Rajesh Patnaik Email & Phone Number

Mumbai, Maharashtra, India

Job Role and Responsibility – 1. Provide guidance and oversight to ensure compliance to all applicable Amazon Safety Policies. 2. Measure sites’ performance against published requirements in safety policies. For all deficiencies, identify a plan for the site to implement and fix all identified deficiencies. 3. Deliver on-time and quality projects to Operations. 4. Analyze safety metrics and review incident weekly and monthly incident trends to discover trends to justify the allocation of appropriate resources to areas where the safety risk is highest. 5. Perform frequent site safety audits to identify all non-compliance equipment and/or processes at the site. 6. Implement solutions to eliminate exposure to these risks and prevent injury at other FCs. 7. Audit recordkeeping practices and Global Safety Database entries to ensure compliance to global safety standards and local regulations. 8. Audit the workplace organization and Associate behaviors to ensure that training, auditing and scoring methods are accurate and consistent. 9. Manage and mentor Safety Associates in your assigned FC. 10. Spend time at the fulfilment centers and seek input from Safety teams, Associates and leaders on safety program improvement opportunities. 11. Ensure open communication on status of progress and resolution against these suggestions. 12. Ensure site leadership and Associates are trained and knowledgeable of their responsibilities under each policy. Audit the quality, delivery (including qualifications of the trainer), and effectiveness of all required safety training.

Jharsuguda, Odisha, India

Working in Godrej & Boyce Mfg. Co. Ltd. as EHS Officer.Type of Work : Forklift Operation & Maintenance (Plant - 1 & 2)Job Roles & Responsibilities -1. Ensure completion of task based Safe Maintenance Procedure (SMP) & Safe Operatingprocedure (SOP) & Hazard Identification Risk Assessment & Determining Controls(HIRADEC) prior to working activities inside plant premises.2. Ensure all working Activities are being performed under a valid Permit to Work (PTW) System.3. Ensure Strict HSE compliance during all high-risk activities (Vehicle Movement, liftingOperation, Lockout Tagout, Working at Height, Machine Safety, Electrical Work, etc.)4. Develop HSE Training Plan and deliver HSE Trainings.5. Ensure all site personnel are trained in job specific training.6. Develop and deliver site HSE Induction program for new workers.7. Plan and conduct routine site HSE Inspections, record and analyse observations.8. Prepare and submit weekly & monthly HSE reports, check list report and HSE daily observations track sheet of unsafe act & condition & project HSE dashboards.9. Implement Contractor Safety management program at project site.10. Prepare, implement and maintain Site Emergency plan and site access control process.11. Ensure all HSE incidents & Near Misses are reported, investigated and analyse to preventreoccurrence.12. Intervene whenever site activities do not meet the established HSE requirements and stop any activity whenever there is an immediate hazard or risk for serious injury.13. Ensure sufficient inventory for safety equipment including PPEs for project personnel.14. Participate in developing and promoting on- or off-job safety educational program to address safety issues and concerns.

Al Jubayl, Saudi Arabia

Worked in Al Yusr Industrial Contracting Co. (AYTB) as EHS Officer.Client - Saudi Kayan (SABIC)Location - Saudi Kayan, Jubail, Saudi Arabia.Industry - Oil and Gas.Maintenance - Petrochemical.Project Type - Maintenance.Shutdown : Saudi Kayan (SABIC) - PHENOLICPHENOL - CUMENE - BPA

Al Jubayl, Saudi Arabia

Worked in Al Yusr Industrial Contracting Co. (AYTB) as EHS Officer.Client - SADARA Chemical CompanyLocation - SADARA MOC, Jubail, Saudi Arabia.Industry - Oil and Gas.Maintenance - Petrochemical.Project Type - Maintenance.Shutdown : SADARA PLASTICSADARA MOC (PROJECT)SADARA ZECCO (Greenfield) - Multi point ground flare (MPGF)

Jubail Industrial City, Eastern, Saudi Arabia

Worked in Al Yusr Industrial Contracting Co. (AYTB) as EHS Officer.Client - PetroRabigh (ARAMCO Joint venture)Location - PetroRabigh, Mekkah, Saudi Arabia.Industry - Oil and Gas.Maintenance - Petrochemical.Project Type - Maintenance.Shutdown : PRC Phase II - NAPHTHA - PHENOL - CUMENE Job Roles & Responsibility -1. Conducting safety walk-through with Management Team.2. Coordinate with the team for submission of safety deliverable.3. Trains employees in safety procedures.4. Conduct safety inspections and convey hazard to concern department.5. Conduct audits and inspect operational procedures.6. Conduct safety meetings and review safety conditions and general safety policies.7. Rectify work site conditions, which are liable to cause or have caused accidents.8. Undertake the investigation of accidents, incidents or near misses to determine the underlying root causes.9. Report in detail to the Manager and complete the required report forms in a timely basis.10. Review daily observations of safety activities.11. Oversees the use of dangerous chemicals and machinery.12. Writes up reports detailing the inspection process.13. Stays up to date on health and safety regulations.14. Carryout testing of Fire Extinguisher / Fire Booth to check its effectiveness.15. Monitor emergency drills to gauge employee readiness.16. Consults with the company manager regarding the implementation of new safety procedures.

