AeroLeads people directory · profile

Seth Irwin Email & Phone Number

Electrical/Controls Engineer
Location: Austin, Texas Metropolitan Area, United States 10 work roles 1 school
1 work email found @ceccontrols.com LinkedIn matched
✓ Verified Jun 2026 4 data sources Profile completeness 71%

Contact Signals · 1 work email

Work email s****@ceccontrols.com
LinkedIn Profile matched
3 free lookups remaining · No credit card
Role
Electrical/Controls Engineer
Location
Austin, Texas Metropolitan Area, United States

Who is Seth Irwin? Overview

A concise factual answer block for searchers comparing this professional profile.

Quick answer

Seth Irwin is listed as Electrical/Controls Engineer based in Austin, Texas Metropolitan Area, United States. AeroLeads shows a work email signal at ceccontrols.com and a matched LinkedIn profile for Seth Irwin.

Seth Irwin previously worked as Instrumentation/Controls Engineer at Abengoa Water Usa and Project Engineer at Cec Controls. Seth Irwin holds Bachelor Of Science, Electrical Engineering from University Of Houston.

Company email context

Email format at ceccontrols.com

This section adds company-level context without repeating Seth Irwin's masked contact details.

{first_initial}{last}@ceccontrols.com
86% confidence

AeroLeads found 1 current-domain work email signal for Seth Irwin. Compare company email patterns before reaching out.

Profile bio

About Seth Irwin

Twenty years experience in electrical/controls engineering.

10 roles

Seth Irwin work experience

A career timeline built from the work history available for this profile.

Instrumentation/Controls Engineer

Abengoa Water Usa
  • Solana Generating Plant, Gila Bend, Arizonao Controls design for water treatment facilities improvements.
Oct 2015 - Dec 2015

Project Engineer

Warren, Michigan, US

  • City of Bourne WWTRC, Boerne, Texaso PLC panels and communication node panels design.o Warranty support for instrumentation and plant SCADA.
  • Apogee Coal Selenium Treatment Plant, Logan County, West Virginiao PLC panels design.o Plant SCADA system programming and integration of vendor SCADA systems into plant SCADA.o SCADA system commissioning.o Warranty.
  • Beverly Beach Pump Station/Reservoir, Flagler County, Floridao Instrument configuration.o Plant SCADA system programming and commissioning.o Remote RTUs and local data collection RTU programming.o Radio modem.
  • City of Laredo El Pico WWTP, Laredo, Texaso Instrument installation and configuration.o Plant SCADA commissioning.o Warranty support.o PLCs: GE RX3io HMI/SCADA: GE PPS 2.1/iFix 5.5
Oct 2011 - Jul 2015

Self-Employed Contractor

  • Contract electrical engineering consulting – electrical design and analysis.
  • Computer tech – support, troubleshooting, repairs, upgrades, complete systems, recycling.
  • Video surveillance system design, installation, commissioning, and support.
  • High school and college math tutoring.
Feb 2009 - Oct 2011

Senior Electrical/Controls Engineer

  • Programmed and commissioned iFix 3.5 & 4.5 HMI/SCADA applications for Membrane Bioreactor (MBR) wastewater treatment systems.
  • Designed electrical controls, determined electrical power requirements, advised on equipment layout, designed the electrical installation, and supported commissioning for wastewater treatment systems.
  • Designed and commissioned electrical and PLC controls for belt conveyor systems.
  • Designed electrical controls and wrote controls specifications for municipal wastewater pumping station improvements.
  • Supported design and engineering staff in ensuring proper electrical design and compliance with the NEC.
  • Equipment specification and procurement.
Mar 2007 - Feb 2009

On-Site Controls Engineering Contractor At Spansion, Llc

  • Produced design/construction drawings for new air/temperature and water treatment process control systems and improvements/additions to existing process control systems.
  • Designed and implemented PLC/HMI/SCADA programming as required by the above.PLC: Schneider Quantum/Momentum (Concept 2.6). HMI/SCADA: GE iFix 3.5.
  • Coordinated with process engineers, and operations/maintenance personnel in support, maintenance, and improvements of process control systems.
  • Other duties: Specification and procurement of materials for the above.
Sep 2006 - Mar 2007

