Electrical Planner
CurrentActively seeking positions in the Nuclear and Fossil Power industry as an Electrical Planner/Technical Reviewer/Field Engineer/Construction Manager. Available immediately.
Please complete the CAPTCHA to continue
A concise factual answer block for searchers comparing this professional profile.
Robert "Tracy" Hatcher is listed as Electrical Planner at Hatcher, Electrical Consultant, based in Knoxville, Tennessee, United States. AeroLeads shows a matched LinkedIn profile for Robert "Tracy" Hatcher.
Robert "Tracy" Hatcher previously worked as Retired due to medical reasons. at Independent and Electrical Planner, Field Engineer, Technical Reviewer, Construction Management at Hatcher, Electrical Consultant. Robert "Tracy" Hatcher holds Associate'S Degree, Electronics, 4.0 Gpa from Fountainhead College Of Technology.
Summary of Qualifications• Over forty one (41) years of experience in the electrical field as a Draftsman, Designer, Construction Superintendent, Start up and Commissioning Superintendent, Field Engineer, Electrical Planner, Technical Reviewer and Project Manager.• Problem solver who persistently follows up until an issue is resolved. Exceptional troubleshooter and decision maker.• Highly attentive to drawings, procedures and specifications. Able to manage multiple tasks simultaneously.• Have never missed a deadline or had a back charge associated to a design or construction project.Technical Knowledge and Professional Accomplishments• Knowledgeable of electrical substations and control systems associated with commercial nuclear plants, government nuclear installations, electrostatic precipitators, flue gas desulfurization units, coal fired power plants, gypsum board manufacturing plants, alumina recovery systems, and industrial process plants.• Six (6) years knowledge of nuclear systems, nuclear safety, lock out/tag out procedures, daily reporting and writing/technical reviewing nuclear work plans. Prepared work plans for Appendix R modifications.• Skilled in reading and understanding procedures, technical specifications, detailed installation drawings, electrical schematics, loop diagrams, ladder diagrams, and one/three line diagrams.• Skilled in supervising the construction and start up/commissioning of overhead and underground power distribution systems from 120V to 345kV.• Specializing in 480V motors, 480V motor control centers, including large (6.9Kv, 25,000HP) horsepower motors, small and large horsepower motor starters, high voltage substations, switchgear, switchboards, process instrumentation and control power systems.• Generated over 330 work orders with a 92% acceptance rate in an 18 month period. Proficient in the use of MAXIMO, SWAP, ICRDS, DCN’S, EDCR’S, FCR’S, MS Windows, MS Office to research, plan, and tech review nuclear work plans.
Listed skills include Enterprise Asset Management, Nuclear Engineering, Microsoft Office, Construction Management, and 45 others.
Company context helps verify the profile and gives searchers a useful next step.
A career timeline built from the work history available for this profile.
Knoxville, Tn
Actively seeking positions in the Nuclear and Fossil Power industry as an Electrical Planner/Technical Reviewer/Field Engineer/Construction Manager. Available immediately.
Knoxville, Tn
United States
Actively seeking positions in the Nuclear and Fossil Power industry as an Electrical Planner/Technical Reviewer/Field Engineer/Construction Manager. Available immediately.
East Tennessee
Worked as a volunteer Construction Coordinator building decks and wheelchair ramps for disabled Iraqi and Afghanistan Veterans. I collected volunteers from local businesses, volunteer fire departments, volunteer rescue squads, churches and anyone who wanted to help. My activities included making material lists, using screw guns, circular saws, and knowing all the local codes for the decks and wheelchair ramps. I also had some ladies who helped me get materials donated by other local businesses.
Spring City, Tn
Used MAXIMO, SWAP, ICRDS, FCR's, DCN's, EDCR's, and EDCR2's to plan and technical review nuclear work packages for the installation of conduits, conduit supports, pull boxes, junction boxes, electrical panels, cables, motors, and instrumentation. Performed field walkdowns to verify actual field conditions prior to planning work orders. Performed technical review for adherence to procedures on finished work orders. Planned modifications to electrical systems for Appendix R requirements.
Tva Watts Bar Nuclear Plant - Spring City, Tn
Resolved field conflicts, baselined work packages, closed work packages and inspected electrical wiring and termination work performed in the field. Witnessed and signed off on procedural work as it was constructed. Worked in MAXIMO, SWAP, and ICRDS to verify that actual work performed and as-built configurations were incorporated into these data bases. Researched DCN's, FCR's, EDCR's, and EDCR2's as needed for their impacts on field work.
Knoxville, Tennessee Area, Nationwide
Construction oversight, start up and commissioning, and electrical design on pollution control systems for fossil power plants. Thorough knowledge of nuclear systems, electrostatic precipitators, flue gas desulfurization units, and selective catalytic reduction systems. Knowledge of all documentation, work plans, safety procedures and reporting required of nuclear and fossil power projects. Completed an AAS degree in Electronics with a 4.0 gpa.
Alcoa Aluminum-Wenatchee, Wa And Evansville, In - Homer City Generating Station
Construction oversight, start up and commissioning, and system troubleshooting on high and low voltage electrical systems associated with electrostatic precipitators, flu gas desulfurization units, selective catalytic reduction systems, alumina enrichment systems, and pulp and paper dryers.
