Develop, Implement and Maintain an adequate process control, which guarantees stability and capacity to meet stability and capacity to comply with the technical specifications and customer requirements, through standardization and continuous requirements, through standardization and continuous improvement of work methods and procedures and the replacement or improvement of procedures and the replacement or improvement of equipment in the area of responsibility.Specifics Objectives:- Leading and coordinating the start-up of new facilities and other modifications, changes or improvements of the production process that are assigned to you, and their subsequent follow-up until the set objectives are achieved.- Creation and development of the Operating Rules (Specific Procedures and Work Instructions) on the machinery and/or production processes, instructing the factory staff in their handling and knowledge, thus ensuring the maintenance of the Know-How.- Analysis and study of new production processes, proposed by the Industrial Management.- Carrying out or managing the necessary tests of the process under study, in order to obtain the necessary data for the optimization of the process.- Execution and follow-up of the efficiency actions assigned in the different Committees in which you participate.- Participate in the definition and construction of the safety protections to be installed on new equipment, as well as in the improvement of the existing ones. - Keep up to date with the evolution of the different process methodologies, both technical and IT, through contacts with suppliers, Prysmian Group colleagues

General objective - Control on-site the correct execution of the work, ensuring that it is carried out in accordance with the technical and regulatory parameters, quality and deadlines agreed with Huawei-Claro in the Claro Liray Datacenter project- Quality Manager for Huawei like responsible for delivering project areas.

General Objetive:- Design, review, cost, control and coordinate the execution of implementation projects in the project area, complying with the standards and regulations of the industry, in order to ensure maximum safety, availability and future reliability of the installation and profitability of the business.Projects:- Installation of power supplies for Computer Room Air Conditioners (CRAC) of the air conditioning system. Data Center Edge Connex. - Ground resistivity study. CODELCO Pit Inca division El Salvador- Cubing of energy installations and structured cabling. Paris CENCOSUD Costanera Center- Cubing of electrical installations for lighting, power and air conditioning. Beauty Plus Costanera Center- Execution of preventive maintenance program of the energy backup system. Deloitte, WeWork. CBRE- Electrical installations of the New Production and Packaging area. vik vineyard- Gathering of information for electrical installations and structured cabling. Prime Capital- Electrical installations and communications. Altius Barrios Arana Project- Process Management for expansion of junctions, new electricity supply to Enel, CGE both industrial and residential

General Cargo Function- Provide the necessary tools for the certification process in HACCP standards with vision of BRC Packaging and ISO.Specific objectives- Identify the processes involved in the areas of production, logistics, and maintenance of the company- carry out studies of times and methods of the processes involved in the areas of production, logistics and maintenance- Elaboration of flow diagrams of the procedures carried out in the operational areas of the company- Propose process improvements, using Lean methodology, thus guaranteeing the continuous improvement of processes- Propose good manufacturing practices in the production process of the company- Proposal for planning the purchase of optimal supplies based on sales projections, in turn indicate a proposal for the distribution of storage for both raw materials and finished products.- Define the quality of the finished product for its production in conjunction with the management and operational sub-managements, to unify criteria of work in the production process- Drafting of standard operating procedures for the production, logistics and maintenance areas- Participate in technical meetings for the development of company projects to guarantee the organizational growth of the company

General Cargo Function- Provide technical support service to clients users of infusion equipment according to the corresponding standards and procedures to ensure quality and after-sales satisfaction and thus contribute to the growth of the line Infusion equipment, anaesthesia and clinical nutritionSpecific Objectives- install, maintain and repair infusion equipment in the technical service department.- Contribute to the preservation and shelf life of commercialized equipment- Check the correct dispatch of the equipment before being sent- Ensure that the product meets the requirements and expectations of customers according to area procedures and / or quality policies- Maintain and record the procedures corresponding to team movements- Ensure traceability of management complying with the quality system- Generate technical reports of field visits for internal clients.- Contribute to the traceability of the inventories that manage the business lines