Senior Electrical Engineer

Harutunian Engineering, Inc.
  • Designed medium and low voltage electrical power distribution, controls, and SCADA systems for water and wastewater treatment and pumping facilities.
  • Programmed and supported internal Microsoft Access database application that standardized and automated conduit sizing/fill calculations and voltage drop calculations and reported results for project deliverables.
  • Other duties: Submittal review, responding to RFIs, construction cost estimates.
Oct 2003 - Sep 2006

Staff Electrical Engineer

Magnum Engineering And Controls, Inc
  • Designed and commissioned electrical controls improvements for the aluminum smelting process, ancillary systems, conveyors, and environmental systems at Alcoa Rockdale smelting plant.
  • Conducted a plant-wide survey of all PLC equipment at the Alcoa Rockdale smelting facility and consolidated it in a Microsoft Access database.
  • Designed and commissioned electrical/PLC controls and HMI improvements at Alcoa San Antonio flat products plant to bring melting and annealing furnaces into compliance with Factory Mutual Insurance standards. PLCs.
  • Programmed Microsoft Access database application that performed electrical short circuit and arc flash incident energy calculations and hazard analyses and prescribed PPE levels for each point of exposure. This.
  • Other Duties: Engineering support for non-engineering personnel, construction cost estimates.
Sep 2000 - Feb 2003

Staff Electrical Engineer

Harutunian Engineering, Inc
  • City of Austin, Texas – Water Distribution and Control System Phase I (Microwave backbone and pressure monitoring sites renovation/integration) – Design of the pressure monitoring cabinets and installation and design.
  • City of Austin, Texas – Green Water Treatment Plant Raw Water Pump Station Improvements (Complete electrical/controls renovation) – Design of medium/low voltage power systems, raw water pump and ancillary equipment.
  • City of Austin, Texas – Davis Water Treatment Plant Improvements (Renovation of raw water pump station, chemical addition, flocculators, sedimentation basins, and associated plant medium/low voltage power distribution.
  • City of Georgetown, Texas – City of Georgetown Wastewater Treatment Plant – Electrical/controls design of entire new plant.
  • Programmed and supported Microsoft Access database application that standardized and automated load and bus/feeder sizing calculations for project team members and reported results for project deliverables.
  • Other duties: Lighting calculations, submittal review, RFI response, preliminary engineering reports, construction cost estimates.
Feb 1995 - Sep 2000

Field Service Engineer

Ross Hill Controls Corporation
  • Field tested and commissioned new Variable Frequency Drive installations.
  • Trained operations/maintenance personnel in VFD theory, operation, and maintenance.
  • Serviced existing VFD installations.
Sep 1993 - Oct 1994

Test Engineer

Ross Hill Controls Corporation
  • Factory tested production VFDs ensuring proper operation of all analog/digital control electronics, relay/PLC logic, fiber optics, power components, plumbing, and mechanical systems.
May 1993 - Sep 1993
1 education record

Seth Irwin education

  • University Of Houston
    University Of Houston
    Electrical Engineering
FAQ

Frequently asked questions about Seth Irwin

Quick answers generated from the profile data available on this page.

What is Seth Irwin's role at their current company?

Seth Irwin is listed as Electrical/Controls Engineer.

What is Seth Irwin's email address?

AeroLeads has found 1 work email signal at @ceccontrols.com for Seth Irwin.

Where is Seth Irwin based?

Seth Irwin is based in Austin, Texas Metropolitan Area, United States.

What companies has Seth Irwin worked for?

Seth Irwin has worked for Abengoa Water Usa, Cec Controls, Hyperion International Technologies, Llc, Harutunian Engineering, Inc., and Magnum Engineering And Controls, Inc.

How can I contact Seth Irwin?

You can use AeroLeads to view verified contact signals for Seth Irwin, including work email, phone, and LinkedIn data when available.

What schools did Seth Irwin attend?

Seth Irwin holds Bachelor Of Science, Electrical Engineering from University Of Houston.

Find 750M verified contacts

Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.