As Construction Quality Control Inspector, I was responsible to ensure quality on the construction project were met. My responsibilities included a wide variety of tasks related to projects and organizational development, including:•Serve as Construction Quality Control•Manager the performance of the Quality Control Plan•Provide continuous inspection of the work to insure compliance with the contract plans and specifications•Oversee implementation of a comprehensive set of Quality Measures•Witness / Verify QA/QC inspections NDE and testing.•Perform quality control inspections•Prepare QC reports from documentation for inspections and daily reports•Monitor daily construction activities and materials delivered to the site•Review, monitor and, respond to if necessary, all special inspection and material testing performed by third parties•Work with field supervision and subcontractors to enforce and maintain quality control standards•Ensure all work meets or exceeds the contract specifications and contractor’s standard of excellence•Ensure all materials meet or exceed the contract specifications•Manage client relationships and ensure customer satisfaction•Oversee quality control programs•Implement measurement based monitoring and verification plans and protocols, commissioning protocols, and associated post implementation operations & maintenance protocols* Kinder Morgan / GE; Compressor station in Hallettsville, Tx* Tesoro; Reactor internals Shop inspections (Woven Metals / Industrial Alloy)

Responsible for the in-process and pre-shipment quality assessment of subcontractor fabricated equipment, assessment of performance to schedule and when directed assist Project Coordinator in managing commercial relationship with subcontractor. Essential Responsibilities: Plan and implement quality activities for subcontracted equipment and fabrication. Included among these activities are the following: •Assessment of subcontracted equipment during all phases of manufacture at the fabrication facility. This assessment included dimensional and / or visual inspections of finished equipment, assemblies, subassemblies, parts and welds. ◦All assessments were in accordance with identified Codes, standards or other Quality Planning documents such as ITP’s or Inspection Checklist ◦Overseen the activities of 3 rd Party Inspectors employed to conduct Quality Control activities in accordance with Quality Planning documents. •Reviewed subcontracted equipment technical specifications. Assured the quality system requirements and manufacturing requirements reflect the customer requirements and included the technical specifications. •Conducted reviews and audits of supplier quality systems and programs. •Assisted Quality Engineers with development of Quality Planning documents including •Established written inspection plans for subcontracted equipment. •Coordinated and / or conducted subcontractor pre-production activities such as Preproduction Meetings, review of subcontractor manufacturing and quality control procedures. •Assisted with the expediting of purchased equipment including the following activities as directed by the Project Coordinator or Project Manager: •Assisted subcontractors in development of manufacturing plans to meet both quality and schedule objectives. •Assisted the Project Coordinator, as directed, in the execution of contract, including the following: Resolution of technical issues with Engineering or other appropriate technical entity

- Accountable for the safe and efficient execution of discipline related construction activities.- Coordinate all work direction and supervision across the contractor construction team, ensuring efficiency on a daily basis and confirmation that manning levels are adequate to support the 90, 30 and 14day lookahead schedules. Client and Contractor supervision needs to take place with “Boots on the ground and not behind a desk”.- Monitor and audit contractor and sub-contractor efficiency and compliance with safety standards and full adherence to the CABGOC SOP / SWP procedures.- Monitor and audit contractor and sub-contractor efficiency and compliance with safety standards and full adherence to the CABGOC SOP / SWP procedures- Facilitate delivery of a high standard of quality product, carried out in a safe manner, accurately reflects approved drawings and scope and minimize unnecessary re-work and or scope growth. It is important to the Project Leadership Team, that your position is setting a standard of achievement in all project deliverables and goals- Report on any indicated loss of performance which may result in a re-evaluation of the overall project schedule. Daily communication between the Construction Manager, Materials coordinator and Offshore Planner is key to success of the project. Always look for ability to accelerate schedule completion without compromising safety.- React to decisions of the Lead Superintendent in terms of work prioritization. If there is a need to do schedule recovery this needs the commitment of all leadership roles to be a success- Provided field oversight and verification of completed work on a daily basis

