Robert Lee Email and Phone Number
Kota Kinabalu, MY
Robert Lee's Location
Kota Kinabalu, Sabah, Malaysia, Malaysia
Robert Lee's Contact Details
Robert Lee work email
- Valid
- Valid
Robert Lee personal email
n/a
Robert Lee phone numbers
About Robert Lee
My career summary:• BEng (Hons) in Mechanical Engineering, Loughborough Univ, UK.• 23 years total industrial experience within Oil & Gas and Power Generation industries. Currently, HOD Maintenance at CEL, Cambodia. Managing entire plant maintenance of 3 trains of CFB Boilers and steam turbine generators, including all auxiliary equipment. Covering all disciplines.• 2008-2020, in project design with Shell Malaysia E&P (but seconded to Mubadala Petroleum) in Kuala Lumpur with the SK320 Pegaga ICPP offshore project, currently at 70% fabrication. Immediately prior to this I was leading the RMAD (Remote Monitoring and Diagnostics) team for proactive and condition based monitoring for all Sarawak Shell assets. This is primarily monitoring and troubleshooting all of our offshore main gas turbine compressor sets.- Was seconded to PCSB in the Bardegg2 Baronia EOR project & PCSB Bokor Phase 3 EOR Project design teams in Kuala Lumpur as Lead Rotating Equipment Engineer. I was a Shell secondee with Petronas Carigali Sdn Bhd. Included FEED & Detailed Design stage technical analyses, design reviews, equipment selection and engineering support (desk/site) for the project, dealing in turbo compressors, gas turbines and various process pumps including variable speed drives.5 ½ yrs. - O&M Experience in Sabah Shell Petroleum, offshore Sabah, as a Rotating Equipment Support Engineer. Specialising in rotating equipment especially on Gas compression systems, and gas turbines. Involved in daily O&M on Barton, St Joseph, South Furious and Kinabalu platforms offshore Sabah. 4 ½ yrs.- Field Services & Projects in Dresser-Rand Asia Pacific, as Field Services Team Leader. Managing and providing technical support to 16 field service reps. Also, involved in managing field projects like equipment upgrades and modifications, and new equipment installation. Here was good experience in dealing with multi-disciplinary teams and with diverse cultures and backgrounds. 2 ½ yrs.- O&M Experience in Alstom Kuala Langat Power Plant as Mechanical Technical Engineer. Covering gas and steam turbines and heat recovery boilers and feed pumps. 2 ½ yrs.
Robert Lee's Current Company Details
Conocophillips
View
Lead, Discipline Engineering
Kota Kinabalu, MY
- Website:
- conocophillips.com
- Employees:
- 16855
Robert Lee Work Experience Details
-
Lead, Discipline EngineeringConocophillipsKota Kinabalu, My
-
Lead, Discipline EngineeringKebabangan Petroleum Operating Company Sdn. Bhd. (Kpoc) Aug 2022 - PresentKuala Lumpur, Wilayah Persekutuan, MyResponsible for all discipline engineering functions within KPOC, where the electrical,instrumentation, controls, metering and rotating equipment Technical Authorities (TA) report to this position. The primary responsibilities are on operations support and improvement to the KBB facilities, including for new projects and upgrades. -
Head Of Dept - MaintenanceCambodian Energy Limited Mar 2021 - Jul 2022• In a senior managerial role leading a department of 85 personnel for on-site maintenance planning, execution & improvements for the CEL/CEL2 power plant at Sihanoukville. Includes the engineering disciplines of mechanical, electrical, I&C and civil. Management of people, contractors, budgets, authorities, contracts etc for all routine, non-routine, planned, QA/QC, upskilling and more for the plant.• Develop & implement maintenance strategies, managing major plant overhauls and repairs and improvement projects. Also includes commissioning of new projects onsite.• Ensure meeting targets for technical, financial and contractual requirements. Sustenance of the high reliability and availability as mandated by the national grid and the PPA. -
Sr Reliability EngineerGraymont Nov 2020 - Mar 2021Richmond, British Columbia, CaLed the implementation of the reliability function in the global maintenance strategy within the region. This role coaches and mentors site employees including the management of site continuous improvement (Defect Elimination) projects and supporting project owners in the delivery of identified projects.• Drive change by engaging and influencing key stakeholders to identify and implement improvement processes.• Member of the " Reliability community of practice" (CoP) for maintenance professionals in APAC. Share best practices and support continuous improvement in the region.• Provide technical expertise and troubleshooting to support sites. Connect with all APAC sites.• Lead the implementation of RCM on sites in a region. This includes, 1. Annual review of asset reliability criteria 2. Lead RCM equipment criticality and preventative maintenance program development.