• Responsible for engineering assessments of Vale mining projects worldwide, in automation, instrumentation and electrical disciplines, using the FEL methodology, national and international standards and the Vale standardization system.• Engineering assessments of automation systems (safety instrumented system (SIS), supervision of the instrumentation and control system, installations in explosive atmospheres, barrier integrity management, alarm and by-pass management) and electrical… Show more • Responsible for engineering assessments of Vale mining projects worldwide, in automation, instrumentation and electrical disciplines, using the FEL methodology, national and international standards and the Vale standardization system.• Engineering assessments of automation systems (safety instrumented system (SIS), supervision of the instrumentation and control system, installations in explosive atmospheres, barrier integrity management, alarm and by-pass management) and electrical engineering assessments (transformers power, SPDA, protection and power systems, incident energy, grounding, distribution and transmission networks and substations).• Participation in kick-off meetings and project alignment with Brazilian and international clients (Canada, Indonesia, Australia, Oman, Japan);• Assessment of Hazop, Bowtie and Risk Analysis studies;• Field technical visits to assess installations and projects, design and analyze trade-offs.• Evaluation of technical documentation, preparation of specifications and technical guidelines. Show less

• Working for Cepemar Group under the Petrobras contract, responsible for Continuous Improvement strategies in the Maintenance of Marlim Sul and for ensuring the compliance of units with legal requirements for platforms P38, P40, P51, P53, and P56. • Professional qualified by NR37 of MLS and Technical Responsible (PH) of the unit's equipment and systems; • Analysis of the operation and maintenance routines, of the installed equipment to verify gaps in compliance with the NRs; •… Show more • Working for Cepemar Group under the Petrobras contract, responsible for Continuous Improvement strategies in the Maintenance of Marlim Sul and for ensuring the compliance of units with legal requirements for platforms P38, P40, P51, P53, and P56. • Professional qualified by NR37 of MLS and Technical Responsible (PH) of the unit's equipment and systems; • Analysis of the operation and maintenance routines, of the installed equipment to verify gaps in compliance with the NRs; • Implementation of actions to adapt to current NRs; • Review of maintenance plans focused on reducing costs and increasing systems reliability; • Analysis of the execution of preventive maintenance work orders in the MLS asset production units; • Provide a technical opinion on the operational continuity of equipment when the activities provided for in the current maintenance plans are not fully performed; • OM backlog treatment of services registered in CCMS SAP; • Mapping and implementation of blocking actions that minimize the risk of recurrence of planning deviations and/or execution of preventive maintenance; • Conducting analysis of equipment failures and implementing blocking actions; • Responsible for the management and reporting of ongoing actions, ensuring that the deadlines agreed between the contractor and the contractor are met; • Adequacy of technical lists of equipment and spare parts in CCMS SAP; • Insertion of information regarding equipment and spare parts (Manuals, Data Sheets, Operating Parameter Data, Serial Number, Criticality Class, etc). Show less

• Acting in Vale's project engineering at CPBS (Sepetiba Port), TIG (Guaíba Island), developing CAPEX and OPEX projects;• Development of technical scope for hiring companies to prepare executive projects;• Responsible for the inspection and implementation of strategic plans for adequacy of electrical installations according to NR10.• Responsible for inspections of classified areas, according to NBR IEC 60079, performing visual, detailed and accurate inspections.

• Acting in central maintenance, serving the entire plant (melt shop, blast furnace, coke oven, boiler, power plant, co-products, WTP, sintering, courtyard material, port) in its maintenance and major maintenance stops;• Responsible for managing a team of professionals, including technicians, instrumentalists and electricians, applying training, feedbacks, performance evaluation and promotion according to performance;• Responsible for managing the KPI's for maintenance, cost and… Show more • Acting in central maintenance, serving the entire plant (melt shop, blast furnace, coke oven, boiler, power plant, co-products, WTP, sintering, courtyard material, port) in its maintenance and major maintenance stops;• Responsible for managing a team of professionals, including technicians, instrumentalists and electricians, applying training, feedbacks, performance evaluation and promotion according to performance;• Responsible for managing the KPI's for maintenance, cost and compliance with internal security procedures;• Conducting an interface between inspection x programming x execution processes;• Conducting failure analyzes, developing action plans and handling failures;• Control of overtime and absenteeism;• Implementation of DTM in the areas to improve maintenance plans.• Responsible for the energy efficiency project with an annual reduction in energy consumption (9.031MWh) equivalent to the annual supply of 56 popular houses. Show less

