Please complete the CAPTCHA to continue
A concise factual answer block for searchers comparing this professional profile.
Rayner Cantos is listed as Licensed Aircraft Maintenance Mechanic at Jazz Aviation LP, a company with 2322 employees, based in Montréal-Ouest, Quebec, Canada. AeroLeads shows a matched LinkedIn profile for Rayner Cantos.
Rayner Cantos previously worked as Aircraft Mechanic (Line Maintenance) at Jazz Aviation Lp and Electric Assembler at Cae Healthcare. Rayner Cantos holds Dep, Cable And Circuit Assembly from École Des Métiers De L’Aérospatiale De Montréal.
This section adds company-level context without repeating Rayner Cantos's masked contact details.
Review company-level records connected to Rayner Cantos before choosing the right outreach path.
• 11+ years of experience in the aviation industry• M2 licensed aircraft mechanic• CRJ 705/900 endorsed• Dash 8 Q-400 endorsed• Experienced in the aviation manufacturing industry:° Pre-flight mechanic° Bench Electric Assembler° Avionics System Installer
Listed skills include Aviation, Aerospace, Aircraft Maintenance, Aircraft Electrical Assembler, and 1 others.
Company context helps verify the profile and gives searchers a useful next step.
A career timeline built from the work history available for this profile.
Montreal, Canada Area
Carry out daily service and line checks (general maintenance ie. check lights, brakes, oil), A checks, summer/winter health task cards, troubleshoot faulty systems, remove and replace components, and carry out operational tests.
Montreal, Quebec, Canada
I started working on the fabrication of cables, harnesses, assorted valves, fans and LED light strips for the CAEAir1 ventilators. Then I worked on the final assembly department; assembling the ventilator unit from the ground up.I worked in another department where modifications needed to be carried out through the manufacturing process. This included.
500 Côte-Vertu Ouest, Montréal, Qc, Canada
Installing R/H aft fuselage electrical harness on Bombardier Challenger aircraft, terminating cables, assembling connectors, installing units, antennas, motor control units, working on elevated platforms/lifts at hazardous heights wearing proper safety harness and equipment.
Montreal, Canada Area
Fabricate cables and harnesses in accordance to technical drawings, documents and standards. (Measuring, cutting, stripping wires/cables, crimping contacts, splices, lugs, soldering resistors and diodes)
500, Chemin Côte Vertu Ouest
Fabricate electrical harness (in the Research and Development department for the Global 7000/8000) in accordance to the technical documents and specifications. Prepared kits (connectors, contacts, solder sleeves, wires, cables) to fabricate electrical harnesses.
200, Chemin Côte Vertu Ouest, Montréal, Qc, Canada
Installed aircraft components (for the Global 5000/6000) in accordance with the AMM. Preserved and unpreserved the engines after long term parking. Daily and weekly inspections. Verified tire pressure. Carried out pre-flight and post-flight inspections. Fueled and defueled aircraft. Carried out weight and balance. Did functional tests of primary flight.
595 Stuart Graham, Montréal, Qc, Canada
Installation of electrical harnesses for the fabrication of the Global 5000/6000 aircraft. Routed wires and cables to their designated locations in regards to the drawing. Secured cables and connectors with tyraps, brackets and spiral wrap to avoid friction to adjacent structures.
Other employees you can reach at flyjazz.ca. View company contacts for 2322 employees →
David Obrien
Colleague at Jazz Aviation LpCanada, Canada
View →
RB
Ryan Brisson
Colleague at Jazz Aviation LpOntario, Canada, Canada
View →
DP
Daniel Pfeif
Colleague at Jazz Aviation LpCornwall, Ontario, Canada, Canada
View →
KV
Krish Venky
Colleague at Jazz Aviation LpCanada, Canada
View →
HI
Heidi Itzke
Colleague at Jazz Aviation LpBurnaby, British Columbia, Canada, Canada
View →
BW
Bill Whalen
Colleague at Jazz Aviation LpMississauga, Ontario, Canada, Canada
View →
MG
Marco Giovanoli
Colleague at Jazz Aviation LpCalgary, Alberta, Canada, Canada
View →
EJ
Emily Joudrey
Colleague at Jazz Aviation LpOshawa, Ontario, Canada, Canada
View →
SC
Sandra Cameron
Colleague at Jazz Aviation LpCanada, Canada
View →
KA
Kali Arthurs
Colleague at Jazz Aviation LpBeaver Bank, Nova Scotia, Canada, Canada
View →
Learned how to fabricate, install, connect, and verify electrical harnesses. We check the wires and cables to ensure the quality of the.
An aircraft maintenance engineer (AME) is a person who is Transport Canada licensed to sign the maintenance release for certified aircraft.
To fabricate, install and adjust structures of an aircraft. Learned how to work with sheet metal and composite material. Use pneumatic.
Quick answers generated from the profile data available on this page.
Rayner Cantos works for Jazz Aviation LP.
Rayner Cantos is listed as Licensed Aircraft Maintenance Mechanic at Jazz Aviation LP.
Rayner Cantos is based in Montréal-Ouest, Quebec, Canada while working with Jazz Aviation LP.
Rayner Cantos has worked for Jazz Aviation Lp, Cae Healthcare, Bombardier Aerospace, Cae, and Cfg Bombardier.
Rayner Cantos's colleagues at Jazz Aviation LP include David Obrien, Ryan Brisson, Daniel Pfeif, Krish Venky, and Heidi Itzke.
You can use AeroLeads to view verified contact signals for Rayner Cantos at Jazz Aviation LP, including work email, phone, and LinkedIn data when available.
Rayner Cantos holds Dep, Cable And Circuit Assembly from École Des Métiers De L’Aérospatiale De Montréal.
Rayner Cantos is listed with skills including Aviation, Aerospace, Aircraft Maintenance, Aircraft Electrical Assembler, and Continuous Improvement.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial Search contactsCheck these profiles if this is not the Rayner Cantos you were looking for.
