Rahul Kumar Email & Phone Number

Karachi, Pk

Uzbekistan

Jhimpir Noriabad Sindh Pakistan

Karachi, Sindh, Pakistan

Installation of Siemens Gamesa G114 2.0MW 2.0x Wind Turbine: • Inspect and ensure quality of all Wind Turbine Equipment while offloading (QA/QC). • Confirms Calibration Certifications of all WTG tools, also inspect lifting tools for all Wind Turbine Components.• If Tower, Nacelle, Hub and Blade (TE & LE) side paint damaged is observed than its repairs works is arranged.• Ensuring the foundation level measurement as per OEM procedure before installing base section.• Ensuring the cleanliness of anchor bolts and anchor plate to be free of rust.• Ensure to place of RMU and control cabinets on foundation as per measurements before placing base section.• Inspect the NACELLE and HUB carefully to find any abnormal condition like any part damage/missing.• Inspect Blades carefully to ensure the quality, as it is the only all-time supportive rotating part of the WTG.• Erection of turbine components according to SGRE manual and safety protocol.• Bolt Torque inspection with 10% and 100%.➢ Follow and verify:✓ Installation check list (ICL).✓ Cable installation check list (CICL).✓ Generator Alignments.✓ Gearbox Arms Adjustments.✓ Electric inspection included Insulationresistance (IR).✓ Installation inspection procedure (IIP).✓ Mechanical Completion certificates (MCC) (both Pre-inspection and Final-inspection is performed in MCC). Projects (All are 300MW):1. Master Green Wind Energy Project 50MW2. Tricom Wind Energy Project 50MW3. Lakeside Wind Energy Project 50MW4. Liberty-1 Wind Energy Project 50MW5. DIN Wind Energy Project 50MW6. NASDA Wind Energy Project 50MW. ➢ Commissioning of Wind Turbine:✓ Inspection of all Electrical cabinets.✓ Electrical connection.✓ Downloading & Installation of all softwares.✓ Calibrations of blades and sensors.✓ Troubleshooting of system.✓ Testing of wind turbines system.➢ Troubleshooting is performed with use of electrical/mechanical drawings, schematics and location circuit plans.

Karāchi, Sindh, Pakistan

• 2 year plus hands on GE Wind Turbines experience total countable experience is 3 years.• Assistant Site Lead handles all the works of site leads in their absence.• Complete all the works of client, like maintenance service reports and so on.• Best working experience of GE Wind Turbine Controller Mark VIe and GE WINDSCADA V11.0 SP8.1. • Troubleshoot faults using ToolBoxST-7.04, using Turbine Controller Mark VIe. • Performs overall maintenance work on both GE Wind Turbines (1.6 & 1.7) MW, like BIM, Semi Annual Maintenance, Annual Maintenance.• Excellent knowledge of operating ToolBoxST 7.04 software to troubleshoot fault through, logic diagram, block diagram, or by adding trend of exact parameters to verify the fault.• Keep focus on pulse point anomalies that are being flagged and properly work on them before facing any critical problem of tripping or shutdown due to some exceed values.• Best at GE Wind Turbine’s IGBTs Line/Rotor side, Yaw Control System, Pitching Control System, ALC system, CMS System, Gear Box, Rotor, Generator control, Electrical motor troubleshooting to megger the winding/wire, and electrical components like contactor, breakers and fuses.• Best at Industrial drawings, Schematic Diagram to troubleshoot electrical faults.➢ Worked at these Plants:• Tricon Boston Wind Energy Power Plant 150MW• Sapphire Wind Energy Power Plant 50MW• JPL Wind Energy Power Plant 50MW• HAWA Wind Energy Power Plant 50MW• HAE Wind Energy Power Plant 50MW• Master Wind Energy Power Plant 50MW• Tenaga Wind Energy Power Plant 50MW

