Rupesh Shah P. Eng. Email & Phone Number

Kitimat, British Columbia, Canada

• Working on Canada’s largest and world cleanest LNG facility.
• Primary accountabilities are working closely with LNGC maintenance, discipline, planning team and develop the maintenance procedure, work instructions and checklist for all LNGC instrumentation assets.
• Preparation of detailed Preventive Maintenance work instructions in AcceleratorKMS program based on RCM study and failure mode of the instruments.
• Well conversant with Digital Twin, ASSAI, i-Hawk program implemented by LNGC.

Fort Mcmurray, Alberta, Canada

• Feb 2020 to May 2022
• Working on U2 Engineering as built project at CNRL-Horizon Site.
• Walk-down in the plant, prepare field walk down package, review documents and mark up as-built P&ID Including instrumentation & control mark up.
• Review ControlLogix, Bentley Nevada and other PLC program and markup as-built information in the P&ID's.
• Stamping of As-Built P&ID’s.April 2019 to December 2019
• Worked on Albian Oil Sands Project – MRM CSL, JPM Inpit Cell 1 & MRM Inpit Cell 4.

Fort Mcmurray

• Project: Fort hills Secondary Extraction Project
• Providing engineering support for maintenance of the instrument asset base in Secondary Extraction to ensure that regulatory, production, and optimization objectives are met.
• Driving the development and coordination of instrument reliability improvement efforts, processes and systems.
• Providing guidance and direction for instrument maintenance in regards to reliability
• Assisting in implementing and maintaining reliability programs and processes: Defect elimination Predictive/Preventive Maintenance Plans, Criticality Analysis, SIS and associated metrics
• Championing MOC’s as they relate to Instrumentation

Calgary, Canada Area

• Project: Fort Hills Utilities & Secondary Extraction Project and Plant 39 Suncor Base Plant
• Consistent application and compliance in the project to Suncor technical standards, Industry standards, codes and regulations
• Provide technical guidance to Project area and EPCs for identifying optimal engineering solutions in the engineering development, interpretation & application of Suncor standards and resolution of issues
• Provide strategic direction to the EP contractors on I&C related engineering, interfaces and deliverables incorporating Suncor and Industry Standards.
• Ensure consistent Operations, Maintenance and Construction input into the design processes for all areas of the project
• Provide technical direction on I&C engineering scope items such as design criteria, control details, instrumentation sizing / selection, alarm management, PLC, SIS, DCS, BMS,, Fire and Gas detection,etc

Calgary, Canada Area

• Project: Pembina NGL Refractionation
• Detail Design of Siemens PCS7 Control & Safety systems
• Develop the Instrument Index, Shut down Keys
• Develop the Panel Design, IO Design etc.
• Participate in the HAZOP reviews

Calgary, Canada Area

• Project: Shell Quest CCS
• Project Co-ordination with Shell, Cybertech, Honeywell, Invensys for HAT, Module Yard Testing, Software Acceptance Test and final commissioning testing before Start up.
• Developed Modyard Test procedures on Shell Quest CCS Project and evaluated all control system tags to help Project engineering & operations in Jan 2014.
• Responsible for witnessing & sign off HAT, Module Yard Testing for DCS & SIS cabinets for Invensys & Honeywell.
• Participate in the design review with Shell project & operations for Finalizing the Process Control Narratives, C&E and Alarm List for Shell Quest Project.
• Responsible for witnessing Software Acceptance Testing at Cybertech.

• Project: Syncrude MLMR
• Project Co-ordination with Siemens, ABB, Mustang, AMEC, IORVL, Vendors and Sub contractors for Integrated FAT on E-Houses, Substations, Pump Houses, Caustic Building for MLMR Project.
• Coordinate Inspection at Module Yard with all the Stakeholders.
• Participate in weekly meetings with vendors, identify discrepancies and NCR’s and notify to concerned stakeholder for corrective action prior to Integrated FAT.
• Conduct Alignment meetings at Module Yard with all stakeholders prior to Integrated FAT to make sure attendees are aligned on Roles & Responsibilities, also all attendees are aware of approved specs, familiarize with.
• Management and Resolution of Punch list Items & RFI’s between all Stakeholders.

