Rafael G. Email & Phone Number

Midland, Tx, Us

Pecos, Texas, United States

* Folliwing TOFS core values as they align with our customers own core values.*Provide asistance in every way possible to clients in regards with all our pumps at rigs, frac sites and any other location where we can help with company services.* Increasing our safety culture everywhere we go not as a rule but as a wsy of living the right way.

Al-Khobar Governorate, Saudi Arabia

• Evaluating well intervention job programs to come up with the most technical sound desitions• Well Site Coordinator for Aramco Operations in Saudi Arabia.• Onsite support for anything related to well operations, including but not limited to Acid stimulations jobs, Coiled tubing nitrogen lifting, well induction, wellflow tests in current and active producing wells, slick line ops, pressure pumping and all Nitrogen related operations.• Running the site with direct responsibility of at least 54 people.• keeping all the HSE aspects of the site on check with the help and support of an HSE specialist.• Rigging up and rigging down a complete full blown rig-less site for the following ops: Well head swap, well intervention, well fracking, e - line, TCP runs and most of the available well test in the market.• Saudi Aramco Work Authorization Permit receiver, able to open and close the wap formats for any job that need to be done on Location.

Udhailiyah, Arabia Saudita

• Coordinating all the logistic for the well service department: including personnel mobilization, professional evaluation, training of new hires into the well servicing practical duties and teaching the new hires from the frac crews into complementary well servicing ops like coiled tubing and e-line. Dealing daily with Aramco foreman’s and their managers in order to comply with their operational times and adapting to new contracts to specially maintain a high quality index in the overall fracking service. Locating through geographic coordinates the location of the new well making a detail moving plan for the site coordinating more than 70 moving trucks getting to the new location and assemble everything back again in less than 2 days and all the other 57 specific compliance points from Aramco• In Saudi Aramco gas well specifically in the SAWCOD area: Setting up choke manifolds, monitoring cabin, flare lines, flow meter and sampling points along the 3 inch well test line, diverters, de-sanders when need it, pre and post gun perforation, during and after fracking the well for flow back. That means preparing the lines to the south pit and west pit depending on the wind speed and direction and the frac sand coming out of the well• Coiled tubing well clean out, milling, cementing and tcp run into the well. Full onsite technical support for customers, Advising on the spot all the decisions that the coiled tubing operator takes alongside Saudi Aramco Foreman, to be able to prepare the field tickets after the job along with a complete and detail post job report• Site crews task assignments: As a site coordinator you take full responsibility of assigning all the tasks that every crew is doing every day. Preparing a training plan for special certifications. Creating a Filing system and maintain a record of all the tools and spare parts and equally important designing new system on the spot using what you hand available and doing it according to Saudi Aramco specifications

Several Locations

• Performing: Well testing (light oil, 2 geothermal wells, low H2S heavy oil wells), Cementing with Coiled tubing, clean out jobs mostly with Xylene and Diesel, inducing production well after gun perforating with nitrogen.• Preforming all Deep water cementing jobs for the CARDON IV offshore project working on the first 9 5/8 inch gas wells. Coordinating around 80 % of the logistic for the operations.• Aldo doing designs for well testing equipment layout using Microsoft Visio and modifying it on the field as the set-up of the equipments change as the operations goes on• Working as both engineer and supervisor when need it. • Evaluation of well tests using radial composite model and Dietz shape factor due to several acidification process that were taking place and uncertain skin damage due to lack of info from the drilling rig.• Sampling of well fluids for lab tests• Currently Supervising Crews of 12 people / Designing job programs FEKETE WELTEST software as well as well test 200 from Eclipse depending on the client requirements.• Preparing field tickets using a software FTL or filed ticket light property of slb. Taking to the client office for discussion with both the finance administrator in charge of sing it and several company mans who offer their opinion on the ticket charges.

Venezuela

• Field and Office work to ensure client needs are met or exceed by designing, implementing and supervising well test and coiled tubing jobs. Always using microsoft visio as a starting point for the well layouts.• Latest project was focused on reusing old and very fatigue CT pipe by using a setting tool (setting Packer) below the Christmas tree after activating the cutting rams to cut and hang the pipe to re inject gas from the producing wells to keep up with the field enhanced recovery plan for mature wells.• Discussing job programs with the client as well for keeping track of the tickets, not recognize revenue, tickets on hold, approve tickets with certain corrections, etc.• Biggest percentage of jobs goes to completion fluid changes, Roto jet and jetting tool deployment for calcium and other hard deposition derbis as well for thick and heavy asfaltene products by making several runs with the jetting tool in the BHA until the snubbing force reduce to a safe working level but even more important having returns in the surface.

Venezuela

• Well servicing by designing of Well testing and using saphir simulation software to input out relationship using both nearby producing wells and the well itself with the DST info and other pressure test (drawdown).• Adapting and implementing new technologies in recently drilled wells for future Enhanced Heavy oil recovery in the Orinoco oil belt by designing and cementing with slurries capable of resisting 1400°F for injection of High Temp Gas:1. This project used Custom made Fireset slurries design due to challenges with the wells being horizontals2. Special emphasis on Compressive straight values due to extreme compressive forces resulting from the gas moving at high velocity through perforations3. Using Latest Baker Hughes Laboratory technologies especially the newest curing vessels and cracking chambers

Venezuela

• Supervising field operations such as: Well testing for gas condensate fluids and running very thorough checklist for de sanders and any type of sand filter and separators installed in each well (take in consideration this was a mature oil field), well perforating procedures (TCP), well tree caps changes, electric wire line, production logging test (plt), dynamics and statics gradients and sample recovery for pvt studies.• Analysis of reservoir data for well test job programs using PanSystem.• Deign of TCP configuration for optimum reach of target in the selected wellbore intervals for the BOQ-24 well • Drilling engineering assistant in the Rig: JRGS at all stages of the drilling process carried out by Baker Hughes.Main Achievements:• Revision and verification of the consistency of all pvt analysis from Boquerón Oil field. That later would be use for design and re-scaling the Hysys process each well set of separators.• Predicting highly complex gas behavior in deep wells (20000 ft.)• Mathematic Optimization of the Orkizweiski vertical multiphasic flow for the determination of dynamics pressure gradients.• Appropriate selection of the vertical multiphasic flow correlation that best adapted to the specifics characteristics of each active productive well from Boquerón Oil Field (Limit date of this investigation: November of 2009).

I worked for the Petroleum Engineering Deparment at UDO:Field training sessions with Slchumberger at PDVSA wells and rigs mostly coiled tubing operations and production logging test.Also providing Students tutor and study sessions:-Basic and Advanced cumputer software classes.-Drilling fluids and solid stabilizers calculations.-Complete set of fluids mechanics behavior.-Industrial examples of heat transfer.

Field Engineer I (Cementing), Pressure Pumping, 4.0

Activities and Societies: Cemnting Pumping Units - See Hawk Well Servicing

Petroleum Engineer, Petroleum Engineering, 3.7/4.0

Activities and Societies: University Tutor: Heat transfer Thermodinamics Advanced Chemestry II English