• Manage shop of 11 technicians that provide ATC Communications, RADAR, and METNAV services, as well as power production, Information Technology and logistics services.• Coordinated calibration of test equipment needed to maintain and repair electronic equipment.• Maintain inventory of spare parts and sub-assemblies in accordance with prime contractor specifications.• Support Iraqi Air Force training mission and ATC functions. • Coordinate with weather forecasters and observers on any outage of equipment.• Provide weekly reports to Air Operations Director and Iraqi Air Force

• Maintained fixed station TACAN system (Moog MM7000), two Selex 2100 Glideslope/Localizer Precision Approach Instrument Landing systems with DME, Selex 1150A Conventional VHF Omni Directional Range (CVOR) and the Vaisala Automated Weather Observing systems (AWOS).• Coordinated calibration of test equipment needed to maintain and repair electronic equipment.• Build and repair communication cables and RF cables.• Maintain inventory of spare parts and sub-assemblies in accordance with prime contractor specifications.• Assist RADAR and Radio Communication technicians with outages and preventative maintenance inspections (PMI’s)

• Maintained two Thales 420 Glideslope/Localizer Precision Approach Instrument Landing systems with DME and the Vaisala Automated Weather Observing systems (AWOS).• Assisted Afghan Civil Air Authority (ACAA) technicians with Thales Doppler VOR• Maintain inventory of spare parts, equipment, and sub-assemblies as required per NATO procurement office requirements.• Maintained electronic system baseline documentation and performed trend analysis of major system data points to predict and mitigate system failure due to high frequency usage, component aging, environmental and other circumstantial spontaneous factors.• Functionally tested faulty integrated and stand-alone electronic and electrical systems, diagnosed cause of malfunctions and replaced defective component, part or assemblies. Maintained record of customer system calibrations, adjustments and repairs.• Reviewed, compared and updated baseline technical documentation during ATCALS recertification cycles observing for parameter deviations changes or system data irregularities to determine overall system health and maintenance support planning.• Developed Preventative Maintenance Schedule and Instructions based on manufacture standards in accordance with ICAO standards• Performed flight inspections of Instrument Landing Systems in accordance with ICAO standards• Ensured all workspaces were well organized, regularly inventoried and properly equipped with ready service spares for high fail and single point of failure assemblies for mission critical and safety of flight systems.

• Assist in the management of the Regional Maintenance Center Air Traffic Control Approach and Landing Systems (ATCALS) organizational. Coordinated mission travel and planning for regional maintenance center technicians throughout Southwest Asia. Performed cost analysis and budgeting for operational missions, technician training, Government field acceptance testing and phased replacement of aging equipment.Provided on-site support to Forward Operating Bases during system installations and integration. Maintained daily communication with manufacturers, vendors and contractors during installations and upgrades to eliminate work delays due to logistics or system engineering failures. Reviewed test documentation and final results.• Troubleshot electronic systems to component level using Test Equipment, circuit analysis and Built in Test Equipment (BITE). Performed soldering repairs and removal and installation of integrated circuit components and LRU’s. • Conducted FAA Flight checks for multiple facilities to maintain system certification of all CENTCOM forward Navigational Aids (Navaids) and landing systems including the Localizer, Glideslope, DME, Tacan and Doppler VOR. • Read and Interpret electronic schematics, blueprints, technical manuals and completed field alterations. Utilized remote maintenance, supervisory and portable maintenance data terminal and specialized software to troubleshoot, monitor, align, reconfigure and adjust electronic systems. • Maintained fixed station and deployable Tacan systems, two Selex 2100 Glideslope/Localizer Precision Approach Instrument Landing systems, Doppler VHF Omni Directional Range (DVOR) and the FMQ-22 and FMQ-19 Automated Weather Observing systems.• Performed Instrument Landing System Computer server maintenance, Updated Virus signatures preformed backups and troubleshoot and repaired connectivity issues and application concerns. Replaced Faulty internal server hardware and upgraded hard drives and System memory.

• Installation of equipment racks, communication and power cables, fiber optic cables, and electronic communication systems at new FAA ATC tower in Las Vegas.• Built connectors of various types of cables, including RJ45, 25 pair amphenol connectors, and punch downs for 66 blocks• Pull cable and neatly dress cables in racks, below raised flooring, and on overhead cable ladders. • Reconfigured existing RADAR display units into space saving configuration. • Worked with FAA engineers to establish proper layout of RF radio antennas and Navigational Aid Monitors• Performed installation of equipment and wiring from schematics and blueprint drawings. Provided engineers with redline drawings if there were changes

Maintained two Thales 420 Glideslope/Localizer Precision Approach Instrument Landing systems with DME and the Vaisala Automated Weather Observing systems (AWOS).• Assisted Afghan Civil Air Authority (ACAA) technicians with Thales Doppler VOR• Maintain inventory of spare parts, equipment, and sub-assemblies as required per NATO procurement office requirements.• Maintained electronic system baseline documentation and performed trend analysis of major system data points to predict and mitigate system failure due to high frequency usage, component aging, environmental and other circumstantial spontaneous factors.• Functionally tested faulty integrated and stand-alone electronic and electrical systems, diagnosed cause of malfunctions and replaced defective component, part or assemblies. Maintained record of customer system calibrations, adjustments and repairs.• Reviewed, compared and updated baseline technical documentation during ATCALS recertification cycles observing for parameter deviations changes or system data irregularities to determine overall system health and maintenance support planning.• Developed Preventative Maintenance Schedule and Instructions based on manufacture standards in accordance with ICAO standards• Performed flight inspections of Instrument Landing Systems in accordance with ICAO standards• Ensured all workspaces were well organized, regularly inventoried and properly equipped with ready service spares for high fail and single point of failure assemblies for mission critical and safety of flight systems.