Calgary, Canada Area

• Project: Suncor Voyageur Upgrader ProjectJob Profile:
• Design of Fire Safety, Security & CCTV, System 1 MMS, CEMS & Gas System for Voyageur Project.
• Preparation of Proposal, Technical Bid evaluation & Purchase Order for above system.
• Preparation of contract specifications, kick-off meetings with vendors, vendor drawings/document review and approval, inspection, testing and expediting activities.
• Interface co-ordination with every Primary Engineering Contractor, Emerson, Consultants for Non-Process Buildings, client Suncor & Vendors for all matters related to above system.
• Review and approval of other engineering deliverables like P&ID, Instrument Index, Load list, data sheets, Cause & Effect diagram, cable schedule, Floor plans etc.

Fort Mcmurray, Alberta

• Supported small and medium size fire & Gas, security & HVAC automation project sales and project management for the Oil Sands site in Fort McMurray-Alberta region.
• Developed design, estimate, propose, negotiate, close and manage and complete the numerous automation, and control Project Solutions.
• Completed Numerous Training courses offered by Honeywell which include “Sales Essentials at Minneapolis”; “Breakaway Sales at Minneapolis, MN”; “Fire XLS 140/3000 at Atlanta-GA“; ”Project Manager SAP Training at.
• Worked with Oil sand’s operations/Fire/Corporate Security group & provided solutions
• Developed extensive client relationships and leveraging existing contract base
• Worked closely with Field Service Leader and field technicians in local branch

• Design of Fire Alarm, Security & CCTV System for Voyageur Project.
• Design of Fire & Security Control Rooms, selection and Procurement of equipments for Control Room
• Preparation of Proposal, Technical Bid evaluation & Purchase Order for above system.
• Preparation of contract specifications, kick-off meetings with vendors, vendor drawings/document review and approval, inspection, testing and expediting activities.
• Preparation of Engineering and Construction work packages by organizing detail design information and documents in order to release it to project for construction.
• Interface co-ordination with every Primary Engineering Contractor, Emerson, Consultants for Non-Process Buildings, Client Suncor & Vendors for all matters related to above system.

• Develope the specifications, design criteria, and the functional requirements for the control systems of the facility. The control system included “YOKOGAWA” PLC’s networked with “DATAC” SCADA HMI's using Real Flex 6.
• Preparation of Instrument Index, Specification and Datasheets for Instrumentation as well as inviting budgetary quotes and preparation of Technical Bid Evaluation.
• Commissioning of SCADA ( M/S DATAC) & PLC ( M/S YOKOGAWA) in 15 Sub Centers & Control Center
• Liaison & support SCADA & PLC vendor to finalize control system logic, reports, mod bus mapping, graphics etc.
• Successful completion of IFAT( Integrated Factory Acceptance Test) which includes Radio and Communication Equipments, PLC & SCADA
• Design & Preparation of Change over Procedures & Operating Procedures

• Review of all Engineering Drawings and Specifications
• Preparation of Instrument Specification and Datasheets, instrument RFQ/PO Packages, vendor data, participation in P&ID reviews, review of control narratives and cause & effect diagrams
• Preparation of new database system to control the project cost, manpower, machinery, equipment
• Review and planning of Manpower mobilization
• Approval of Installation & Inspection procedure of Electrical & Instrumentation discipline
• Planning and controlling the Budget, equipment, manpower etc.

• Preparation & Approval of Quality control/Inspection & test plan and Procedures of Instrumentation & Electrical Discipline
• Preparation & review of Instrument Specification, Datasheet, QAP, Test Procedures
• Looking after quality assurance and & Technical support of all Projects listed above
• Liasioning with Client, Project Management consultant (EIL) and other Third party Inspection Agency like CEIL, LRIS, DNV,TUV, ABS etc. for inspection coordination
• Sort out any technical Problems arising at vendor’s works or at Project Site
• Carrying out Inspection of Instrumentation & Electrical items at vendor’s work as Third party inspection Agency

Instrumentation & Control, Instrumentation, First Class

Mba, Finance, First