Roderick Virtucio Email & Phone Number

Saudi Arabia

Khair Inorganic Chemical Industries Company P.O. Box 31418 Ras Al Khair 37258 Ksa

o Participate Engineering review activity for projects periodica;;y to identify gaps to decide the corrective actions to insure On time Deliveryo Define the applicable requirements for drawings twmplates including applicable development of Graphics and DCSo Inspection of materials for Electrical and Instrumentation are properly handled after inspection.o Can solve out problems in Field rectification and required modification of NCR and make sure As Built if required for closing… Show more o Participate Engineering review activity for projects periodica;;y to identify gaps to decide the corrective actions to insure On time Deliveryo Define the applicable requirements for drawings twmplates including applicable development of Graphics and DCSo Inspection of materials for Electrical and Instrumentation are properly handled after inspection.o Can solve out problems in Field rectification and required modification of NCR and make sure As Built if required for closing punch list items.o Demonstrate a personal commitment to Health, Safety and the Environment by following the Company’s Health, Safety & Environmental Policy.o Attend and contribute to site and project technical meetings as necessary.o Assist in Instrumentation and DCS Completion and handover documentation as necessary.o Participating in contractor corrective actions and ensuring resolution of nonconformities.o Pre‐commissioning, Commissioning and start‐up support to operations.o Monitored working of area assigned and ensured that all routine maintenance work was done within timeframeo Responsible for the Electrical, Instrumentation & Control System Cables installation which includes above and underground cable routing of ,cable conduits and trays, earthing for trays motors ,instrument devices and lightings system installation. Show less

Maaden Ammonia Plant P.O. Box 68861 Ras Al Khair 37258 Kingdom Of Saudi Arabia

• Understanding and ensuring compliance with relevant health and safety regulation and quality standards• Review all C&I drawings and ensure that the quality of design and drawings produced for enquiry and fabrication purposes is of satisfactory standard• Prepare technical bid analysis for C&I equipment• Attend coordination meetings and engineering review meetings with supplier as required• Review document requirements and issue dates for major equipment with suppliers and… Show more • Understanding and ensuring compliance with relevant health and safety regulation and quality standards• Review all C&I drawings and ensure that the quality of design and drawings produced for enquiry and fabrication purposes is of satisfactory standard• Prepare technical bid analysis for C&I equipment• Attend coordination meetings and engineering review meetings with supplier as required• Review document requirements and issue dates for major equipment with suppliers and assist Procurement Department in compiling a Supplier’s Document Index• Assist Procurement Department with the expediting of supplier documents• Review and approve supplier documents for instrumentation and distribute• Attend site surveys and contribute to site survey reports• Give support to client, project engineers, other specialist engineers and inspectors on C&I engineering matters. Review C&I aspects of package unit supplier’s drawings as requested by the engineer responsible for the equipment• Advise the Lead C&I Engineer of any slippages and their causes and proposed corrective action• Advise the Lead C&I Engineer of any technical problems and unresolved differences with other groups• Co-ordinate with Procurement Department and ensure certified drawings are available in time to meet the engineering schedules• Notify the Project Engineer of all deficiencies in the flow of data or other basic information required for execution of work.• Assist the Lead C&I Engineer with the progress reports• Follow up C&I construction work on project sites to ensure correct interpretation of designs regarding installation. Resolve any C&I problems arising during commissioning• Keep abreast of development in the C&I engineering field• Suggest ways to improve efficiency, costs and service in the execution of projects• Assist where necessary in the compilation of operating manuals and mechanical catalogues• Perform such duties as may reasonably be assigned by the Lead C&I Engineer Show less

Kjo Global Gas & Ngl Recovery And Handling Project P.O. Box 250 Al-Khafji 31971

I want to obtain a challenging management, administrative, or technical position as deemed suitable to my skills, experience and backgrounds, to help a successful organization or company expand further and to help my self-grow further professionally, technically, and financially, to become an effective team player in a progressive organization or company.

