Samuel Leopard Email & Phone Number

Montgomery, Alabama, United States

Montgomery, Alabama

*Performed calibrations and or repairs on the following equipment using approved procedures in acontrolled laboratory environment in the Precision Measurement Equipment Laboratory located at Maxwell AFB-Gunter Annex:*Physical and Dimensional Equipment:Force and tension gages, Aircraft Cable Tensiometers, Torque Devices, weighing scales (wheel weighingscales), Analytical Balances/Scales, Physician Scales, Cargo Scales etc, micrometers, calipers, pressuregages, inflator kits, pressure relief valves.*Electronic Equipment:Digital and analog multimeters, other devices that measure or output resistance, AC-DC Volts, AC-DCCurrent, capacitance, freqruency,

Burkburnett, Texas

Assistant Manager in Training. Assist the Store Manager in the day to day operations of a convenience store (7-11) open 24 hours.

Wichita Falls, Texas Area

The following is the activites related to the Weekend Sweeper Truck Driver areas of responsibilities:*Used a leaf blower to blow trash off the different areas of the customer's property into a position of the parking lot to sweep up with the sweeper truck. Manually pick up some the trash to dispose of it properly. The customers that I service are Walmarts, Home Depot, and other shopping centers. The main headquarters of the business is located in Abilene, TX.

Sheppard Afb, Tx, Fmo (Furnishings Management Section), Wichita Falls, Tx.

As the Warehouse Project Manager (Program Manager for Furnishings Management Office contract at Sheppard AFB, TX.), I was responsible for all areas of the operation and contract locally.*Achieved financial objectives by preparing an annual budget; scheduling expendenitures; analyzing variances; initiating corrective actions.*Managed 6 personnel in the Furnishing Management Office.*Completed warehouse operational requirements by scheduling and assigning employees; following up on work results.*Reviewed and approved payroll timesheets.*Participated in hiring, firing, and other counseling responsibilities related to personnel. *Performed Facility Manager Responsibilities.*Performed Government Funded Equipment Responsibilities.*Worked closely with the Assistant Program Manager (employed by subcontractor/partner) to plan, coordinate, and conduct projects as well as daily work orders as required.*Participated in contract related discussions between Government Contracting Officer, Housing CORs, and Contractor Management.*Performed Annual and Semi-Annual Inventory of all furniture and appliances located in about 23 Buildings/Dorms and 6 warehouses/storage areas.*Maintained receiving, warehousing, and distribution operations by initiating, coordinating, and enforcing program, operational and personnel policies and procedures. *Complied with federal, state, and local warehousing, material handling, and shipping requirements by studying existing and new legistation; enforcing adherence to requirements; advising management on needed actions.*Safeguarded warehouse operations and contents by establishing and monitoring security procedures and protocols.*Controlled inventory levels by conducting physical counts; reconciling with data storage system.*Maintained physical condition of warehouse by planning and implementing new design layouts; inspecting equipment; issuing workorders for repair and requisitions for replacement.

Sheppard Afb, Tx Pmel, Wichita Falls, Tx.

Managed all areas of the Precision Measurement Equipment Laboratory located at Sheppard AFB, TX. in Wichita Falls, TX.:*Managed the PMEL from “AFMETCAL Certification Withheld” status to “AFMETCAL Certified” status in November 2006*Managed the PMEL to retain “AFMETCAL Certified” status in January 2008, January 2010, and February 2012*Managed the PMEL to passing the IG UEI PMEL (AFMETCAL) portion after revisit in February 2015 (did not pass all of the IG UEI PMEL portion during original visit in May 2014)*Maintained PMEL contract requirements for the daily workable backlog average and daily total backlog average for each month *Participated in the development and maintenance of the Sheppard AFB PMEL Quality Manual and several continuity books*Participated in the development and maintenance of PMEL training records and restructuring of the contractor training matrix for PMEL*Participated in contract related discussions between the Government Contracting Officer, Government Quality Assurance and Contractor Management*Responded to Government QAE/COR 2 write-ups*Worked closely with the PMEL production control section to ensure the scheduling and pickup and delivery functions met contract requirements*Worked closely with the PMEL Lead Technician and PMEL Quality Assurance to ensure production and quality goals were met and resolved any differences between the two *Used PAMS to generate required management reports*Monitored all Root Cause Analysis functions*Monitored all Trend Analysis functions*Monitored all Internal Audits and Self Inspections*Performed Management Reviews*Performed CA/CRL account and Government Funded Equipment Responsibilities*Performed Facility Manager Responsibilities*Performed Records Custodian Responsibilities*Performed positive behavioral reinforcement sessions with PMEL personnel under Union presence as needed or required*Assisted with Recruitment of new employees*Reviewed and approved weekly payroll time sheets

Tinker Afb, Ok. Pmel, Oklahoma City, Ok.

*Performed calibrations and or repairs on the following equipment using approved procedures in a controlled laboratory environment in the Precision Measurement Equipment Laboratory located at Tinker AFB, Oklahoma City OK.:*Physical and Dimensional Equipment:Force and tension gages, load cells, weighing scales (truck and aircraft), dial indicators, micrometers, pin gages, calipers, pressure gages. inflator kits.Calibrated and Repaired Test Measurement and Diagnostic Equipment.