• Lead RCA implementation and application on sites in a region. Including training of site employees.• Lead defect elimination processes on sites in a region. Preparation of performance data and maintenance information for defect and waste identification. Another important part of DE is the training of site employees. • Support the site ‘way of working’ by coaching and mentoring employees in the use of daily performance meetings.• Actively support and lead safety initiatives within the business.• In cooperation with the Maintenance Superintendent and the Maintenance Planner, conduct relevant maintenance forecasting and budgeting.• Monthly reporting of Reliability KPI’s.• Act as a project manager in the implementation of maintenance excellence across APAC as per the rollout plan.• Completion of other tasks, training and development activities and participate in company programs as required by the Company. -
Sr Rotating Equipment EngineerMubadala Petroleum (Seconded From Shell) Sep 2018 - Sep 2020Abu Dhabi, Abu Dhabi, AeWithin the project team for SK320 Pegaga Integrated Central Processing Platform with Mubadala Petroleum (MP) for the SK320 Pegaga project which is the design and fabrication of a 13k MT integrated CPP under a secondment from Shell, due for start-up end-2021. Fabrication is ongoing at Lumut, Perak and the project is around 70% completion. Pegaga is to be located offshore Bintulu, Sarawak and the main rotating machinery to be installed include Siemens gas turbine generators, gas turbine compressors, seawater cooling related pumps, firewater pumps and other process-critical rotating machinery. Responsibilities include Detailed Design and Fabrication execution and support, procurement, design reviews, optimization and testing of rotating equipment and static mechanical packages. This covers reviews of docs, workshops (HAZOP, IPF, HFE etc) and input to Technical deviations, support to tendering activities (including tendering preparation, pre-qualification, bid evaluation and award) for Detailed Design; develop and endorse machinery selection reports, application and sizing studies, technical expertise for calculations, selection, rotordynamics, operations & maintenance. Also total lifecycle cost and reliability (RAM) optimization, operations readiness, training of staff, installation and commissioning support and assistance, FAT approvals and process controls design. -
Lead Rotating Equipment Engineer (Rmad Team & For Materials Management Project)Shell Dec 2016 - Sep 2018London, England, GbLeading the RMAD (Remote Monitoring and Diagnostics) team for proactive and condition based monitoring for all Sarawak Shell assets since April 2018. This is primarily monitoring and troubleshooting all of our offshore main gas turbine compressor sets. Utilizing remote onshore tools like Shell Smartconnect, System1, VEWS, plant DCS and crucially the gas turbine TCPs. This is a major part of Shell’s Proactive Technical Monitoring initiative that was rolled out in 2017. Immediate successes so far include prevention of major start-up trips due to insufficient value multiplications for gearbox axial displacements for offshore's F23 K-2400 gas turbine compressors.For the MM Reset Project in-charged of the rotating equipment portion of the overall Sarawak Shell Berhad offshore facilities spare parts management and re-optimization, under the Operations Readiness team. Work includes the identification, verification, and repopulation of Sarawak asset’s rotating equipment spares and inventory for all critical services. The project includes management of excess spares, purchase of safety and production critical spares, reviews of existing SAP database and BOM creation, set-up of vendor PAs and GFAs etc. This project aims to re-instate the foundation of Materials Management (MM) to minimize operational deviations, production deferment, procurement costs, inventory costs and reduce Non-Cost-Recoverable risks in the near term. It also aims to enable the continuous improvement of the end-to-end processes of Logistics, Maintenance & MM (LMMM) in the longer term - for sustained and improved business performance outcomes. Target is a saving of 11.4 mil USD within the next four years. -