150Mw Wind Enenrgy Power Plant Jhimpir Sindh, Pakistan

• 2 year plus hands on GE Wind Turbines experience total countable experience is 3 years.• Assistant Site Lead handles all the works of site leads in their absence.• Complete all the works of client, like maintenance service reports and so on.• Best working experience of GE Wind Turbine Controller Mark VIe and GE WINDSCADA V11.0 SP8.1. • Troubleshoot faults using ToolBoxST-7.04, using Turbine Controller Mark VIe. • Performs overall maintenance work on both GE Wind Turbines (1.6 & 1.7) MW, like BIM, Semi Annual Maintenance, Annual Maintenance.• Excellent knowledge of operating ToolBoxST 7.04 software to troubleshoot fault through, logic diagram, block diagram, or by adding trend of exact parameters to verify the fault.• Keep focus on pulse point anomalies that are being flagged and properly work on them before facing any critical problem of tripping or shutdown due to some exceed values.• Best at GE Wind Turbine’s IGBTs Line/Rotor side, Yaw Control System, Pitching Control System, ALC system, CMS System, Gear Box, Rotor, Generator control, Electrical motor troubleshooting to megger the winding/wire, and electrical components like contactor, breakers and fuses.• Best at Industrial drawings, Schematic Diagram to troubleshoot electrical faults.➢ Worked at these Plants:• Tricon Boston Wind Energy Power Plant 150MW• Sapphire Wind Energy Power Plant 50MW• JPL Wind Energy Power Plant 50MW• HAWA Wind Energy Power Plant 50MW• HAE Wind Energy Power Plant 50MW• Master Wind Energy Power Plant 50MW• Tenaga Wind Energy Power Plant 50MW

Dha Phase Ii Ext, Back Street Of Kfc Ittehad Karachi

Calibrate/verify every component related to the industrial use like:• Pressure/ Temperature Gauge• Pressure/Temp Transmitter• Level Gauge/ Trolls• Pressure/Temp Controller• Pressure/Temp Control Valve• Flow Transmitter/Controller• Level Transmitter• Flow IndicatorWorked in these Industries to calibrate overall equipment of the industry• Futehally Chemicals (Pvt.) Ltd.• Pharmatec Pakistan (Pvt.) Ltd.• Searle Pharmaceuticals Pakistan Ltd.• Nabiqasim Industries (Pvt.) Ltd.• Pakistan Dairy Products (Pvt.) Ltd (IGLOO)• Asian Continental (Pvt.) Ltd.• Hudson Pharma (Pvt.) Ltd.• METIER PLASTIC (PVT.) LIMITED.• Asia Petroleum Limited.• Linz Pharmaceuticals (Pvt) Ltd. Responsibilities:• The work is to check every component’s reading and calibrate it, if there is any error• Verify it and attach tag on to the component and give surety for whole year• Keeps direct contact with clients for any inquiry/inspection/issue/updates or for any service• Inspection of the Certificate issued to clients• Makes schedule according to the work• Oversees the work record on daily basis

Main Shahrah-E-Faisal, Near Baloch Pull Karachi

Worked in a team at Mianoor Textile Industries karachi to maintain the Textile Machinery and Programmed Siemens PLC using SIMATIC Manager step 7.

Sc-38 Amna Square, Chandani Chock, Karachi

Worked there as a agent to deal customers to use our products like direcTV, Home Phone, and Internet, worked under TELUS Network authority that work for USA. It was just a part time job from 7 pm to 11 pm.

Karachi Sindh Pakistan

I have worked on FATAK and Siemens PLCs S7 300/400, and I can program both PLCs, also worked on these Switches, Relays, Contactors, Circuit breakers, VFDs (Variable Frequency Drives), worked on Forward and reverse Starting of AC-motor through PLCs and VFDs, Multiple sensor like Actuators, Temperature sensors (RTDs, Thermocouple, Thermistor), Pressure sensors, Load cell, Interfacing of HMI with PLCs, PID Techniques to understand how it works. And deep Understanding of Industrial drawings to troubleshoot electrical faults.I worked using WINPRO Ladder and Siemens Manager for PLCs programming, and Utility Manager for the HMI.

Karachi Sindh, Pakistan

Got the best experience from this course to interface various components like interfacing Android application with Arduino board, and worked on many devices like sensors, motors, and LCD, also worked on modules GSM, WiFi, Bluetooth, ZigBee, GPS modules and could use GSM and GPS together to track.

Kaachi, Sindh Pakistan

I worked under the CEO of Airlines and he taught me everything about Airplanes, what to do in emergency? why these emergency cases happens? who is responsible in this situation ? everything about airplanes and, I was sent to Airplane repairing center for 1 week and than I was sent to Avionics Laboratories where we worked on different parts of the airplanes line working on the controlling side they told about overall about Cockpit system where pilot sits and control whole Airplane, worked on internal parts of the Airplane like APU (Auxiliary power unit). Got the best experience form PIA Engineering & Maintenance Karachi during internship.

Bachelor, Electronics, Cgpa 3.62/4

Intermediate, Pre-Engineering, B

Matriculation, Science, A

Passed Matriculation with 'A' grade.