Re-worked facilities systems to be used in pharmaceutical FDA inspected manufacturing site, Clean Steam, CIP, SIP, RODI. Reworked cryogenic manufacturing machine. I solved cryogenic valve from freezing during production. LN2 level sensor problem I replaced the OEM sensor with a sensor I had worked with. I wrote engineering change order and justification for the change. I designed a system for storage of temperature probes when not in use. I solved space and cross contamination potential for powder conversion. I coordinated plant shut down for PM. Worked on vendor quotes and making sure POs’ were issued. Worked with all departments, Manufacturing, QA, Validation, QC so that the shutdown was seamless.

Manage all subcontractors Mechanical, Electrical, Plumbing to build state of the art R&D Facility.Design new building management system specific to company and building. Modify laq equipment to meet and exceed title 24 requirements.

Engineered and designed new cryogenic production equipment for product long-term stability, as well as improve existing systems while justifying ROI on improvements to robotic filling and packaging systems. Manage upgrades to Lyophilizer’s, Cozzoli fillers, gantry fillers A&B PLC’s and Fanuc robotics systems. Key Raised production output by 20% and quality by 30% by upgrading existing equipment.Programmed and managed construction 60,000 sqsf. manufacturing and R&D facility in Eatonton GA. I managed all contractors and P&L for the project. The facility was built and delivered on time and within budget.

Delivered facilities management and energy efficiency expertise for new technology integration and maintenance projects for R&D facility in cGLP environment. Installed, repaired and upgraded facilities systems, including co-gen upgrade, air change control, and chiller optimization. Managed capital projects and facilities budgets. Oversaw electrical outage recovery. Managed permit process. Key Projects: • Saved 15% in energy costs by replacing 500meg co-gen system with 1meg diesel generator. • Brought 280,000 sqft. facility exhaust system to USGB Gold Building Standards and AAALAC accreditation for the vivarium, biology labs, chemistry labs and high throughput screening labs. • Replaced five key UPS systems and tied to the new emergency power system.

Harrodsburg, KY: Project Engineer, Project Manager.Hired to get construction project on track. Managed Construction of Gorilla glass manufacturing site addition. Design modifications to clean room system to meet Gorilla glass specifications. Performed FAT, IQ of all mechanical systems. Taipei, Taiwan: Project Engineer, Project Manager.Took over mechanical construction for new Gorilla glass site addition. Redesigned clean room system to meet manufacturing standards for particulate containment. Managed Taiwan mechanical contractors to provide equipment used in clean room applications. Beijing, China: Project Engineer, Project Manager Managed mechanical systems contractors for air handlers and dust collection system at the green field site. Managed clean room envelope for proper installation, and sealing for manufacturing. Inspected all installation of enclosures to meet manufacturing specifications. Worked on the shop floor to make air handlers to specifications. Worked with the government of China regulators for electrical installation. Managed purchasing and budgets and provided QC for mechanical plumbing design shops. Key Projects: Designed air handler system for energy savings with coil bypass system for the site in China. Installed VFD's economizers for air temperature flow. Brought INTERNATIONAL project in ahead of schedule.

Project Construction Manager Managed construction projects for major hospital renovations. Supervised site subcontractors to ensure excellent customer relationships with medical staff and facilities engineers. Engineered mechanical systems workarounds. Integrated existing Johnson controls for cooling towers and chillers upgrades. Key Projects: • Managed sixth floor HVAC system renovation for San Diego VA Hospital 17,000 sqft. research department, including vivarium, BSL-3 labs, chemistry labs, tissue culture labs, behavioral suites and 70+ individual labs. All work required after hours operation to ensure labs stayed open during normal working hours. Also built out the second floor for $7.2M medical, dental, eye and neurology suites Managed $2.1M cooling tower renovation from existing 1000-ton three basins to 1300-ton each. • Oversaw $1.2M morgue expansion for the University of California at San Diego (UCSD) while ensuring construction process allowed existing services to be uninterrupted. Upgraded HVAC system to accommodate expansion from 12,000 sqft. to 21,000 sqft. with formaldehyde PPM detection. • Managed $100K program for new build lab for UCSD; applied green building principles for the bio-fuel research facility. Oversaw construction of 60,000 sqft. $30M natural science building with lab space. Renovated existing lab space for $40K-$100K biology department. Renovated all vivarium space to meet AAALAC international accreditation.

Designed and improved fuel filter system for diesel and gas generator test facility. Served as a programmer for mechanical integration of gas compressor test facility. Key Project: • Upgraded high-pressure natural gas from 250psi to 600psi and designed diesel fuel filtration system.

Solar TurbinesVerifying installation, functional performance, training and documentation new filtration system, Upgrade high pressure natural gas from 250psi to 600psi. Worked on new gas compressor test facility for all system utilities.

Duties are to oversee all aspects of Southern California Branch including management of building systems, maintain Branch budgeting, personnel functions, regulatory compliance, Process Development, Inventory, GMP, QSR compliance, Sales, and Installation. Recruited to stabilize the budget, correct overhead burden, implement GMP service department, track expenses through matrix management, and return US-Filter to the leader in customer service satisfaction in the water industry.

Construction Project Manager / Facilities Manager As Novartis Employee represented company for construction of 100 Million campuses in La Jolla CAWorked in programming sessions with each lab manager for setup and critical utilities. Personally toured lab managers in new construction of labs. Saved over $100,000 in change orders by implementing changes to MEP before walls were finished. Worked with all MEP contractors for proper installation of critical utilities. Acted as tour guide for all new Scientists requited to Novartis. Hired and trained facilities management team for campus. Set up web based work order system. Received 98% approval rating for campus facility team. Programmed and managed 80,000 sq. ft. heavy chemistry lab and 30,000 sq. ft. barrier isolation vivarium.Set up web based PM system for all facility equipment. Wrote all SOP’s for operation and PM of equipment.

Started a small company to help small startup Biotech and Pharmaceutical companies in San Diego. Signed over 35 different startup Biotech and Pharmaceutical companies to outsourced hourly Facility Management. I Hired and trained 5 Facilities Managers. I set up monthly bonus for billable hours. I set up alliances with property management companies, investors,city planning offices and select subcontractors of all trades. I managed P&L for the company.

Managed construction of 55,000 sqft. facilities for Manufacturing, Research, and Development GMP pharmaceutical company. Project Manager for the construction of 27,000 sqft. the facility including a 14,000 sqft. aseptic, FDA-approved manufacturing facility, WFI system, CIP system, SIP system, clean rooms, vivarium. Implemented Validation master plan, engineering systems to manufacture aseptic large parenterals, automation of process to fit the budget. Set up Engineering Change Order process, set up Benchmarking program for all production systems. Provided all support for Factory Acceptance tests and progression checks of all capital equipment at vendor sites. Project manager for utility upgrades with zero downtime for existing utility users. Assisted animal resources department in obtaining AAALAC International accreditation.

I was the automation engineer. Working on Liquid and powder filling and packaging equipment

At Hybertech I was an automation engineer setting up and repairing and designing new custom filling and packaging equipment. Programmed Allen Bradley PLC's. I worked the Maquiladora in Mexico during the day and then work the night shift filling operation. Great TGIF's on night shift!

I was the automation engineer responsible for all fill and packaging equipment maintenance and new custom automation for products.

Excellon CNC Programing for Multilayer Circuit Boards. Programmed routed aluminum backplane components for cruise missiles. Making Incon Merry XMASS gold plated key plates