Sahdev Kumar Email & Phone Number

Sirsa, Hr, In

Manager in M/s Engineers India Limited, Nigeria at Dangote Oil Refinery Company (world’s largest single train refinery), Nigeria. and IOCL Panipat Haryana India -Project – AS a PMC/EPCM Competent, diligent, and result-oriented Mechanical QA/QC Manager offering over 15 years of experience. Part of different projects. & experienced to handle different types of composite work of vendors, EPC, EPCM & client for successfully are the biggest achievements in career. I can work in a challenging atmosphere & as a team player handle the Fabrication, and stage inspection of AG/UG piping & piping system Like Sulphur , caustic, Amine cryogenic, etc., Tanks, Pressure vessel ,Pump, compressor etc. with different materials (CS, AS & SS, Inconel, aluminium, ect. ), Fit-up, welding, WPS & WQT control, QA/QC confirmations with maintaining all safety precautions. Stage-wise inspection, Pre-commissioning & Commissioning activities of entire systems. Have the Sound knowledge in code follows like API 570,API 510,API 571, API 650, API 1104, ASME SEC. II,V,VIII,IX B31.1,B31.3 & B31.8,B16.5 etc. & site requirements, interpretation of code & standard understanding, familiar with modern latest NDT (UT, RT, MPT, and PT & VT) met hold & technology with their interpretation & documentation

Bathinda, Punjab, India

 Taking care of overall site construction quality of BBU & BBU Tanks unit in (HMEL Bathinda) Performed the implementation of the site Quality Plan and all procedures and specification concerning the inspection of the project Inspection of HOT Tapping at various Stage.  Resolving the vendor technical queries during manufacturing, and doing follow up with all concern team To ensure that complete fabrication work is done in accordance with the approved drawing and stage inspections as per the approved QAP. Day to day Co-ordination and regular inspection activities with vendor/ contractor. Responsible for preparing final documentation as per project requirement. Conducting NDT inspection as per QAP requirement. To assist with establishment, effective implementation and monitoring of the health & safety culture. Inspection of surface preparation / painting at 1st coat, intermediate & final stage. Verifying DFT as required in approved painting procedures. Reviewing and approval of final quality dossier send by vendor/contractor  Responsible for erection, installation & inspection of various equipment & vendor packages according to the required standards and ITP Requirements.  Proactively involved in resolving the site engineering issues and other issues related to material etc.  Expediting vendor/contractor on day-to-day bases. Monitoring the work progress at Key Milestones and Key Performance index to maintain the project progress at steady pace.  Review of line history sheet for Loop clearance and Test packs Co-ordination with client for Formats & there punch points. Coordinating, witnessing and reviewing NDT works like RT, UT, PT, MPT, Auto UT Reviewing LHS and hydro test package for system completion. Habitual with process safety and ability to find hazards in work for running and construction site

Bpcl Kochi

 Preparation of WPS, PQR, QAP, ITP & Job procedure as per CODES, Specification OR as per project requirements  Witnessing WQT, Monitoring welder performance as per project requirements. Material identification and verification of material test certificates. Fit up inspection, visual inspection of welds and preparing of daily welding reports. Verify the use of correct material as per the requirements or as per Construction drawing. Witnessing pre heating and post weld heat treatment. Prepare all inspection reports for the activities inspected as per the requirements of the quality plan. Review of line history sheet for Loop clearance and Test packs. Co-ordination with client for Formats & there punch points. Coordinating & conducting NDT works like RT,UT,PT,MPT, Auto UT,. Preparing of welder performance matrix. Preparing LHS and hydro test package for system completion. Review of quality related documents like NDT Reports etc. at vendor shop or construction site for in- process and final product. Supervising welding activities in fabrication shop and erection site. Regular Maintaining & checking Baking & control register different type of electrodes  Conversant with welding process like SMAW, GTAW, FCAW, etc.  Performed the implementation of the site Quality Plan and all procedures and specification concerning the inspection of the project. Successfully coordinated for Quality inspection matters liaising with sub-contractor management and work force. Reviewed and ensured that appropriate consumables were distributed to welders in order to make sound weld. Inspected dissimilar metal joining such as stainless steel to carbon steel & different alloys; qualification & performance monitoring of welding personnel. Responsible for erection, mechanical clearance, testing & box up activities various process lines in the refinery area.

