•Confirmed that the final product complies with the IEC standards and the client technical Specifications.•Managed the production line considering the time, cost, and quality factors.•Following up on the production process.•Trouble shooting any problem during the production process.•Applying the quality liability & quality philosophy to all production staff.•Applying the statistical tools for analyzing product-related inspection and testing data.•Discussing on daily bases with quality control manager & senior quality control the product defects to prevent and•reduce the cause of defect occurrence.•Ensured the availability of all measuring equipment & inspection instruments needed for in-process inspection.•Ensured competence, accuracy, suitability, calibration, and the validity of all used measuring equipment and inspection tools.•Monitoring and measuring the defect & scrap related cost concerning the in-process product to reduce bad quality•Used the six sigma as statistical tools to improve the process quality & release defects.•Used the approach of lean manufacturing to improve the in-process inspection.•Ensured that all products under processing are produced according to their related specs.•Managed the customer complaints and tried to solve the problems as fast as possible.•Prepared customer satisfaction reports regarding customer service complaints.•Provided suggestions for the development of the company's products.•Testing, Installing and commissioning of medium voltage and low voltage equipment (MV switchgear, LV switchgear: MCCs, ATS, MDB, SMDB, and other switchgear products like capacitor banks).•Installing and commissioning of motor starting systems (VFD, Soft Starters) and power systems integrations.•Testing and commissioning for protection relays.•MV (RMU & KIOSK) & LV Switchgear Panel as QC Engineer And Able To Follow Quality Standards And Set Quality Standards in All Aspects Of Production Line (Assembly, Testing, and Commissioning

• Managed the production line of main ring units up to 22 KV for both types: Air RMU type (F&G) and SF6 RMU Type (ABB).• Managed the production line of package substations up to 22 KV & up to 2 MVA with low voltage main circuit breaker up to 4000A.• Managed the production line of low voltage distribution panels up to 4000A & non-standard• panels up to 2500A type (Teba).• Confirmed that the final product complies with the IEC standards and the client technical Specifications.• Managed the production line considering the time, cost, and quality factors.• Following up on the production process.• Trouble shooting any problem during the production process.• Applying the quality liability & quality philosophy to all production staff.• Applying the statistical tools for analyzing product-related inspection and testing data.• Discussing on daily bases with quality control manager & senior quality control the product defects to prevent and• Reduce the cause of defect occurrence.• Ensured the availability of all measuring equipment & inspection instruments needed for in-process inspection.• Ensured competence, accuracy, suitability, calibration, and the validity of all used measuring equipment and inspection tools.• Monitoring and measuring the defect & scrap related cost concerning the in-process product to reduce bad quality cost continuously.• Used the six sigma as statistical tools to improve the process quality & release defects.• Used the approach of lean manufacturing to improve the in-process inspection.• Ensured that all products under processing are produced according to their related specs.• Managed the customer complaints and tried to solve the problems as fast as possible.• Prepared customer satisfaction reports regarding customer service complaints.• Provided suggestions for the development of the company's products.

• Design of medium voltage distributors, capacitor banks, main ring units, and package substations.• Prepare all technical drawings including the single line diagram and the schematics needed.• Prepare the bill of materials needed for each project and coordinate with the planning section to make sure that thematerials are available.• Provide technical support for the design team and the tendering team regarding technical and commercial offers & orders.

• Managed the production line of main ring units up to 22 KV for both types: Air RMU type (F&G) and SF6 RMU Type (Ormazable).• Managed the production line of distributors up to 22 KV for both types: metal-clad switchgear type (Ronex –Schneider) up to 17.5 KV and metal-clad switchgear type (Ormazable) up to 22 KV.• Controlled the production line of medium voltage capacitor banks up to 22 kV - 9 MVAR - 3 step.• Managed the production line of package substations up to 22 KV & up to 2 MVA with low voltage main circuit breaker up to 4000A.• Managed the production line of low voltage distribution panels up to 4000A type (X-energy) & non-standard• panels up to 2500A type (Tepco).• Confirmed that the final product complies with the IEC standards and the client technical Specifications.• Managed the production line considering the time, cost, and quality factors.• Following up on the production process.• Trouble shooting any problem during the production process.• Applying the quality liability & quality philosophy to all production staff.• Applying the statistical tools for analyzing product-related inspection and testing data.• Discussing on daily bases with quality control manager & senior quality control the product defects to prevent and• reduce the cause of defect occurrence.• Ensured the availability of all measuring equipment & inspection instruments needed for in-process inspection.• Ensured competence, accuracy, suitability, calibration, and the validity of all used measuring equipment and• inspection tools.• Monitoring and measuring the defect & scrap related cost concerning the in-process product to reduce bad quality• cost continuously.• Used the six sigma as statistical tools to improve the process quality & release defects.• Used the approach of lean manufacturing to improve the in-process inspection.• Ensured that all products under processing are produced according to their related specs.

• Installing and commissioning of medium voltage and low voltage equipment (MV switchgear, LV switchgear: MCCs, ATS, MDB, SMDB, and other switchgear products like capacitor banks).• Testing and commissioning for medium voltage and low voltage equipment.• Installing and commissioning of motor starting systems (VFD, Soft Starters) and power systems integrations.• Testing and commissioning for protection relays.• Applying the statistical tools for analyzing product-related inspection and testing data.• Ensure the availability of all measuring equipment & inspection instruments needed for in-process inspection.• Ensure competence, accuracy, suitability, calibration, the validity of all used measuring equipment and inspection tools.

• MV (RMU & KIOSK) & LV Switchgear Panel as QC Engineer And Able To Follow Quality Standards And Set• Quality Standards in All Aspects Of Production Line (Assembly, Testing, and Commissioning).• Testing and Commissioning of (LV Panels, MV Switchgear, MCCs, MCCB, ATS, Switch Fuse, MDB, and other switchgear products).• Applying the quality liability & Quality philosophy to all production staff.• Applying the statistical tools for analyzing product-related inspection and testing data.• Discussed on daily bases with quality control manager & senior the product defects to prevent & reduce the causeof defect occurrence.• Ensured the availability of all measuring equipment & inspection instruments needed for in-process inspection.• Ensured that all products under processing are produced according to their detailed specs.• Ensured competence, accuracy, suitability, calibration, the validity of all used measuring equipment and inspection tools.• Used the approach of lean manufacturing to improve the in-process inspection.• Ensured competence, accuracy, suitability, calibration, the validity of all used measuring equipment and inspection tools.