Radu D. Email & Phone Number

Wiener Neustadt, At

Austria

Whitley, United Kingdom

Powertrain Manufacturing EngineeringManage all quality and training related issues within the PTO team.Identify root cause and instigate permanent corrective actions for product quality issues.Work with internal and external stakeholders to resolve quality issues that arise as quickly and efficiently as possible to prevent compromising quality and safety standards.Carry out product and process auditing.Ensure control plans and associated documentation are implemented effectively and maintained.Ensure compliance and assist with adherence to the Quality Management system (TS16949/ISO9001).Undertake special projects as required.Assist with training of quality awareness.Report on Key Performance Indicators (KPIs) in order to adhere to process and prevent occurrence of any non-conformity relating to product, process or system.Assist with first off sample approvals.Promote the use of customer preferred techniques for continuous improvement such as Six-Sigma, Poka-Yoke (Error Proofing), and Measurement System Analysis.Participate in cross-functional teams in the development of new products or changes related to current products in meeting customer requirements.Participate in the development and refinement of Design and Process FMEA’s (Failure Mode and Effects Analysis).Lead quality audits.Keep up with current and developing manufacturing and engineering trends that concern product quality.Contribute to continuous improvement activities.Quality control of work by appropriate reviews.Support and lead process improvement activities.Write reports and present progress at project meetings.Achieve goals within budget.Conduct benchmarking studies to determine best practices/designs and future trends.Attend various meetings and action/communicate instructions.Produce written reports and make presentations.Undertake continuous training and development.Perform root cause analysis and resolve problems.Independently determine approach and assigned tasks.

Abu Dhabi - Uae

• Responsible for Quality, Environmental, Health and Safety.• Responsible with ISO 9001, ISO 14001 and OHSAS 18001 standard implementation and maintaining.• Obtaining recertification for ISO 9001:2015 and 14001:2015 standards.• Coordinate the connection with external parties in matters related to the quality management system (QMS) and to the quality of the services.• Responsible with organizing and leading the training activities for the personnel in all the work sites• Define the objectives and targets for employees and perform the annual assessment of the performances and, also, monthly and annual assessment of KPI’s.

Slatina, Romania

• Responsible for Quality, Environmental, Health and Safety.• Responsible with 8D reports, 5S, FMEA process.• Defined Quality objectives and managed CIP activities across the organization• Managing claims from the market• Technical support assistance and training for sales force and dealers• Liaise with the external assessment body on all matters related to the external accreditation process (ISO 9001, ISO 14001, OHSAS 18001, ISO TS 16949:2009)• Responsible with the finished products inspection according to BS EN 755-3 and 755-4:2008Key achievements: decrease the scrap percentage from 15% to 2.5-3%

United Kingdom

Project Manager - Quality Inspection subcontractor Romtesting NDT for the projects Hereema Marine Contractors (10.2013 – 02.2014) and Arla Foods, Aylesbury (01.2013 – 09.2013), U.K.• Visual inspection – welding, according to ISO 3834-1 (2; 3; 4):2005 • Ensure that the Required Visual tests and Inspection of welds and pipes are performed in compliance with customer’s Specification and Procedures. • Ensure the NDT equipment calibration and maintenance is planned, performed and recorded. • Establish and maintain accurate records of tests and inspections Support Corrective and Preventive Actions and the experience response, where required. • Analyze test results and concise technical routine and non-routine reports. Make accept/reject decisions based on results and customer requirements. • Analyze and interpret NDT requirements related to steel, aluminum, magnesium, titanium, and other alloys. Conduct investigations on product issues and suggest solutions based upon the results of findings using the latest technology in visual inspection for stainless steel welds (food production in Arla’s case). • Provide technical support to other departments on issues concerning materials and processes, including advice on potential hazards and impact of chemical and processes to health and safety of all employees.

Slatina, Romania

• Treating claims from the market – Balkan Area (Romania, Bulgaria, Albania), product evaluation in the market (our products and competition) – same area, internal product audit, out-going quality, technical assistance and training for employees (especially for commercial department) and customers, dealers, warehouse management.• Technical analysis and expertise for products involved in accidents• Technical and product trainings for dealers and end users, technical support and assistance for sales force• Audit for new finished product in the warehouse and tyres tests• Responsible for Quality, Environmental, Health and Safety.• Coordinating the activity of technical expertise workshop for claims solving.• Auditing factories and suppliers and liaised with all internal departments (ISO 9001, ISO 14001, OHSAS 18001, ISO TS 16949:1999)Key achievements: decrease the response time for claims from more than 90 days up to 5 days Reduce the plant’s internal scrap from 10-12% to 2.3-2.5%

Bucharest, Romania

• Analysis and technical expertise for claimed products for Balkan Area (Romania, Bulgaria, Albania and former Yugoslavia)• Responsible with homologation files and with obtaining homologation for the new products• Analysis and technical expertise for products involved in accidents- reports, synthesis regarding product usage in different usages• Product training for dealers and end users and technical support assurance for entire sales force and supervising the activity of expertise/decision workshop for claimed products

Craiova, Romania

• Coordinating the new project for the new lines installation in Body Paint Shop and Parts Paint Shop.• Design the operation standard sheets for paint shop processes. • Ensure that the QMS processes needed are established, implemented and maintained• Responsible with field claims warranty for electrical installation and car body and accessories• Member of the team that implemented ISO 9000:1994 and ISO TS 16949:1999 standards.• Member of evaluation and audit committee for dealersKey achievements: implementing the new SOPs, in compliance with ISO requirements.

Craiova Romania

Electrician for medium and high tension electrical engines used in railway industry

Engineer, Electromecanics

Industrial Electromechanics

Matematics And Phisics, Baccalaureate

Mathematics - physics