Sr Rotating Equipment Engineer With Petronas (Secondment)Shell Jun 2013 - Dec 2016London, England, GbI was seconded to PCSB for my experience and expertise in the Bardegg2 Baronia EOR project. This is a large-scale PCSB (PETRONAS) project and is due for completion end-2017. I joined this project design office at the start of its FEED in July 2013 and am now in the Fabrication stage for the main central processing platform (CPP) and jackets, after having completed FEED & Detailed Design at KL and Seoul. Fabrication was done at Ulsan, S Korea.Rotating Equipment scope at the main CPP:• Gas turbine compressors 2 x 50% - 2 x (RR RB211 G62) + (D-R D8+D4). For gas export and gas reinjection. With heat recovery thermal oil system as a WHRU.• Gas Turbine Generators 4 x 33% - 4 x Solar Taurus 70 generator sets.• WI Pumps 3 x 33% - 3 x Barrel type BB5 centrifugal pumps .• Condi pumps, other centrifugals - BB3 and OH2 pumps• Seawater lift pumps – 4 x vertical submersibles for water injection and utilities.• Recovery compressor 1 x 100% - Four throw Ariel recip unit c/w static equipment packaging.• Firewater pumps 2 x 100% - 2 x diesel driven verticals.• Emer. Diesel Generator – 1 x 100% diesel engine generator.• Air comp and utility pumps• RAM analysis and optimization. HAZID, HAZOP, SIL, HFE, ECA etc reviewsResponsibilities included FEED execution and beyond, procurement of Long Lead and high priority items, reviewing /input to Technical deviations, support to tendering activities (including tendering preparation, pre-qualification, bid evaluation and award) for FEED, Detailed Design and EPCIC contracts; develop and endorse machinery selection reports, application and sizing studies, technical expertise for calculations, selection, rotordynamics, operations & maintenance. Also total lifecycle cost and reliability optimization, operations readiness, training of staff, installation and commissioning support and assistance, FAT approvals and process controls design. Also, included were contract drafting and commercial responsibilities
-
Lead Rotating Equipment Engineer (Seconded From Shell)Shell Jun 2011 - Jun 2013London, England, GbEOR Centre team, for the Bokor Phase 3 EOR project, for offshore Miri. I joined this project design office at the start of FEED in July 2011 and have now completed FEED. The next milestone would be to get funding for detailed design and procurement. This project is an oil EOR project utilizing the iWAG principle which includes water and gas injection facilities, encompassing a mother platform (CPP) and seven satellite producer and injector platforms. This project is then linked to an existing facility for the production of both oil and gas. Enhanced Oil Recovery is relatively new in Malaysia so valuable experience has been gained on equipment selection and configurations that will match reservoir recovery profiles, fracturing risks and souring cases. My responsibilities include full accountability to rotating equipment facilities from selection, analysis, review, total lifecycle costing and specifications to ensure smooth installation, commissioning and maintenance.Rotating Equipment scope:• Gas turbine compressors 2 x 50% - 2 x (RR RB211 G62) + (D-R D20+D10+D6). For gaslift and gas injection.• Gas Turbine Generators 4 x 33% - 4 x Solar Taurus 60 generator sets.• WI Pumps 3 x 50% - 3 x VFD Barrel type centrifugal pumps .• Seawater lift pumps – 5 x vertical submersibles for water injection and utilities.• Crude Oil Pumps 3 x 50% - 3 x OH5 type centrifugals.• Firewater pumps 2 x 100% - 2 x diesel driven verticals.• Emer. Diesel Generator – 1 x 100% diesel engine generator.• Miscellaneous utility pumps.• RAM analysis.
-
Sr Rotating Equipment EngineerShell Sep 2008 - Jun 2011London, England, GbMy Shell work prior to the above secondment included technical preparations and analyses, design reviews, equipment selection and site support (like RCFA) for all our client locations, dealing in turbo and reciprocating compressors, pumps and gas turbines. I have also been actively involved in Shell gas compressor standardization work and Shell development releases like GE’s PGT25+G4 and LMS100 gas turbines. I was also heading a project with a Shell operating location to determine Total Cost of Ownership for a number of new equipment configurations involving gas turbines and centrifugal compressors, which covers capex & opex projections for 15 years of operation. This one included reliability and availability calculations with cost estimations for installation and commissioning. I also have experience in numerous factory acceptance tests for rotating equipment and am familiar with test procedures and acceptance criteria. I am the Shell Subject Matter Expert (SME) for reciprocating machinery (engines, compressors, pumps) and also a Technical Authority in this discipline. I am constantly involved in the revision and creation of Shell DEPs (engineering Standards) and often called upon for advice. I have overseas working experience in The Netherlands and Italy.Project support for regional projects covering all major rotating equipment for onshore and offshore facilities. Field trouble shooting and repair supervision for site issues. I led the development of GE & MANTurbo standardized gas compression packages for the Contracts and Procurement Team, to enable standardized equipment to be purchased. Covers technical and commercial.
