Roldan Rodriguez Email and Phone Number

Performs all day-to-day routine operation in the specific area of operation DCS/Field, in a flexible manner across multiple parts of the process to ensure uninterrupted production and safe operation of the plant. • Operate the DCS (Distributed Control System -Yokogawa) for plants startup and shutdown operations in order to meet Company’s objectives and production targets.• Monitor and control all process parameter conditions such as flow rates, pressures, temperatures, levels, etc… Show more Performs all day-to-day routine operation in the specific area of operation DCS/Field, in a flexible manner across multiple parts of the process to ensure uninterrupted production and safe operation of the plant. • Operate the DCS (Distributed Control System -Yokogawa) for plants startup and shutdown operations in order to meet Company’s objectives and production targets.• Monitor and control all process parameter conditions such as flow rates, pressures, temperatures, levels, etc, through displays, graphics and trend logs. • Communicate with field operators for parameter adjustments in field. • Report to Shift Supervisors in case of parameter abnormalities and process deviations immediately. • Makes minor plant adjustments when necessary and reports any serious faults to the Supervisor with appropriate remedial actions, implements immediately the approved actions, procedures and standard emergency responses.• Takes immediate corrective actions to limit risk to personnel, plant equipment and production during emergency situations.• Monitor & Control the usage of raw materials, chemicals and other plant utilities effectively to an optimum level in safe manner. • Prepare & Assist in preparation of necessary plant - operational reports as requested by Production Supervisor or Team Leader. • Ensure the safe shutdown, isolation and blow down of relevant Section / plant during emergency situations. • Assist in studying the problem and issues arising in the operation and process to identify suitable remedial measures. • Identify and investigate the faults and inform the concerned departments, for remedial action. • Adhere to Company’s HSE policy, standards and approved operating procedures while performing the duties / tasks. • Perform other related duties as assigned by Supervisor such as taking part in training / developing new recruits / implementing orientation programmes, preparing necessary reports, plant shutdown and startup procedures, etc. Show less

• Accountable for completing the project safely, on time and within the budget.• Involve in pre planning stage and design development of projects.• Developed plans, assigning tasks and tracking of the projects progress using Microsoft Project;• Do Bill of Materials for each specified project.• Negotiated with the Suppliers for the Equipment, Materials, and Instrument to be used in the Project.• Worked out the human and material resources needed;• Developing timeline for… Show more • Accountable for completing the project safely, on time and within the budget.• Involve in pre planning stage and design development of projects.• Developed plans, assigning tasks and tracking of the projects progress using Microsoft Project;• Do Bill of Materials for each specified project.• Negotiated with the Suppliers for the Equipment, Materials, and Instrument to be used in the Project.• Worked out the human and material resources needed;• Developing timeline for each projects;• Do toolbox meeting with the team and promote safety and healthy work environment;• Check all the details, specifications and requirements of each project.• Continuous process and development;• Supervise each performance and motivate a team of workers;• Check and prepares daily time records of individuals; Show less

• Supervise a team of Lead operators, Controls and field operators.• Responsible in the operation of all equipment at Utilities department such Conveying System, Pumps, Coal Mills, Limestone Crushers, Ball Mill, Rotary Kiln, Slaker and Thickener.• Follow all operational instructions from Management.• Communicate production information and performance expectations to crew operators.• Participate in regular and ad-hoc meetings regarding production, by providing feedback and… Show more • Supervise a team of Lead operators, Controls and field operators.• Responsible in the operation of all equipment at Utilities department such Conveying System, Pumps, Coal Mills, Limestone Crushers, Ball Mill, Rotary Kiln, Slaker and Thickener.• Follow all operational instructions from Management.• Communicate production information and performance expectations to crew operators.• Participate in regular and ad-hoc meetings regarding production, by providing feedback and specific expertise.• Coordinate Start-ups and Shutdowns with Maintenance Coordinator and Production Superintendent. • Review and approve equipment isolation to be given for maintenance.• Issue service orders as required and ensure maintenance work is coordinated and completed as required.• Creates work request/ work orders for equipment maintenance using EAM (Enterprise Asset Management)• Issue stores requisitions as required and ensure operators have the tools and equipment required to do their work.• Provide troubleshooting expertise to operators and encourage crew members to problem solve and provide solutions for improvement.• Effectively manage overtime with Production Superintendent and manage all personnel issues• Participate in and ensure that all Safety and Environment activities are completed as required.• Participate in and perform incident investigations and reviews as required by the Company.• Provide leadership and lead by example.• Foster cooperation and collaboration between crew and all other plant personnel.• Understand and enforce company policies, practices and procedures.• Provide and encourage training and development opportunities for crew members. Show less