• Acting in maintenance engineering of Coke Plant and Boiler;• Technical responsible for electrical installations, NR10 management and energy efficiency;• Responsible for developing best maintenance practices, applying management tools, analysis and investigation of fault causes, fault trees, FMEA and RCM;• Responsible for asset management, maintenance and workforce balancing and plans restructuring through SAP system, implementation of new routes and maintenance routines to ensure… Show more • Acting in maintenance engineering of Coke Plant and Boiler;• Technical responsible for electrical installations, NR10 management and energy efficiency;• Responsible for developing best maintenance practices, applying management tools, analysis and investigation of fault causes, fault trees, FMEA and RCM;• Responsible for asset management, maintenance and workforce balancing and plans restructuring through SAP system, implementation of new routes and maintenance routines to ensure best field maintenance practices. • Conducting field inspections and monitoring major maintenance stops.• Responsible for the development of 6 Sigma (Green Belt) study to reduce 22,6% of electrical stoppages in mobile machines, with financial gain over U$ 647.776,20. Show less

• Technical responsible for the electrical installations of the Tremembé-SP and Suzano-SP units;• Coordinator of a park with 430 three-phase motors, 8 electric rooms (13.8KV), steam boilers, power generators, air compressors and chillers;• Responsible for the maintenance management of a park with 430 three-phase motors; • Manager of maintenance costs (budget) and KPIs with Maximo software; • Responsible for the management of energy costs; • Responsible for the… Show more • Technical responsible for the electrical installations of the Tremembé-SP and Suzano-SP units;• Coordinator of a park with 430 three-phase motors, 8 electric rooms (13.8KV), steam boilers, power generators, air compressors and chillers;• Responsible for the maintenance management of a park with 430 three-phase motors; • Manager of maintenance costs (budget) and KPIs with Maximo software; • Responsible for the management of energy costs; • Responsible for the implementation of NR10, NR12 and OHSAS 18001, and adaptation of classified areas, according to NBR IEC 60079 Rules; • Responsible for the adaptation of the SPDA system, according to NBR5419-2015 Rule, of the Tremembé and Suzano units; • Implementation of the PCM (Maintenance Planning and Control) and maintenance indicators of the units, based on the best practices of MCC (Reliability Centered Maintenance) and analysis of failures and root causes.• Project management for the project and budget of R$3,000,000.00 for the adaptation of the SPDA systems of the Tremembé and Suzano plants; • Project management and budget of R$7,000,000.00 for the adaptation of two electric rooms, with the acquisition of CCM's (TTA) of low voltage, infrastructure, electrical safety (FM-200), and electrical room adaptation according to NBR's; • Responsible for the study of Energy Efficiency of the Lighting System at the Tremembé plant, with a 6% reduction in the cost of electricity; Show less