Tinker Afb, Ok Pmel, Oklahoma City, Ok.

*Performed calibrations and or repairs on the following equipment using approved procedures in a controlled laboratory environment in the Precision Measurement Equipment Laboratory located at Tinker AFB, Oklahoma City, OK.:*Electronic Equipment:Digital multimeter calibrators, resistance, capacitance, voltage, and current instruments; Digital and analog multimeters, panel meters, and differential voltmeters.*Physical and Dimensional Equipment:Force and tension gages, load cells, weighing scales (truck and aircraft), dial indicators, micrometers, pin gages, calipers, pressure gages. inflator kits.

Department Of Energy (Doe) Pantex Facility, Amarillo, Tx

As the Metrology Dept. Electronic Lab Supervisor and Metrology Dept. Training Coordinator, I was responsible for all areas of operation of the Electronic Lab and Training Area.*Performed the following duties:*Metrology Dept. Electronic Lab Supervisor:*Supervised nine sub-ordinates.*Assigned workload to appropriate lab sections.*Monitored workload from time of scheduling until calibration completion.*Resolved production problems.*Performed quality review of all calibration documentation within the Electronic Lab.*Reviewed and approved weekly payroll time sheets.*As a Facility Manager, submitted work orders to appropriate maintenance department for facility repairs and other environmental control problems.*As a Radiation Source Custodian, monitored and accounted for all radiation sources under electronic lab custody.*Managed and Coordinated hazardous waste process within the Metrology Dept. with the Division Level Waste Dept.*Metrology Dept. Training Coordinator:*Managed Metrology Dept. Training Program.*Performed job training analysis.*Managed all Metrology Dept. Training Matrixes within the Training and Development Technology TRAC Database.*Scheduled Metrology Dept. personnel for all required training.*Developed and Maintained Metrology Dept. DOE required Qualification Courses.*Completed and reviewed all training documentation associated with Training in the Metrology Dept.

Faa Facility, Oklahoma City, Ok

*Performed calibrations and or repair on oscilloscopes for Federal Aviation Administration in the Metrology Dept. located in Oklahoma City, OK. Duties included diagnosing equipment problems, locating failed components, researching information on parts, replacing failed components, performing calibration of unit, and completing necessary paper work.

Clive Incineraton Facility Near Salt Lake City, Ut.

*Received initial training on the basic operation of a hazardous waste incineration system. Assigned to research information on specific systems and developed general maintenance and training guides. Performed daily inspections and monitored progression of assigned systems.

Salt Lake City, Ut.

*Provided calibration services to industrial plants and smaller companies involved in a variety of areas.Duties included the following:*Preparation of standard equipment, reaffirming set appointments and rescheduling appointments if needed, performing calibrations on production line measuring equipment and systems, and performing customer relations.*Performed calibrations and or repairs on the following equipment:Field Service: temperature controllers/recorders/indicators and sensors, ovens; pressure transducers and indicators; vacuum and pressure gages and systems; panel meters; flow meters; humidity chambers; timers; megohmmeters; x-y recorders; balances and scales; optical comparators; toolmakers microscopes; tension and force machines.*In Laboratory: Electronic Equipment – DMM calibrators, resistance, capacitance, inductance, voltage, and current instruments. Digital and analog multimeters, panel meters, and differential voltmeters.*Physical and Dimensional Equipment - gage blocks, ring gages, calipers, micrometers, dial indicators, pin gages, weights, pressure gages, and force gages.*Performed Swing Shift Supervisory Duties.Calibrated and Repaired Test Measurement and Diagnostic Equipment in a Metrology Lab as well as at customers location. Performed supervisory responsibilities.

George Afb. Ca. Aage/Pmel Victorville, Ca

(PMEL) Precision Measurement Equipment Laboratory Technician, Avionics Aerospace Ground Equipment Specialist F-4/RF-4. Served permanent assignment at George AFB, Victorville, CA. Rank E-4 Sergeant.*Precision Measurement Equipment Laboratory Specialist Duties:*Performed calibration and/or repair of electronic standards and electronic instrumentation associated with resistance, voltage, current, capacitance, pressure and force, vacuum, and temperature. Performed supervisory duties as required and trained new personnel entering this career field. *Avionics Aerospace Ground Equipment Specialist Duties:*Performed calibration and/or repair of avionic support equipment associated with the F-4/ RF-4 Fighter Jet.*Trained new personnel entering this career field.

Bachelor Of Science (B.S.) Awarded In August Of 1991, Electronics Management, 3.75

Certificate Of Training, Physical Measurement And Calibration Course United States Air Force, Passed

Learned all aspects of Physical Measurement and Calibration.

Associate Of Science - As, Electronics Technology, 3.5

Certificate Of Training, Avionics Aerospace Ground Equipment Specialist Course (F-4/Rf-4) United States Air Force, Graduated With Honors, Passed

Learned all aspects of Calibration and Repair of Avionics Aerospace Ground Support Equipment for F-4/RF-4.

Certificate Of Training (Part Of High School Curriculum Junior, Senior Years), Industrial Electricity, Passed

Learned all aspects of Industrial Electricity.