Turaif Saudi Arabia

Yanbu Saudi Arabia

A) COMMISSIONING PHASE: Attend and contribute to Site and Project technical meetings as necessary. Participation in Site Acceptance Test of Instrumentation / and control packages as necessary. Assist in DCS and Instrumentation Completion and hand over documentation as necessary. Experience with large multidiscipline projects with substantial relevant experience in petrochemical or oil and gas project environment. Experience in developing engineering design criteria and… Show more A) COMMISSIONING PHASE: Attend and contribute to Site and Project technical meetings as necessary. Participation in Site Acceptance Test of Instrumentation / and control packages as necessary. Assist in DCS and Instrumentation Completion and hand over documentation as necessary. Experience with large multidiscipline projects with substantial relevant experience in petrochemical or oil and gas project environment. Experience in developing engineering design criteria and specifications.onfirmed & Witnessed Performance Test and system capability test. Experience in managing/coordinating engineering contractors and equipment vendors.Commissioning Punch list management and status report writing for all discipline. Experience in DCS, Safety Systems (SIS), PLC and packaged equipment control .B) CONSTRUCTION PHASE: Supervising and remain vigilant regarding all aspect of I and C construction activities.Respond with appropriate and necessary levels of I & C construction supervision to provide quality assurance in accordance with contract specification and documents Coordinating interface of I & C construction works with other contractors.Orients inspector to verify that the contractor is following his approved site & Safety Plan. Assisting Resident engineers and QS team in negotiations with contractor regarding the value of claims or change of schedule. To provide general instrument and controls engineering support to the Construction and the Operations Team during the project EPC and Start up Phase on DCS ESD and FireAlarm and Suppression System to insure operational readiness. Show less

P.O. Box 68861 Ras Al Khair Kingdom Of Saudi Arabia

o Oversees the daily workflow of the departmentso Provides training related to device to employees and or customers.o Analyze current equipments &requirements for design improvementso Design and test of prototype of equipments.o Resolving issues and respond technical queries from site crews and subcontractors.o Acts as a project engineer for design and and manufacturing development.o Inspection of materials for Electrical and Instrumentation are properly handled after… Show more o Oversees the daily workflow of the departmentso Provides training related to device to employees and or customers.o Analyze current equipments &requirements for design improvementso Design and test of prototype of equipments.o Resolving issues and respond technical queries from site crews and subcontractors.o Acts as a project engineer for design and and manufacturing development.o Inspection of materials for Electrical and Instrumentation are properly handled after inspection.o Can provide timely and constructive performance evaluationo Can solve out problems in Field rectification and required modification of NCR and make sure As Built if required for closing punch list items.o Demonstrate a personal commitment to Health, Safety and the Environment by following the Company’s Health, Safety & Environmental Policy.o Attend and contribute to site and project technical meetings as necessary.o Assist in Instrumentation and DCS Completion and handover documentation as necessary.o Participating in contractor corrective actions and ensuring resolution of nonconformities.o Pre‐commissioning, Commissioning and start‐up support to operations.o Monitored working of area assigned and ensured that all routine maintenance work was done within timeframeo Responsible for the Electrical, Instrumentation & Control System Cables installation which includes above and underground cable routing of ,cable conduits and trays, earthing for trays motors ,instrument devices and lightings system installation.o Involvement in the selection of equipment and materials to project requirements. Show less

Khafji, Eastern, Saudi Arabia

• Understanding and ensuring compliance with relevant health and safety regulation and quality standards• Preparation of Daily work schedule and materials needed for the project activities.• Maintaining & implementing appropriate quality of work.• Supervision the job and Comply with safety regulations of the company policy.• Filing personnel records such as time and production record, inventory data’s, repair and maintenance statistics or test results.• Implement, evaluate… Show more • Understanding and ensuring compliance with relevant health and safety regulation and quality standards• Preparation of Daily work schedule and materials needed for the project activities.• Maintaining & implementing appropriate quality of work.• Supervision the job and Comply with safety regulations of the company policy.• Filing personnel records such as time and production record, inventory data’s, repair and maintenance statistics or test results.• Implement, evaluate and develop maintenance policies and procedure.• Inspect work areas and checking of tools and equipments and providing of some safety training for safe working conditions.• Maintain good working and met specific time on scheduled time• Verification of all take off materials needed at the project scope.• Compute and estimation and actual costing of factors for materials, labor or outside contractor scope.• Material requisition and supplies for tools, equipment and replacement parts.• Facilitate all electrical & Instrumentation works thru control system and packages, leak detections system and Fire and Gas devices and suppression system• Involves in testing, maintaining and modifying of control system if required• Installation of impulse tubing and termination for digital and analogue cable through marshalling panels up to PLC Logic control• Coordinate and check subcontractors in electrical and instrumentation field engineering.• Inspect permanent plant components through receiving process to ensure project drawings and standards are attained.• Coordinate with Electrical Engineers to solve drawing as well as set-route problems.• Support technical coordination of tag-out and lock-out program activities.• Coordinate and record client as well as vendor needed electrical installations and tests verification • Support project controls and supervise detailed work plans as well as mini-schedules establishment. Show less