Currently at site on the Lianzi BBLT project. Block 14 Chevron Overseas Congo Ltd.• Review project Work Pack, referenced specifications, production schedules and approved Inspection and Test Plan prior to CONTRACTOR executing fabrication / inspection activities. • Initiated contact with the CONTRACTOR quality representative during Installation and Commissioning activities. • Conducted the inspection activities outlined in this assignment and verify compliance with the Work Pack, referenced specifications and the project approved Inspection and Test Plan.• Advised the CONTRACTOR quality representative, by verbal communication and in writing of any discrepancies observed during the Installation and Commissioning activities. The issues shall be communicated to the Lead Inspector through the use of the daily Inspection Report / Flash Report. • Submitted daily Inspection Report / Flash Report prior to the start of their next day shift. • Ensured that the CONTRACTOR complies with applicable CVX specifications, industry codes and Regulatory and Certification requirements.• Verified equipment and materials comply with approved drawings, P&ID’s and data sheets.• Reviewed and verified that CONTRACTOR endorses Material Test Reports (MTR’s), NDE reports, and all applicable testing reports.• Communicated all areas of concern to the Lead Inspector as they are identified via physical communication and via daily Inspection Report / Flash Report. • Issued Inspection Reports, Non-conformance Reports (where applicable), Inspection Release Reports and Punch Lists as required by the Inspection Assignment instructions. . • Ensured non-conformances are identified, tracked and closed out prior to acceptance of the work

Lianzi / Topsides project_ Chevron / CTSI Contractor• Senior Quality Advisor Assist/ advise project personnel in all matters relating to the application & implementation of company management system on projects.• Prepare/ maintain project specific quality documentation and Project Quality Plan.• Coordinate non-conformance management process within the project including reporting of all non-conformance reports (NCR), pro-actively facilitating NCR close out, identifying corrective action requirements etc.• Undertake project quality audits to measure project compliance with management system & client requirements and assess the effectiveness and value of established business processes.• Facilitate project lessons learned process to collate and report project experiences that may add value to ongoing & future projects.• Interface with Quality Control function to ensure appropriate levels of quality surveillance, inspection and control within applicable areas of project execution & delivery.• Provide quality management support to Supply Chain Management in respect of vendor & subcontractor assessment and risk management.• Liaise with Customer and third party representatives on matters relating to Quality Management within the project.• Facilitate customer feedback and performance measure processes on allocated projects Regional Responsibilities.• Utilize project experiences to assist in the development of the management system through identification of business process waste, NCR trends, implementation of revised business practice etc.• Contribute to the development of the regional audit process including planning, execution and reporting.• Contribute to regional "lessons learned" processes to facilitate continuous improvement within the organization.

• Lead, Plan and drive audit duties.• Generate notifications and arrangements with Shell Sponsor, Quality Lead, Audit Team and Auditee.• Execution of audit activities, conduct audit meetings. (Open/Close)• Perform audits and evaluated audit/test results, weighing the relevancy, accuracy and perspective of conclusions against the accumulated audit/test evidence.• Independently examine the procedures, processes, project specifications, systems and records, code and standards for conformity requirements of Shells suppliers and sub-suppliers.• Reviewed approval markings, critical drawings, documentation control, quality procedures and inspection, equipment calibration and product validation.• Establish a written audit report to define, collates, and evaluates the audit findings, observations and area of improvements. Including objective evidence.

Promote Quality awareness throughout the project•Ensure establishment and proper implementation of adequate control processes within the subproject PT, as stipulated in the Project Plan and the Project Quality Plan•Provide oversight of Contractor’s implementation of their Quality program and compliance with project requirements:-Approve Contractor’s Quality organization and monitor performance of key QA staff-Review Contractor’s standard contract and purchase order quality requirements language-Review and approve Contractor’s Quality Plan and Inspection and Test Plans (ITPs)-Perform scheduled periodic assessments of the Contractor's activities in order to evaluate and monitor implementation of Contractor’s Quality Management systems and documentation control-Participate in qualification of proposed Subcontractors or Suppliers-Ensure Contractor’s surveillance activities are commensurate with Criticality Ratings-Review Contractor’s quality audit schedule, monitor Contractor’s audit program, and participate in selected audits-Review Quality Plan of Suppliers of critical equipment / material in conjunction with PQC-Ensure Contractor is performing quality reporting per the contract-Monitor and audit implementation of PT Procurement and Construction Surveillance Programs•Develop and coordinate subproject Audit Schedule, conduct site audits within sub-projects and assist Quality Manager in conduct of project audits, as needed•Steward the Procurement and Construction Surveillance Programs until the respective coordinator (i.e., PQC, SQC) is assigned•Review and assist in development of Quality portion of site close-out reports as necessary•Ensure best practices and lessons learned are implemented and that new lessons learned are identified and distributed as required