-
Field Service ManagerDresser-Rand Jun 2006 - Sep 2008Houston, Tx, UsLed field service team that covered Asia Pac region. In charged of 16 FSR's of many nationalities. Included commercial and technical support for all field jobs.Technical support to all field representatives, engineering support, troubleshooting, proposal generation and project engineering. In-charged of 16 field representatives covering turbo and reciprocating compressors, gas & steam turbines, power turbines & expanders and one of my main objectives was to provide all technical support to ensure good job execution and timeliness. This will include technical preparations, solutions, execution and follow-up services. Field Projects work covering typically small/medium scale projects like upgrades, replacement units and revamps were also covered under my scope. I had the opportunity to involve myself in the electrical and controls disciplines when in these projects. I was also put in charge of all operational aspects of the field services business including safety, commercials like bookings/sales forecasts, order capturing and especially planning for the meeting of the year’s AOP. -
Rotating Equipment Support EngineerSabah Shell Petroleum Co Ltd Feb 2002 - Jun 2006London, England, GbSupport all of Sabah Shell's offshore oil producer facilities, namely South Furious, St Joseph, Barton and Kinabalu. Perform, plan and execute compressor repairs and overhauls. Specialising in reciprocating gas compressors. Young in my career I was already leading teams of maintenance staff & external contractors in performing rotating services on planned / un-planned maintenance (CM, PM & overhauls). Covering plant maintenance planning and execution, including parts management and ordering. Hands-on mechanical maintenance and repair e.g. rotor and crankshaft overhauls, alignment, balancing, bearing and seal change-outs etc, including all site preparation and planning. Specifically reciprocating gas compressors, gas turbines, centrifugal compressors and pumps. Execution of condition monitoring (thermography and ultrasonic) and maintenance strategies.Participated in yearly OPEX determination and justification. Root cause analyses and troubleshooting / TRIPOD and plant reliability improvement projects (e.g. Online Condition Monitoring of compressors). Initiation of new technologies and methodologies into maintenance practices (e.g. advanced video borescoping, thermography etc). Review and improvements to existing maintenance practices. Setting up and optimizing CMMS system and spares inventory including improving purchasing efficiencies.
-
Technical Mechanical EngineerAlstom Power O & M Ag Sep 1999 - Feb 2002At Kuala Langat 720MW power plant, near KLIA. Plan and execute all periodic gas turbine ( ABB GT13E2) inspections, and also all steam system repairs and maintenance.Responsibilities included mechanical plant maintenance, implementing short to medium term plans to enhance plant reliability and performance, and overall plant optimization with condition monitoring using the latest CM technology and skills available. Ensure plant equipment availability, reliability & optimization and facilitating smooth operations of the plant to meet operational targets.Utilization of CMMS like API Pro and SAP for purchasing. As the OEM we are trained to be very familiar with internal gas turbine inspection and repair methods and practices of ABB GT 13E2’s in combined cycle configuration and ABB steam turbines, all which I performed directly. Job scope covered not only the turbines but also the HRSG boilers and the balance of plant (BOP). This exposed me greatly to static equipment and piping maintenance also, including water treatment and plant chillers
Robert Lee Skills
Microsoft Office
Management
Research
Leadership
Training
Coaching
Lecturing
Teaching
Mentoring
Petrophysics
Oil And Gas Industry
Refinery
Feed
Petroleum
Oil/gas
Gas
Upstream
Rotating Equipment
Petrochemical
Air Compressors
Onshore
Pumps
Gas Turbines
Commissioning
Project Engineering
Field Development
Steam Turbines
Turbines
Power Generation
Factory
Centrifugal Compressors
Refinery Operations
Oil And Gas
Onshore Operations
Engineering
Inspection
Power Plants
Energy
Epc
Piping
Mechanical Engineering
Robert Lee Education Details
-
Loughborough UniversityMechanical Engineering -
Brighton MetA-Levels
-
St John'S Institution Kuala LumpurHigh School/Secondary Diplomas And Certificates
Frequently Asked Questions about Robert Lee
What company does Robert Lee work for?
Robert Lee works for Conocophillips
What is Robert Lee's role at the current company?
Robert Lee's current role is Lead, Discipline Engineering.
What is Robert Lee's email address?
Robert Lee's email address is ro****@****ell.com
What is Robert Lee's direct phone number?
Robert Lee's direct phone number is (951)-735*****
What schools did Robert Lee attend?
Robert Lee attended Loughborough University, Brighton Met, St John's Institution Kuala Lumpur.
What are some of Robert Lee's interests?
Robert Lee has interest in Civil Rights And Social Action, Politics, Environment, Education, Poverty Alleviation, Science And Technology, Human Rights, Animal Welfare, Arts And Culture.
What skills is Robert Lee known for?
Robert Lee has skills like Microsoft Office, Management, Research, Leadership, Training, Coaching, Lecturing, Teaching, Mentoring, Petrophysics, Oil And Gas Industry, Refinery.
Who are Robert Lee's colleagues?
Robert Lee's colleagues are Mike Grimes, Michael Loran, Rismunandar Yazid, Russell Ray, Teguh Yuwono, Roy Middleton, David Noye.
Free Chrome Extension
Find emails, phones & company data instantly
Find verified emails from LinkedIn profiles
Get direct phone numbers & mobile contacts
Access company data & employee information
Works directly on LinkedIn - no copy/paste needed
Aero Online
Your AI prospecting assistant
Select data to include:
Total price:
$0.00
0 records × $0.02 per record
Download 750 million emails and 100 million phone numbers
Access emails and phone numbers of over 750 million business users. Instantly download verified profiles using 20+ filters, including location, job title, company, function, and industry.
Start your free trial