Commissioning Operation Superintendent at the subproject (P3) of the Amur Gas Processing Plant (AGPP). PJSC "Gazprom". OOO Gazprom Pererabotka Blagoveshchensk. Responsible for the control of installation, commissioning and commissioning of technological subsystems including: intershop engineering communications; raw source gas metering units; ethane accounting units; technological pipelines; fuel gas metering unit and pipeline to Svobodnenskaya CHPP; installations for the production of air and nitrogen; technical and drinking water supply systems; hot water boilers; warehouses for storage of liquefied hydrocarbon gases (LPG), diesel fuel storage, flare system. Checking all systems and technological subsystems for compliance with P&ID and PFD, commissioning and operation. Drawing up detailed procedures with commissioning engineers.Definition of daily work and planning by day in accordance with priorities.Ensuring the implementation of all pre-commissioning, commissioning, commissioning and operation in accordance with applicable procedures and an agreed schedule.Ensuring that commissioning personnel comply with quality standards and safety procedures, including compliance with the requirements associated with work permits.Coordination of the work of the heads of sections for commissioning in various disciplines (electrical engineering, instrumentation, mechanics) in order to perform pre-commissioning and commissioning in accordance with the priority.Checking test packages for compliance with items of defective lists, reassembly lists, a list of stubs based on the design test packages management procedure. Participation in activities related to pre-launch safety review. Supplier mobilization planning, confirmation of working hours, on-site guidance.

Production shift supervisor of the project "Helium Container Logistics Service Center (HAB)". PJSC "Gazprom". OOO Gazprom Helium Service. Responsible from the operating side for monitoring the installation, commissioning, commissioning and direct operation of technological subsystems, including: helium liquefaction plants (2 lines with a capacity of 500 l / h of liquid helium (LHe) each, by Linde Kryotechnik AG; air separation plant for the production of liquid nitrogen (LIN) - 1150 Nm3/h and Liquid Oxygen (LOX) - 1000 Nm3/h from Linde Engineering, 2 x 100 m3 cryogenic storage tanks for liquid nitrogen, 50 m3 cryogenic storage tank for liquid oxygen, helium capacity of 120 m3; ISO container preparation department with 8 stations; repair and testing facility for ISO containers; natural gas liquefaction (LNG) unit 400 kg/h; LNG cryogenic storage tank; LNG vehicle refueling station. Checking all systems and technological subsystems for compliance with P&ID and PFD. Ensuring the implementation of all pre-commissioning, commissioning, commissioning and operation in accordance with applicable procedures and an agreed schedule. Supervision of the contour testing of instrumentation and electrical equipment, as well as functional tests with the output of signals to the distribution control system (DSC). Control over the conduct of the technological process with the help of automated workstations (WORKSTATION). Carrying out leak tests (total air leakage tests and maximum working pressure tests), including preparatory work. (MOP). Carrying out comprehensive checks and running-in of pumping and compressor equipment of firms: "Atlas Copco"; "Ingersoll Rand"; Serra; "Bauer"; KAESER, as well as a turbo-expander-compressor unit from Cryostar. Preparation of buffer storage tanks for helium by purging and vacuum pumping, as well as their filling with gaseous helium, belonging to a purity class of at least 5.0.

Master in oil and gas preparation at the Oil Rims project (Gazprom PJSC, Gazpromneft-Zapolyarye LLC). Responsible for installation supervision, pre-commissioning, commissioning, commissioning and operation of mobile oil treatment units, as well as a mobile separation and loading unit. Checking all systems and technological subsystems for compliance with P&ID and PFD. Control of the connection of control and automation cabinets, power cabinets, installation of APCS software, programming of logic controllers (PLC) SIEMENS, B&R, EMERSON, SHNEIDER ELECTRIC, ALLEN BREDLEY. distribution control system (DSC). Control over the conduct of the technological process with the help of automated workstations (WORKSTATION). Management of the process of collecting and preparing well products. Maintenance of technical documentation. Training of personnel to work on equipment (mobile complexes). Supervising the development and manufacture of equipment.