• Acquisition of new clients and maintenance development of customer cards; • Development of projects for the following clients: Transpetro, Oi, INB, National Oilwell Varco, DFF, Correios, Águas do Brasil, Bandeirantes, Hyundai, FMC Technologies, Peugeot Citroen, Michelin, Nissan; • Development of projects such as: measurement and specification of capacitor bank, SPDA, NR10 (PIE), studies of grounding networks for substations, energy efficiency projects, power quality, ATPV (arc flash),… Show more • Acquisition of new clients and maintenance development of customer cards; • Development of projects for the following clients: Transpetro, Oi, INB, National Oilwell Varco, DFF, Correios, Águas do Brasil, Bandeirantes, Hyundai, FMC Technologies, Peugeot Citroen, Michelin, Nissan; • Development of projects such as: measurement and specification of capacitor bank, SPDA, NR10 (PIE), studies of grounding networks for substations, energy efficiency projects, power quality, ATPV (arc flash), power flow, and short circuit; • Coordination and implementation of projects for a Water and Sewage Treatment Plant, such as: electrical installation, instrumentation, commissioning, grounding, 13.8 kV substation, SPDA, and management of deadlines, costs, labor and third parties; • Specialist in SPDA Systems (NBR 5419/2005 and 2015) and earth mesh studies; • Engineer responsible for the coordination of field projects, with execution monitoring, cold and point-to-point testing, commissioning, and start-up of electrical and automation projects;• Speaker and training instructor of the NR10 (basic and SEP) rule.• Field design and coordination for the implementation of Protection Systems against Atmospheric Discharge (lightning arresters) for the following clients: INB, Oi, Transpetro, and NOV;• Coordination of selectivity and short-circuit, conducting studies and field surveys, development of technical reports and field commissioning with relays (Sepam 20 and Sel 551) for the following customers: Faurecia Automotive, FMC Technologies, and FGV (Getúlio Vargas Foundation);• Project coordination for the adequacy of the electrical installations and preparation of the NR10 Chart, according to the NR10 Rule, for the following clients: National Oilwell Varco - NOV (unit Macaé), Faurecia Automotive, and Hotel Bela Vista-VR; • Technical Report for ICMS Credit on Electric Energy, for the following clients: DuPont do Brasil, Vigor Group, and Faurecia Automotive Systems. Show less

• Coordination and commissioning of the automation and electrical projects of the assembly area, involving PLC's Step7-Siemens, RsLogix 5000 and Schneider PL7 and communication networks of the projects below:• Marriage System, project with cost of R$17,000,000.00 and savings of R$ 2,500,000.00;• Expansion Andon System (Lean Manufacturing), project costing R$ 1,800,000.00;• Management and design of the specifications for the development of automation and electrical projects of the… Show more • Coordination and commissioning of the automation and electrical projects of the assembly area, involving PLC's Step7-Siemens, RsLogix 5000 and Schneider PL7 and communication networks of the projects below:• Marriage System, project with cost of R$17,000,000.00 and savings of R$ 2,500,000.00;• Expansion Andon System (Lean Manufacturing), project costing R$ 1,800,000.00;• Management and design of the specifications for the development of automation and electrical projects of the assembly area; • Inspector of Low Voltage Electrical Installations;• Responsible for the coordination and supervision of works and third parties; • Responsible for the release and control of invoice payments, according to work progress; • Acquisition of new suppliers and new technologies for the automation/electrical area. Show less

• Responsible for the electrical installations and the adequacy of the installations according to the NR10 rule;• Responsible for electrical and automation maintenance in the assembly and machining areas which were monitored by Step 7-300 PLC (Siemens) and area operation; • Responsible for the electrical projects according to factory expansion (As-built), such as contracting demand, lifting loads, designing protections, reviewing lighting calculations, and determining strategic points… Show more • Responsible for the electrical installations and the adequacy of the installations according to the NR10 rule;• Responsible for electrical and automation maintenance in the assembly and machining areas which were monitored by Step 7-300 PLC (Siemens) and area operation; • Responsible for the electrical projects according to factory expansion (As-built), such as contracting demand, lifting loads, designing protections, reviewing lighting calculations, and determining strategic points for savings on electrical installations;• Development, implementation, and management of new projects; • Review of maintenance plans, inspection, spare part management, and purchase of spare parts through SAP R3; • Strategy development for maintenance and evaluation of the equipment operating conditions, focusing on the equipment safety;• Implementation of Lean manufacturing in the maintenance sector of the Porto Real plant; • Responsible for conducting trainings in order to enable the maintainers to carry out interventions in the substation;• Coordination of electrical installation adequacy projects, resizing of electrical system protections, SPDA, grounding mesh, compliance with standards, and adequacy of all required documentation according to NR10 and NBR-14039 Rules at the Porto Real Unit (RJ); • Responsible for the management of preventive and predictive maintenance, and maintenance of TRS, MTTR, and MTBF indexes; • Responsible for maintenance planning, and management of maintenance accounts and energy consumption;• Reduction in energy consumption tariffs (R$7,000.00 per month), through demand studies and negotiation with the manager of the power distribution company (Ampla). Show less