Scott Mccabe Email & Phone Number

Livingston, Gb

Livingston, Gb

Livingston, West Lothian

Responsibilities/Duties (not an exhaustive list): Managing senior engineers and technicianEquipment and facility maintenance Facility and equipment CapEx requirements, project management of facility equipment installationsOverseeing IT contractors and ensuring IT systems are meeting Cyber Essentials Plus requirementsBudget control and purchasing approvalsProvide production line support to manufacturingResponsible for SPC, process assembly documentation, process acceptance criteria, process flows, out of control action plans and various key performance indicators.Yield monitoring / enhancement of all assembly processesInvestigating of RMA’s and provide feedback on any issues found during failure analysisResponsible for all product non-conformance reports, investigating problems to their root cause and implementing corrective actionsContinuous improvement and 5s activitiesProcess development engineer 2013 – 2018 (Optocap – 2013 – 2016)Experience as project lead on multi manufacturing programsDirect point of contact for the customer throughout prototype, transfer to volume production (NPI) and continuous development of various productsProgramming of complex die attach bonders, wire bonders and seam sealing equipmentDesigning suitable fixtures for volume manufacturing of various optical and electronic componentsYield reporting directly to customers

Glasgow, United Kingdom

Responsibilities/Duties: Assembly of modules including Laser range finders, Laser target designators and systems to required company standards.Assembly of small mechanisms with mechanical, optical and electronic content including soldering requirements.Responsible for the testing of products to defined methods and documentation. Responsible for the use of measuring and alignment equipment, assessment of repair needs and diagnostic activities.Support of ESS activity, Safe handling of complex equipment (including optics), identification of improvement opportunities and assisting colleagues to achieve defined targets.Responsible for ensuring the calibration of measuring and test equipment within the assembly area.Kaizen and continuous improvement activities through lean sigma.

East Kilbride

Responsibilities/Duties: To maintain and repair process equipment in assembly areas. Including Palomar die bonders and wire bonders, plasma chambers and Nexiv measuring system.To ensure spares are readily available for preventative maintenance and equipment breakdown.To ensure process equipment is calibrated and all associated measuring equipment is accurate.To lias with equipment vendors to support the up time of process equipment.Train in house with Engineers and operators on product builds.Issue and prepare work and maintenance instructions to QA standards.To answer Non conforming material issues and control yield improvements relating to the manufacturing of Semi-Conductor Laser diodes.Input SPC data into infinity and react to data trends.Process owner for Hermetic seam sealing and leak checking.

Edinburgh, United Kingdom

Responsibilities/Duties: To test O-Led (Organic light emitting diode) display product to customer specifications including accelerated life test and burn in.Responsible for Reltech environmental chamber testing, analysing data and reporting results to test engineering.Processing wafers through probe test, assisting in assembly of product when required.Responsible for equipment calibration and spare parts within the test department.Producing standard operating procedures to QA standards.Preparing and sending various demo components for customers. (PCB interfaces and modules)To assist in first level fault finding and software problems (Labview).

Livingston

Responsibilities/Duties: Part of team sent to Canada to transfer Fibre Bragg Gratings production line to Alcatel (Livingston).Assisted in set up and full process qualification within the required timescale.Responsible for issuing relevant work instructions and training new personnel for CO2 laser trimming process on the GFF (Gain Flattening Filter) product.Responsible for the product specification set up, this would include the set up of the optics to achieve correct bandwidth, centre wavelength and reflectivity of the 980 & 1480nm PSF (Pump Stabiliser Filter) product.Part of team sent to Thailand (Fabrinet) for the transfer and set up of the Excimer class 4 lasers for qualification.Set up training schedule and trained Thai colleagues on the 980 & 1480nm PSF (Pump Stabiliser Filter) product.Carried out and recorded planned maintenance in accordance with the maintenance schedules. (Including Dicing saws, ovens, ball and wedge bonders and Newport test rigs).Troubleshooting and equipment repairs.Assisted in carrying out calibration procedures and updating all records in accordance with ISO quality standards.Responsible for carrying out the following production tasks: - Rail Attach, Dicing, Fibre Splicing and Die-Diode Attach.Updated and tested dicing machine programs for product specification changes.

Livinston, West Lothian

Responsibilities/Duties: Carried out maintenance of fully automated equipment within the assembly area.Main responsibility was the repair and fault finding of Wafer Mounters, UV machines, Dicing saws, LOC (Lead on Chip) Mounters, Ball Bonders and Hydraulic Mould Injection Presses.Tasked to constantly increase machine uptime through O.E.E, TPM and Kaizen improvement activities.