•Promote Quality awareness throughout the project•Ensure establishment and proper implementation of adequate control processes within the subproject PT, as stipulated in the Project Plan and the Project Quality Plan•Provide oversight of Contractor’s implementation of their Quality program and compliance with project requirements:-Approve Contractor’s Quality organization and monitor performance of key QA staff-Review Contractor’s standard contract and purchase order quality requirements language-Review and approve Contractor’s Quality Plan and Inspection and Test Plans (ITPs)-Perform scheduled periodic assessments of the Contractor's activities in order to evaluate and monitor implementation of Contractor’s Quality Management systems and documentation control-Participate in qualification of proposed Subcontractors or Suppliers-Ensure Contractor’s surveillance activities are commensurate with Criticality Ratings-Review Contractor’s quality audit schedule, monitor Contractor’s audit program, and participate in selected audits-Review Quality Plan of Suppliers of critical equipment / material in conjunction with PQC-Ensure Contractor is performing quality reporting per the contract-Monitor and audit implementation of PT Procurement and Construction Surveillance Programs•Develop and coordinate subproject Audit Schedule, conduct site audits within sub-projects and assist Quality Manager in conduct of project audits, as needed•Steward the Procurement and Construction Surveillance Programs until the respective coordinator (i.e., PQC, SQC) is assigned•Review and assist in development of Quality portion of site close-out reports as necessary•Ensure best practices and lessons learned are implemented and that new lessons learned are identified and distributed as required

Project Inspection Coordinator: Responsibilities consist of coordinating all equipment inspection activities between projects and equipment manufacturers / suppliers. Ensuring inspection activities are completed within specified specifications, codes, standards and procedures. Maintaining a schedule matrix and record documentation to support inspection functions and Interface with all respective parties during the inspections process to ensure information was disseminated in a timely manner.Source Inspector; Responsibilities included shop surveillance for all mechanical equipment for CB&I projects. Project Quality Manager; Responsible for management and implementation of all inspection activities, to ensure that the construction activities were performed per the client’s specifications and required codes. Support activities on Orders to ensure that products or services provided are in accordance with customer and CB&I quality requirements. Also provided leadership for the development and implementation of QA systems, procedures, and related quality activities. Regularly interacted with representatives from a variety of functional groups, including program management, design/engineering, construction management, construction inspection, and testing personnel.Assignments have included:-Hunt Refining Company Hydrocracker project for the Black Warrior refinery in Tuscaloosa, Alabama.-Valero Unified Hydrocracker project for the Valero refineries at Port Arthur, Texas and Norco, LA.-Valero GFU projects for the Valero refinery at Port Arthur, Texas-Sunoco SRU /TGTU for Sunoco refinery at Toledo, -Petrotrin FCCU Upgrade #2 for Petrotrin refinery at Trinidad.-Imperial Oil Kearl oil sands project for Imperial Oil Calgary CA -Flint Hills Refinery SRU#3 – Phase#3 for FHR refinery at Corpus Christi.-Western Refinery CGHT project for Western refinery at San-Antonio, TX-Cartagena Refinery NHT expansion for Cartagena in Colombia

Project Quality Manager, Primarily responsible for the continuous improvement, trouble shooting and maintenance of the facilities Quality system and was the company resource for all quality matters. Ensured that all subordinates understand and follow policies and procedures with regard to the quality system and/or company as they apply. Maintenance and improvement of the quality system through routine system audits and corrective actions. Also ensured corrective actions whether internal or external are handled in a timely manner. Site lead system auditor or quality contact for all external or third party audits. Plan and directed the activities of inspection resources with the group supervisor to ensure consistent, reliable performance and timely response to internal and external needs. Primary authority for all internal nonconformance resolution. Carried out other general responsibilities as required by site management, Develop and analyze statistical data, and product specifications to determine present standards and establish and propose methods to achieve customer requirements, Identified new techniques, and technologies to be used in process control, inspection and calibration to improve quality, reduce inspection time and increase product throughout, Act as the company quality representative during regulatory audits.Assignments have included:-Lake Orion SRU project for Orion refinery at Norco, Louisiana.-Murphy Oil Desulphurization Plant for the Murphy Oil refinery at Superior, Wisconsin.-Premcor SRU (North and South plants) for the Valero refinery at Port Arthur, Texas-Praxair Hydrogen project for Motiva Enter. at Port Arthur, Texas -Praxair Hydrogen projects; Unit #3 and #4 Hydrogen projects for BP Amoco at Texas City, Texas