Us Corp Of Engineers - Ft. Wainwright Army Hospital, Fairbanks, Ak
Inspected electrical systems and supervised the replacement of the emergency generators in the Ft. Wainwright Army hospital. Documented system upgrades, supervised the electrical contractor and inspected the job when completed.
Us Corp Of Engineers - Nationwide
Inspected electrical systems and recommended upgrades for United States Army Reserve facilities across the country. Designed system upgrades, hired electrical contractors to perform the needed work and inspected jobs as they were completed.
Doe Y-12 Weapons Plant, Oak Ridge, Tn
Inspected and documented field configurations of electrical, security and life safety systems at the Department of Energy's Y-12 Weapons Plant in Oak Ridge, TN. Generated as-built drawings of actual field configurations of critical electrical systems.
Doe Rocky Flats Weapons Plant, Denver, Co
Inspected and documented field configurations of electrical, instrumentation, and control systems at the Department of Energy's Rocky Flats Weapons Plant in Denver, CO. Generated as-built drawings of actual field configurations of critical electrical systems.
Tva Browns Ferry Nuclear Plant
Resolved work order field conflicts, baselined work order packages, closed work order packages and inspected electrical cable installation and cable splicing work performed in the field. Witnessed and signed off on procedural work as it was constructed. Researched DCN's and FCR's as needed for their impacts on field work.
Doe Y-12 Weapons Plant - Oak Ridge, Tn
Inspected and documented field configurations of electrical systems, security systems and life safety systems at the Department of Energy's Y-12 Weapons Plant in Oak Ridge, TN. Inspected systems and generated as-built drawings of actual field configurations of critical electrical systems.
Tva Colbert Steam Plant - Tuscumbia, Al
Designed and supervised the construction of high and low voltage electrical systems associated with electrostatic precipitators, flu gas desulfurization units, selective catalytic reduction systems, alumina enrichment systems, and pulp/paper dryers. Generated purchase orders for the procurement of motors, instrumentation and high voltage electrical distribution equipment. Reviewed vendor drawings and recommended changes to meet project specifications.
Doe Y-12 Weapons Plant - Oak Ridge, Tn
Inspected and documented field configurations of electrical, security and life safety systems at the Department of Energy's Y-12 Weapons Plant in Oak Ridge, TN. Inspected and generated as-built drawings of actual field configurations of critical electrical systems.
Alcoa Aluminum - Alcoa, Tn
Designed electrical power and control systems associated with aluminum smelting operations at Alcoa Aluminum's plant expansion project.
Drying Systems Division - Knoxville, Tn
Designed 120V - 50,000V electrical systems associated with electrostatic precipitators, flu gas desulfurization units, selective catalytic reduction systems, alumina enrichment systems, and pulp and paper dryers.
Dod Arnold Engineering And Development Center - Tullahoma, Tn
Provided guidance to electricians setting up monitoring instrumentation for wind tunnel testing facilities used by the US Air Force. Changed the design of control room wiring for different test situations in mach 2 through mach 10 wind tunnels.
Switchboard Design Division - Burlington, Ia
Used customer supplied schematics to design and construct 480V switchboards for a hydro power generation project in China. Worked with the factory to resolve wiring conflicts during the construction of the units.
Doe Nevada Test Site - Las Vegas, Nv
Designed and drafted low voltage electrical systems in mobile timing and firing trailers used at the DOE Nevada Test Site for weapons testing. Resolved wiring conflicts that arose during construction of the trailers.
Epcot Center, Lake Buena Vista, Florida
Electrical draftsman/designer responsible for drafting the 12kV substations that supplied power to the pavillions at EPCOT Center.
Activities and Societies: Infraguard Member, IEEE MemberCertified Electronics Technician
Activities and Societies: Vocational, Industrial Club of America (VICA), Fellowship of Christian Athletes (FCA), Key Club, Wrestling.
Quick answers generated from the profile data available on this page.
Robert "Tracy" Hatcher works for Hatcher, Electrical Consultant.
Robert "Tracy" Hatcher is listed as Electrical Planner at Hatcher, Electrical Consultant.
Robert "Tracy" Hatcher is based in Knoxville, Tennessee, United States while working with Hatcher, Electrical Consultant.
Robert "Tracy" Hatcher has worked for Hatcher, Electrical Consultant, Independent, Tva Watts Bar Nuclear Plant, Bechtel Construction Operations, Inc., and Alstom Power.
You can use AeroLeads to view verified contact signals for Robert "Tracy" Hatcher at Hatcher, Electrical Consultant, including work email, phone, and LinkedIn data when available.
Robert "Tracy" Hatcher holds Associate'S Degree, Electronics, 4.0 Gpa from Fountainhead College Of Technology.
Robert "Tracy" Hatcher is listed with skills including Enterprise Asset Management, Nuclear Engineering, Microsoft Office, Construction Management, Construction Engineering, Electrical Distribution Design, Field Work, and Field Operations.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial Search contacts