Hyderabad, Telangana, India

Worked in Megha Engineering and Infrastructure. Ltd.(MEIL) as EHS Engineer. Project Name - GHMC-CRMP-KHAIRATABAD ZONE - II (BROWN BELT - ROAD PROJECT) Project Type - Road Construction Location - Hyderabad, India

Hyderabad, Telangana, India

Worked in Megha Engineering and Infrastructure. Ltd.(MEIL) as EHS Engineer. Project Name - Palamuru - Rangareddy lift irrigation project (Tunnel) PRLIS-PKG-5 (NATM- Tunnel) Project Type - Tunnel Construction Location - Hyderabad, IndiaJob Roles and Responsibilities -1. Conducting health and safety planning meeting with Execution Team and participating in weekly safety walkthrough with Management Team.2. Conducting safety committee meeting and preparing minute proceedings for circulation and follow-up action.3. Implementing and enforcing the compliance of HSE policy, project HSE plan &procedures to meet client HSE expectations and requirements.4. Investigating accidents/near-misses to discover causes and preparing reports on the basis ofavailable facts, tracking incident metrics and applying findings.5. Adhering to compliances of all statutory requirements and safety guidelines.6. Conducting trainings, tool-box talks, induction and presentations for health and safety matters and accident prevention.7. Preparing monthly HSE report, check list report and HSE daily observations track sheet of unsafe act & condition.8. Allotting work Permit and closing work permit, conducting emergency mock drills.Managing safety functions and events at Plant.9. Reviewing the authorization and certifications of operators and lifting equipment.10. Ensuring records systems are maintained in accordance with generally accepted standards.11. Keeping a check on emergency preparedness and hazard identification and risk assessment (HIRA).12. Directing timely medical check-up of all employees as per planning.13. Ensuring that all firefighting equipment's are at proper place their maintenance is carried outtimely and are ever in proper working.14. Conducting internal safety audit at periodical interval and make audit report.15. Carryout safety inspection of work area, machine and other tool and other tackles to observe possible unsafe conditions.

Jharsuguda, Odisha, India

Worked in Aditya Birla UltraTech Cement Ltd. (JCW) as Mechanical Maintenance Engineer.Type of Work : Maintenance (Plant - 1 & 2)Maintenance - Wagon Tippler Area, Silo, Conveyer Belt, Ball Mill, Media Charging, Shaft Alignment. Job Roles & Responsibilities - 1. Carry out breakdown analysis & minimization of breakdown.2. Plan & implement short-term, long-term maintenance & unit overhaul as per schedule.3. Regular updating & preservation of maintenance record.4. Managing of the mechanical manpower of the area & assigning specific responsibilities according to their experiences and skills.5. Maintain & repair mechanical equipment (SHAFT ALINGMENTS, SILO, CONVEYOR BELTS, BALL MILL, MEDIA CHARGING, AMOUND BUCKET, etc.)6. Give day to day technical support for breakdown diagnostics & repair.7. Improve & update the maintenance (Preventive & predictive) program regularly.8. Identify, update continually improve equipment reliability.9. Maintain equipment history records, reports, and proper Documentation.10. Identify select and update the required spare part.11. Maintenance and Over look of Wagon tippler area.12. Alignment of pump and motor.13. Fabrication and formation of New Safety Elevated platforms and structure where ever required as per client requirement.14. Conducting internal audit with the Safety Department for the project.

Vishakhapatnam, Andhra Pradesh, India

Worked as Engineering Trainee (Mechanical Engineer) in 1. Roll Shop & Repair Shop (CNC Programming) 2. Wire Rod Mill (WRM)3. Billet Casting

International General Certificate, Occupational Health And Safety, 69 [Credit]

Post Diploma In Industrial Safety (Pdis), Industrial Safety Technology, 86.8%

Activities and Societies: Training on Safety Health and Environment Awareness in Industries from Regional Labor Institute (RLI), Kolkata

Bachelor Of Technology - B.Tech, Mechanical Engineering, 7.4 [Cgpa]

Intermediate (Class - 11 & 12), Science, 64.3

Sslc (Class 10), Science