• Briefing the Permit Coordinator on the hazard controls in place;• Clarifies the scope of work for the work permit;• Ensures Work Instruction’s / Risk Assessment have been completed by the Permit Acceptor / Work Team;• Authorizes the issue / closure of Permits and Certificates;• Ensures all documents associated to the work permits are maintained as per the Permit to work procedure; • Manages all permit locks and keys include locking the permit board lock… Show more • Briefing the Permit Coordinator on the hazard controls in place;• Clarifies the scope of work for the work permit;• Ensures Work Instruction’s / Risk Assessment have been completed by the Permit Acceptor / Work Team;• Authorizes the issue / closure of Permits and Certificates;• Ensures all documents associated to the work permits are maintained as per the Permit to work procedure; • Manages all permit locks and keys include locking the permit board lock boxes;• Complies with company Permit to Work document control procedures;• Participates in incident investigations and audits as required by the Company;• Complies and enforces company policies, practices and procedures. Show less

• Involved in both the pre-production (planning) stage as well as the production (control and supervision) stage;• Participated in project design review such drawing details, equipment sizing and materials specification;• Prepared all the materials and equipment list needed prior to production;• Developed plans, assigning tasks and tracking of the projects progress using Microsoft Project;• Monitored production processes, materials and work environment;• Specification check… Show more • Involved in both the pre-production (planning) stage as well as the production (control and supervision) stage;• Participated in project design review such drawing details, equipment sizing and materials specification;• Prepared all the materials and equipment list needed prior to production;• Developed plans, assigning tasks and tracking of the projects progress using Microsoft Project;• Monitored production processes, materials and work environment;• Specification check of the structure in accordance to drawing details;• Worked out the human and material resources needed;• Developing timeline for each projects;• Continuous process and product development;• Responsible for the selection and maintenance of equipment; • Liaising among different departments, e.g. suppliers, managers;• Promoted safety and healthy work environment;• Prepared the project specifications and delivery list of each project;• Supervised and motivated a team of workers;• Reviewed the performance of subordinates;• Autocadd drawing detailing, revising and editing based on the plant design specification;• FASTCAM/FASTNEST programming for CNC plasma cutting operation. Show less

• Assist Senior Mechanical Engineer in the implementation of preventive maintenance of production machineries• Oversees and follows-up the progress in critical maintenance work to minimize downtime.• Monitor performance of all operating plant equipment.• Ensure that the equipment attain minimum downtime as well as low breakdown occurrence particularly the Electro Forming Cells which composed of different auxiliaries like Gear drives, Pumps and Heat Exchanger.• Ensure also the… Show more • Assist Senior Mechanical Engineer in the implementation of preventive maintenance of production machineries• Oversees and follows-up the progress in critical maintenance work to minimize downtime.• Monitor performance of all operating plant equipment.• Ensure that the equipment attain minimum downtime as well as low breakdown occurrence particularly the Electro Forming Cells which composed of different auxiliaries like Gear drives, Pumps and Heat Exchanger.• Ensure also the good condition of Process and Utilities piping.• Apply engineering expertise in machine design, process design and installation• Uses AutoCAD extensively in designing new machine part and modification in preparation for the fabrication. Conducts inspection or buy-off on fabricated parts• Recommends and initiates appropriate solutions to existing engineering problems.• Responsible for evaluation of equipment failures and limitations.• Coordinates and supports the plant projects to completion according to the plant priority list.• Recommend and improvements/innovations to existing projects to promote cost reduction• Establish and promote safety practices• Involve in TPM Total Productive Maintenance and 5’s training• Handle spare parts control and inventory. Show less

• Support all clean-room equipment staff in major troubleshooting such as machine modification, design, system analysis and development for higher efficiency and reliability.• Draws-up plan for the designing of new machine, acquisition or ordering of new equipment, jigs & fixtures needed in Production or when setting-up a Production line.• Uses AutoCAD extensively in designing new machine and jigs & fixtures for the machines in preparation for the fabrication. Conducts inspection or… Show more • Support all clean-room equipment staff in major troubleshooting such as machine modification, design, system analysis and development for higher efficiency and reliability.• Draws-up plan for the designing of new machine, acquisition or ordering of new equipment, jigs & fixtures needed in Production or when setting-up a Production line.• Uses AutoCAD extensively in designing new machine and jigs & fixtures for the machines in preparation for the fabrication. Conducts inspection or buy-off on fabricated parts• Ensure that the equipment attain minimum downtime as well as low breakdown occurrence such as all assemble machine and testing machine.• Attends to the request or recommendation from other Dept/Div. on changes, modification & improvement of equipment that can have an impact on Quality and Productivity.• Participates and Attends important meetings, seminars, orientations and trainings that are geared towards machine improvement, new product or model and skill development • Supports the Company/Division/Department vision, goals and objectives. Show less