Project Quality Inspector; Performed routine to complex field and laboratory tests and inspections for purpose of verifying conformance to construction plans and specifications. Followed procedures, performed accurate computations, maintain cordial relationships with coworkers, clients, contractors, etc. Prepared daily reports. Prepared reports for review by supervisor prior to submittal to client. Provided training and mentoring to others. Assignments have included:-BP Amoco #11 and #12 Pipe Still revamp projects for the BP Amoco Refinery at Whiting, Indiana

Project Quality Inspector; Performed routine inspections on mechanical equipment. Overseeing the installation and inspection requirements of vessels, towers, Cooling towers, air coolers, drums, tanks, compressors, pumps and trays / internals. To ensure that the installation met the client specifications and required codes.Assignments have included:-Fina C4 Olefins project for the Fina refinery at Port Arthur, Texas

Project Quality Inspector; Performed routine inspections and test on mechanical equipment and piping.Assignments have included:-Premcor #2 reactor revamp for the Valero refinery at Port Arthur Texas.

Project Quality Manager, Responsible for management and implementation of all inspection activities, to ensure that the construction activities were performed per the client’s specifications and required codes. Support activities on Orders to ensure that products or services provided are in accordance with customer and CB&I quality requirements. Also provided leadership for the development and implementation of QA systems, procedures, and related quality activities. Regularly interacted with representatives from a variety of functional groups, including program management, design/engineering, construction management, construction inspection, and testing personnel.

Project Manager; Ensure that HSE requirements are documented and understood by all project participants. Compliance with HSE procedures. Maintain HSE focus for project duration. Customer Relationships: Identify, document and communicate the Customer requirements Proactively resolved performance, scope, cost and schedule issues with the Customer as they arise.Commercial Management: Effectively manage Company/Customer contract, including delivery of the budget.Scope Management: Managed an effective handover from the Business Development Group, Compliance with requirements of the contractEffective changed control process application. Manage and monitor project performance on a basis to ongoing basis to identify issues and opportunities early and take pre-emptive action. Effectively managed project interfaces.Time Management: Manage the planning of all scope elements of the project. Manage the design, procurement and construction activities to meet the project schedule. Manage the project schedule. Routinely monitored the key reports and development of corrective action plans. Timely and effective documentation turnover and project close-out.Cost Control: Plan and prepare accurate project estimates. Establish cost report for control of projects. Monitored and controlled all cost aspects of the project including forecasting costs, obtaining approvals, identifying trends, taking action to avoid cost overruns and identifying opportunitiesDeveloped a project schedule which allows work to be executed in a logical sequence. Team Management: Provided clear and focused leadership for the project team to create a vision for project success and a strategy to fit that vision.Communications Management: Accurate, timely & effective progress reporting to the Customer and internally to company management.

Project Quality Inspector; Performed routine inspections and test on mechanical equipment, soil, concrete, structural steel and piping.

Welder /Fabricator; Performed welding and fabrication in the field and shop on equipment, pipe spools and structural steel.Assignments have included:-Air Liquide Hydrogen Unit for the Valero refinery at Port Arthur, Texas.-BASF Sulfur Emissions project for SANDOS at Port Arthur Texas-Air Liquide ASU for Air Liquide at Longview, Texas-Premcor HU3 shut down for the Valero refinery at Port Arthur, Texas.-Mobil Oil Crude Oil Unit shut down for the Mobil Oil refinery at Beaumont, Texas.-A&B Builders Fabrication Shop.-Chevron Chemical Amine revamp for Chevron chemical at Orange, Texas-Waist Management Storage project for Waist Management plant At Sulfer, Louisiana