operators, and General Hands.• Planning and coordinating maintenance outages.• Compiling work permits.• Ensuring all work is carried out to the highest Safety Standards.• Liaison with Water Authorities when planning maintenance outages.• Team Building and Customer Service.• Development of maintenance procedures and safe work practices.• Report writing and recording all maintenance… Show more • Manager with a staff of 25, including Electrical & Mechanical Fitters, Power Station Operators, and General Hands.• Planning and coordinating maintenance outages.• Compiling work permits.• Ensuring all work is carried out to the highest Safety Standards.• Liaison with Water Authorities when planning maintenance outages.• Team Building and Customer Service.• Development of maintenance procedures and safe work practices.• Report writing and recording all maintenance records on the Mainpac Maintenance Management system.• Time keeping for all staff.• Project Managing and planning plant upgrade projects.• Budget control for Capex and Opex budgets.• Planning annual maintenance plan and 5 year plan. • Staff Training and Inductions.• Interviewing and employment of new staff members.• Engagement and managing of specialized on site contractors. Show less

Contract Maintenance Manager

One of four directors of company formed, who contracted to Meridian Energy to control the safe production, operation and maintenance of the 760MW Manapouri Power Station New Zealand• Scheduling and Planning plant outages and full station shutdowns• Commissioning Operator for the Landis & Gyr automation and remote control project.• Consultant for Power Station Operations & Mechanical Maintenance• Compiling and Checking of Maintenance and Operating Procedures and recording on… Show more One of four directors of company formed, who contracted to Meridian Energy to control the safe production, operation and maintenance of the 760MW Manapouri Power Station New Zealand• Scheduling and Planning plant outages and full station shutdowns• Commissioning Operator for the Landis & Gyr automation and remote control project.• Consultant for Power Station Operations & Mechanical Maintenance• Compiling and Checking of Maintenance and Operating Procedures and recording on the database• Total Control of Security Systems and Station Access• Member New Zealand Electricity Y2K working party Show less

Overall Charge of the Operation the 760MW Manapouri Underground Hydro Power Station.• Advanced Training and Development of all team members• Compliance with New Zealand Safety Standards• Compliance with New Zealand Government Management Acts• Compliance with ECNZ Quality Assurance Standards• Team Building and Internal Customer Service• Communicating with the general public• Liaison and providing service to contracting companies• Planning Generation Forecasts… Show more Overall Charge of the Operation the 760MW Manapouri Underground Hydro Power Station.• Advanced Training and Development of all team members• Compliance with New Zealand Safety Standards• Compliance with New Zealand Government Management Acts• Compliance with ECNZ Quality Assurance Standards• Team Building and Internal Customer Service• Communicating with the general public• Liaison and providing service to contracting companies• Planning Generation Forecasts and Water Level Management• Implementation of ISO 9002 & Quality Assurance Systems• Maintenance Planning and Scheduling• Compiling and issuing of Permit to Work• Control and organizing of rosters for 24hr operation of Station Show less