* Information System Security Officer (ISSO) to ensure a proper security posture is in place.* Supporting multiple programs at Systems Simulation Software & integration Directorate (S3i) [Formerly AMRDEC/SED], including and ACN (AirCraft Notebook), Patriot LDE (Launcher Development Environment), STAMP (Smart Tool 4 Aviation Maintenance Picture), GCSS-Army Aviation Integration Services (AIS), and Precision Fires Manager (PFM).* Wrote CCI (Control Correlation Identifier) responses for the RMF package in eMASS.* Reviewed and submitted STIG Checklists (Ckl) and uploaded artifacts into eMASS.* Reviewed CCI’s to gather hardware and software requirements for a Classified lab.* Requirements and documentation to place the test lab into the AvMC Zone B network.* Submitted a BOM (Bill Of Materials) for a RFP (Request For Proposal) on the CHESS site.

* ACN Fielding support, traveled 50% of the time to multiple sites to set up the router, switch, and troubleshoot local network issues.* Optimized Wireless network performance at Army Aviation Units that utilized the CAISI or Aruba systems.* Systems Solution Engineer for the Deployed Tactical system, research, selection, and documentation of multiple solutions. Design, network verification testing, training materials, documentation, and security of the infrastructure, including servers, workstations, routers, switches, and wireless access points.* Installation, configuration, administration, and troubleshooting of the Deployed Tactical system, Including Cisco and Juniper routers, switches, CAISI (Combat Service Support Automated Information Systems Interface), VSAT (Very Small Aperture Terminal), Windows 2008 R2, Windows 7, storage devices systems, and backup software.

* Leading a team of IT Professionals, in support of the Aviation Automated Logistics (AAL) group of over 90 users.* System Engineer for the Deployed Tactical system, including design, network verification testing, training materials, and security of the infrastructure, including servers, workstations, routers, switches, and wireless access points.* Installation, configuration, administration, and troubleshooting of the Deployed Tactical system, Including Cisco & Juniper hardware, CAISI (Combat Service Support Automated Information Systems Interface), VSAT (Very Small Aperture Terminal), Windows 2008 R2, Windows 7, storage devices systems, and backup software.* System Engineering for the Deployed Systems, RAID Configurations, Hardware specifications and configurations.* System Design (hardware, software, and peripherals)* IT Project Management duties for multiple Government software projects within our AAL group.* Personnel duties, review resumes, interview potential candidates.* Develop a yearly budget for the IT department* Purchasing, request, review, and submit vendor quotes. Write up justifications for purchases for the Army Goal 1 Waiver process.* Vendor management, negotiating pricing, requesting evaluation hardware, warranty and post warranty repair or replacements.* Logistics/Project Management, responsible for the move from Bldg 7650 to 106 Wynn Drive, including IT Hardware, servers, switches, Sonicwall firewall/router.* Configured, installed, and maintained Network Backups using HP DataProtector, HP 1/8 G2 Autoloader via a Fiber SAN.* Designed, Installed, Configured, and Documented the new DEV Network Infrastructure to meet DoD regulations and to gain an ATO (Authority To Operate)- WhatsUpGold, KiwiSyslog Server, and SonicWall NSA 240, installed and configured- Netgear GSM7352S Switches, installed, configured, including per device VLANS- NTI Network Technologies Inc, ENVIROMUX-SEMS-16, Installed and Configured

* Supporting several organizations within the MDA (Missle Defense Agency) at the MDDC (Missle Defense DataCenter)* Perform preventive maintenance on operating systems (Windows XP, 7, 2003, 2008) and repair system/environment problems.* Supporting the Active Directory Infrastructure configuration and management.* Responsible for networking configurations and engineering on Cisco switches and routers.* Configured Brocade and Qlogic SAN switches* Supporting the MJAT (Mobile Joint Analysis and Test) infrastructure composed of Windows Servers and Laptops and Linux Laptops. Additional Microsoft and third party applications including SQL Server (2005, 2008) Visual Studio (2008, 2010), MARS (Modular Analysis and Reporting Suite), NSITE (Network System Integration Test Environment) and other MDA specific applications.* Implementing, managing, and monitoring enterprise windows infrastructure.* Responsible for server and desktop configurations, Microsoft products and technologies, and third party applications.* Supported the Datacenter move from 106 Wynn Drive to Von Braun III, including 32 server racks, 8 UPS racks, and 650 TB of storage, and numerous Cisco switches and routers. Complete Shutdown to Power up in 108 hours for all systems.

Providing support for Military Flight Operations Quality Assurance (MFOQA), Consolidated Aviation Maintenance Software Suite (CAMMSS), Electronic Life Usage Management System (ELUMS), and the Condition Based Maintenance (CBM) projects.Responsible for the design, installation, configuration, administration, security and troubleshooting of LAN/WAN infrastructure. (Including Cisco routers, switches and the CAISI and VSAT systems.)Develops, deploys and maintains network plans.Assists with network verification testing.Responsible for the daily administration, maintenance, installation and general support of project Network Services.Provides 3rd level Network support for the team and other projects as needed.Responsible for research, identification of emerging network technologies and security best practices.Using VSS (Visual Source Safe) and EA (Enterprise Architect) I created the MFOQA system requirements and system design documentation.Designed and configured a Test and Integration lab consisting of three Cisco 3560's and three Cisco 2821's to simulate four network with WAN links.Installed and configured automated user data file back from workstation to server using Microsoft SyncToy 2.0 and a BAT file scheduled to run as a Logon/Logoff script in GPEDIT.mscConfigure, install, and maintain Symantec BackUp Exec and Ghost products.Maintained an Excel spreadsheet to track IP addresses, system names, serial numbers, and support contracts.Using Visio, I created and maintain the Infrastructure diagrams.