Opal Baruch

 Preparation of WPS, PQR, QAP, ITP & Job procedure as per CODES, Specification OR as per project requirements  Witnessing WQT, Monitoring welder performance as per project requirements. Material identification and verification of material test certificates. Fit up inspection, visual inspection of welds and preparing of daily welding reports. Verify the use of correct material as per the requirements or as per Construction drawing. Witnessing pre heating and post weld heat treatment. Prepare all inspection reports for the activities inspected as per the requirements of the quality plan. Review of line history sheet for Loop clearance and Test packs. Co-ordination with client for Formats & there punch points. Coordinating & conducting NDT works like RT,UT,PT,MPT, Auto UT,. Preparing of welder performance matrix. Preparing LHS and hydro test package for system completion. Review of quality related documents like NDT Reports etc. at vendor shop or construction site for in- process and final product. Supervising welding activities in fabrication shop and erection site. Regular Maintaining & checking Baking & control register different type of electrodes  Conversant with welding process like SMAW, GTAW, FCAW, etc.  Performed the implementation of the site Quality Plan and all procedures and specification concerning the inspection of the project. Successfully coordinated for Quality inspection matters liaising with sub-contractor management and work force. Reviewed and ensured that appropriate consumables were distributed to welders in order to make sound weld. Inspected dissimilar metal joining such as stainless steel to carbon steel & different alloys; qualification & performance monitoring of welding personnel. Responsible for erection, mechanical clearance, testing & box up activities various process lines in the refinery area.

Bathinda, Punjab, India & Ongc Uran

Preparation of WPS, PQR, QAP, ITP & Job procedure as per CODES, Specification OR as per project requirements , Witnessing WQT, Monitoring welder performance as per project requirements. , Material identification and verification of material test certificates. , Fit up inspection, visual inspection of welds and preparing of daily welding reports.  Verify the use of correct material as per the requirements or as per Construction drawing.  Witnessing pre heating and post weld heat treatment.  Prepare all inspection reports for the activities inspected as per the requirements of the quality plan. , Review of line history sheet for Loop clearance and Test packs. , Co-ordination with client for Formats & there punch points. , Coordinating & conducting NDT works like RT,UT,PT,MPT, Auto UT,. , Preparing of welder performance matrix.  Preparing LHS and hydro test package for system completion.  Review of quality related documents like NDT Reports etc. at vendor shop or construction site for in- process and final product. , Supervising welding activities in fabrication shop and erection site. , Regular Maintaining & checking Baking & control register different type of electrodes , Conversant with welding process like SMAW, GTAW, FCAW, etc. , Performed the implementation of the site Quality Plan and all procedures and specification concerning the inspection of the project.  Successfully coordinated for Quality inspection matters liaising with sub-contractor management and work force.  Reviewed and ensured that appropriate consumables were distributed to welders in order to make sound weld.  Inspected dissimilar metal joining such as stainless steel to carbon steel & different alloys; qualification & performance monitoring of welding personnel.  Responsible for erection, mechanical clearance, testing & box up activities various process lines in the refinery area.

B.Tech Mech.Engineer, Mechanical Engineering, 1St

Qms & Welding, 1St

Cswip 3.1, Welding, 1St

Magnetic Particle Testing, Liquid Penetrant Testing., Radiography Testing, (Paut & Tofd) Ultrasonic Testing,, 1St

Api 510, A

Api 570, A

B.Tech Mech Engineer, Mech. Engineer, 1St

Mechanical Engineering, 1

API 650