• Company provides service of ATM and check cashing services at casinos and various establishments across the United States.• Prepare shipments to sites for installations or to replace defective items.• Maintain inventory of warehouse using Quickbooks Inventory Management Software by Fishbowl• Create RMA’s for repair of parts• Ordering of parts from various vendors.• Load software on ATMS and other equipment• Receive shipments from vendors and sites

• Set up displays and shelves for current sales plans sent from corporate office via schematics and drawings• Pull orders from back room to fill shelves and customer orders• Place overstock back into system for inventory purposes in the back room• Assist with unloading of delivery trucks and stocking shelves for sales• Customer service assisting customers with locating items and performing cashier functions

• Electronics Technician at the AFCENT Regional Maintenance Center Air Traffic Control Approach and Landing Systems (ATCALS) organizational. Coordinated mission travel and planning for regional maintenance center technicians throughout Southwest Asia. Performed cost analysis and budgeting for operational missions, technician training, Government field acceptance testing and phased replacement of aging equipment.• Worked with base logistics department and supply managers on all parts related concerns, problems and equipment requirements. Provided continuous input and updates to data system on ATCALS equipment movement for 100% accountability throughout the AFCENT Area of Responsibility. • Troubleshot electronic systems to component level using Test Equipment, circuit analysis and Built in Test Equipment (BITE). Performed soldering repairs and removal and installation of integrated circuit components and LRU’s. • Conducted FAA Flight checks for multiple facilities to maintain system certification of all AFCENT forward Navigational Aids (Navaids) and landing systems • Read and Interpret electronic schematics, blueprints, technical manuals and completed field alterations. Utilized remote maintenance, supervisory and portable maintenance data terminal and specialized software to troubleshoot, monitor, align, reconfigure and adjust electronic systems. • Maintained fixed station and deployable Tacan systems, two Selex 2100 Glideslope/Localizer Precision Approach Instrument Landing systems, Doppler VHF Omni Directional Range (DVOR) and the FMQ-22 and FMQ-19 Automated Weather Observing systems.• Performed mobile air navigation system installations, antenna grounding, corrosion control and painting and lubrication of moving parts assemblies and mechanisms

• Site Lead (10/2008 – 12/2009) for the ATCALS office supporting Operation Iraqi Freedom. Responsible for 13 employees who provide Air Traffic Control and Landing Systems (ATCALS) Radio, Radar, NAVAIDS and HVAC support. Work directly with communications squadron and Air Traffic Control.• As lead technician, maintain navigational systems (Localizer, Glideslope, VORTAC) • Responsible for ensuring all test equipment is turned in for calibration.• Perform periodic flight checks with FAA• Received training and performed certification of Enhanced Terminal Voice Switch(ETVS) BS3 radio suite• Familiarization training and certifications of URC-200 and CM-200 radios at GATR site, GPN22, GPN27, UPX27 RADAR systems (PAR and ASR) and VSAT. Performed troubleshooting and PMI’s as scheduled with Radio and RADAR technicians.• Use of military IMDS program to track PMI’s as they are completed

• Install an upgrade of Navigational Aiding Equipment (NAVAIDS) including Localizer and Glideslope at US Air Force bases worldwide. • Received training from manufacturer of equipment such as Selex and Fernau• Performed complete NAVAIDS install, consisting of two localizers, two glide slopes, and a VORTAC, including installation of power generators, grounding grid, and coordinated concrete pad construction as part of Operation Iraqi Freedom at Balad Air Base. • Installed ILS 2100, RCSU 2238 and DME 2020 at US Airbase in Qatar in support of Operation Enduring Freedom. • Part of team that installed 4 TACANs 2010 and 1 VORTAC 1150 on contract for Air Force Material Command. • Quality Assurance Inspector for Fiber Optic Install at Fort Irwin National Training Range at Barstow, Ca. • Part of a team repairing and restoring MSN-7 TRV (Tower Restoral Vehicle) in Sacramento, Ca, which included painting, electronics checks, and electrical checks. • Part of a two-person team performing a modification to US Air Force ILS shelters as part of the ILS Power and Grounding contract, that included installing new circuit breaker panel and re-wiring power into the shelters. • Equipment used in all tasks, vector voltmeter, signal generator, digital volt meter, frequency counter, oscilloscope, watt meters, Network Analyzer, and various others.• Knowledge of building RF, power, and comm cables, circuit board soldering.• Obtained a security clearance of Secret