Responsible representative from the operating side for control of construction and installation works, precommissioning and commissioning, acceptance of pipelines and equipment with subsequent control of cavity cleaning at the gas and gas condensate complex treatment plant, which includes: Inlet loops and primary separation shop No. 1,2. Installations of low-temperature separation No. 1,2. Methanol recovery units No. 1,2. Condensate stabilization units No. 1,2. Installation of preparation of the heat carrier. Plant for purification of PBT from methanol. Booster compressor station for low-pressure gases. Storage of stable gas condensate. Warehouse of propane-butane technical. Commissioning, installations for the production of nitrogen and air. Commissioning, initial start-up and operation of the fuel gas treatment plant. Verification of all systems and subsystems of the process by P&ID and PFD. Issuance of comments to contractors and subcontractors with subsequent control over their elimination. Carrying out tests for density and strength, additional tests for tightness, as well as inertization of equipment. Control over compliance with the technological regime, the quality of raw materials and manufactured products in terms of indicators of instrumentation and analysis results. Control over accounting for the consumption of raw materials, products, reagents, catalysts, fuel and energy resources. Ensuring the synchronism of the work of all technological blocks and nodes. Compliance with the requirements of the rules, norms and instructions for labor protection, industrial safety, local regulatory documents, internal labor regulations.

Conducting the technological process and monitoring the operation of machines and equipment of the gas collection, treatment and transportation workshop, gas treatment unit at the gas turbine power plant of the Novoportovskoye field Start-up, shutdown and activation of gas treatment and compression units. Preparation of individual devices and installations as a whole for maintenance and repair. Quality control of construction and installation works at the construction site. Interaction with the personnel of construction and installation organizations on the construction of site facilities. Participation in the commissioning of equipment and in the testing of process pipelines and equipment. Filling out technological documentation.

Responsible representative from the operation side for control of construction and installation work, precommissioning and commissioning, acceptance of pipelines and equipment with subsequent control of cavity cleaning at the installation for the integrated treatment of natural and associated petroleum gas, including: inlet separator unit; condensate deethanization unit; gas drying unit; cryogenic separation unit equipped with a turboexpander-compressor unit manufactured by Atlas Copco Mafi-Trench Company, LLC; debutanizer block; coolant heating unit manufactured by HEATEC Inc. Commissioning, initial start-up and operation of a warehouse for liquefied hydrocarbon gases (LHG), designed to store a mixture of technical propane-butane (SPBT). Commissioning of a storage warehouse for stable gas condensate, a compressed air compressor and a nitrogen membrane station by Atlas Copco, a flare plant for a storage warehouse for UPPPNG products. Verification of all systems and subsystems of the process by P&ID and PFD. Issuance of comments to contractors and subcontractors with subsequent control over their elimination. Carrying out tests for density and strength, additional tests for tightness, as well as inertization of equipment.

Work in the commissioning group, acceptance of pipelines and equipment with subsequent tests for density and strength, additional tests for tightness, as well as equipment inertization, running-in of pumping and compressor equipment. Reception of methanol and related tech. liquids and energy resources. Initial start-up and operation of the switching valve building at a pressure of 13.9 MPa, start-up of cork traps, gas separation unit, condensate stabilization unit, compressor gas stabilization. Commissioning of methanol supply tanks with a pumping station, as well as a methanol regeneration unit. Verification of all systems and subsystems of the process by P&ID and PFD. Issuance of comments to contractors and subcontractors with subsequent control over their elimination.

Responsible representative from the side of operation for control of construction and installation works, precommissioning and commissioning, acceptance of pipelines and equipment with subsequent control of cavity cleaning. Verification of all systems and subsystems of the process by P&ID and PFD. Issuance of comments to contractors and subcontractors with subsequent control over their elimination. Operation of 3 modules of the compressor station, equipped with oil-filled screw units by HOWDEN. Control over compliance with the technological regime, the quality of raw materials and manufactured products in terms of indicators of instrumentation and analysis results. Control over accounting for the consumption of raw materials, products, reagents, catalysts, fuel and energy resources. Prevention and elimination of deviations of the process from the specified mode. Ensuring the synchronism of the work of all technological blocks and nodes. Compliance with the requirements of the rules, norms and instructions for labor protection, industrial safety, local regulatory documents, internal labor regulations.

Conducting the technological process and monitoring the operation of equipment at gas treatment and compression plants in accordance with work instructions. Management of the liquidation of arising deviations of the technological process and accidents. Allocation of personnel to workplaces and control over the performance of their duties. Filling out technological documentation. Achievements: Commissioning and initial start-up of the gas treatment unit. Changes in the project to improve gas purification from hydrogen sulfide by 20%.