- Assembly of energy backup systems for different project variety from 300VA to 150KVA. - Review, repairs and commissioning of critical energy equipment (Rectifiers, inverters, battery chargers) - Installation and commissioning of equipment in the field - Review, analysis and interpretation of electrical drawings - Perform electrical work of operation and maintenance UPS, rectifiers and battery banks of different brands (General Electric, Riello, Kstar, Atek, SBS and HindlePower) -

- Perform procedures. charge and recovery of batteries.- Installation and commissioning of battery bank and UPS's.- Manual handling of loads, transport and transfer of equipment and tools.- Measurement and testing of equipment. (batteries, UPS's).- Firmware update of different types of UPS's.- Perform FAT tests to equipment.- Perform preventive maintenance to UPS's, rectifiers and battery banks.- Provide support in the inherent activities of the energy support sub-management.

- Responsible for the development of Solidity smart contracts.- Create tests to accompany produced code.- Write code with security and resiliency in mind.- Contribute to and work within Agile and DevOps frameworks.- Work in partnership with Web Services and User Interface developers.- Develop in alignment with overall architecture design.- Assist in incident and problem resolution as appropriate.

General Cargo Function- Perform supervision tasks in operational areas related to General Electric lm2500 + and lm6000 sprint aeroderivative turbines.- Supervise and direct the work of shift operators, auxiliary operators. Also exercise considerable independent judgment to adapt and apply the guidelines to specific situations as necessary.Specific functions:- Supervise the work of control room operators and others assigned to a shift in the operation of turbines, generators, motors and other plant equipment.- Operate turbine-generator units and auxiliary equipment necessary to generate load requirements.- Check that all employees are taking readings and doing the assigned work.- Perform periodic inspections of the equipment to see that it is working correctly.- Issue authorizations for all equipment that is outside for repair.- Perform performance evaluations and recommend approval or disapproval of merit increases.- Evaluate and verify the performance of employees through the review of tasks and work techniques completed.- Monitor the status of all security systems such as fire protection and compliance with safety regulations.- Coordinate activities by scheduling work assignments, establishing priorities and directing the work of subordinate employees.- Identify the development and training needs of the staff and ensure that the training is obtained.- Ensure that proper working relationships and employment conditions are maintained.- Check the daily records to determine the correct operation of the equipment.- Inspect the finished work on maintenance activities- Indicate to the shift operators the changes in the turbine and / or electricity generation operations.- Prepare daily and monthly reports on the operation of the plant, the use of energy.- Supervises the training of console operators and auxiliary operators.- May occasionally perform any task assigned.

General Cargo Function- Control and monitoring of the execution of corrective and preventive maintenance ofmachines and equipment, as well as support for the management of the technicalmanagerSpecific functions:- Control and monitoring of scheduled activities for preventive maintenance, as well astimely inform the manager to take required actions- Analysis of failures of machines and equipment presented for the definition ofcorrective and / or preventive actions by the technical manager- Ensure compliance with scheduled preventive maintenance for plant machinery andequipment- Review together with the technical manager of the inventories of spare parts andsupplies required for the execution of the programmed preventive maintenanceprogram- Issuance, review and adjustments together with the technical manager of the workorders required for the execution of the maintenance activities of machines andequipment- Be attentive to assist and give technical support to the technicians and all thepersonnel of the company that requires it- Support in carrying out tests on the projects that have been programmed, to certifytheir operation and guarantee their reliability- Support in the issuance and analysis of management's management indicators

Functions:- Respect and enforce the safety notices that are within their work areas.- Advise in the development of safe work procedures.- Advise staff on preventive measures to be considered in the execution of activities, tominimize the risks associated with it, as well as in the use of personal protectionequipment.- Elaboration and disclosure and participation of the contingency plan for anyemergency case.- Dictate the previous talks to all the personnel involved.- Preconditioning of work sites, so that the evacuation and escape routes remain free ofobstacles.- Verify the availability and functionality of the ambulance and the paramedic.- Responsible for the requisition of the work in SIAHO matter.- Verify the availability, equipment and functionality of the ambulance.- Supervise the tasks of the paramedic his rondines by the areas and the reports of hismanagement for the dossier.- Notify the deviations found, issue the recommendations and establish responsible anddate of correction.