Responsible for 1,500 local users, 4 remote sites, and 4 VPN connections to Partner companies. WAN circuits include multiple T1's and 2 redundant DS-3's.Successfully installed, configured and mapped WhatsUpGold v11, including paging, SNMP reports on CPU, Memory, disk, and Interface utilization for network and server hardware.Installed and configured Kiwi Syslog Service Manager with separate displays for Cisco, Cisco Access Points, APC equipment, Windows Servers, and UNIX Servers.Installed and configured Cisco network analysis modules (NAM). Implemented automated NAM reports.Supporting the LAN and WAN consisting of over 160 Cisco devices (2900, 3550, 3560, 3750, 3845, 4506, ASA5520 & 6509 series), Wireless Access points from Cisco (1220, 1232, 1242) and Intermec (wa21), APC Smart-UPS and Symmetra 6kva & 12kva units, Dell PowerEdge 1655MC network switches, Fast and Gigabit Ethernet.Converted the Partner VPN connections from a Cisco 1721 to a Cisco ASA5520.Responsible for configuring, maintaining, and reports for network applications including: CiscoWorks 2.2, APC InfraStruXure Manager, Crannog Netfow Trakker, Esker LANFax, and SurfControlConfigured SurfControl to stop user traffic to internet sites that were not business related that were consuming large amounts of bandwidth. With the elimination of this internet traffic, average daily utilization of the Internet pipe was reduced to an average of 60% from 95% saving the company from the purchase of an additional T1.

Responsible for meeting the contracted levels of System Availability of the I3MP (Installation Information Infrastructure Modernization Program) CUITN (Common User Installation Transport Network) Network for all hardware, software, fiber optics, and cable huts.Successfully completed the SAT (Systems Acceptance Test) under supervision of the TIC (Technology Integration Center) Engineer. Verified the new routed Gigabit Ethernet backbone infrastructure met the design requirements, including verification of HSRP and EtherChannel failover.Successfully completed the ST&E (Security Test & Evaluation) Audit, secured ports on the NMS, updated router configurations, passwords, and community strings, received ATO (Authorization To Operate) recommendation.Supporting the CAN (Campus Area Network) consisting of 217 Cisco devices (3750, 4506, & 6509 series), APC Symmetra 6kva & 12kva units, HPOV NNM 7.01, CiscoWorks 2.2, APC PowerNet SNMP Manager. Including patches, updates, security, and configuration changesDiagnosing and resolving network hardware and configuration problems including Cisco RMA's and OSPF routing.

As a member of BAE's Network Engineering Group I supported government and commercial organizations with network assessments, network design, network implementation, network operations, and problem resolution. My broad background and depth of knowledge allow me to identify issues that should be addressed due to proposed changes, and to ensure a successful implementation. Projects included:Network infrastructure assessment, design, and installation of a Gig E solution to replace the legacy ATM network for; Proposal to In-source the BAE Systems helpdesk and NOSC, including staffing, equipment, facilities, and tools.- Created an RFP for a new MPLS network for the corporation. I then Reviewed, Analyzed, and Evaluated responses to the RFP that was sent out to major telecom carriers.- Installation of TACLANES on the SIPRNET network at Eglin AFB.- Respond to government RFP's including the CITS equipment under NETCENTS and the ARMY TEIS 2.- Using MicroSoft Project to outline projects, to develop a schedule, and to calculate labor hours required.

Working as a Sub-contractor for General Dynamics performed a through network infrastructure assessment and design of a Gig E solution to replace the legacy ATM network for the US Air Force at Misawa Japan.

Supported an International WAN of over 60 locations and 4,500 end users. Responsibilities included engineering, cost estimate, implementation, and documentation packages required to meet the companies requirements.Solutions included T1s, VPN’s, Frame Relay, and 400+ Mbps trunked Ethernet. Nortel, Cisco, and Enterasys switches were used over a Fast Ethernet and Gig E network.Played a key role in the re-engineering of the SAP infrastructure to a new Fast Ethernet and Gig E backbone, replacing the CDDI network.Implemented procedures to bring all routers up to a standard configuration. Evaluated network hardware and software and implementing enterprise standards based on the assessment.Administrator of the Network troubleshooting tools including Spectrum, Network Vantage, and Sniffer Pro. Other responsibilities included supporting the Avaya Definity and Audix systems as well as the design, implementation, and support of a Polycom ISDN based Video conference network.

Supported a LAN/WAN with over 4,000 sites, running TCP/IP, Frame Relay, Multidrop 56k, and ISDN.Troubleshooting with Netview 6000, 3610 Network Monitor, 6510 Analysis, Timeplex, and our Gateway monitor. Utilized information to restore and improve network performance.Configuration of AT&T Paradyne 3610 Modems and Timeplex connections when rolling out new branch offices.Supporting new installations, existing sites, and National City's Online Banking application, to ensure network availability and performance.Maintaining the Money Access ATM Network (MAC) and verifying Poll Codes, to restore service to customers.Using 3DV, proactively troubleshooting the Cisco TCP/IP Network. Utilized information to open tickets on circuits and hardware to resolve issues before the customer was impacted.Qualified in vendor management, including coordinating teamwork among vendors to restore service in a timely fashion, ensuring customer satisfaction and maintaining corporate interests.

Supported a network of over 1,200 sites, including offices and ATM's.Troubleshooting the network of X.25 Pads, ASYNC, SNA, Modems, servers, controllers, and security devices to guarantee network availability.