Sha Kan Email & Phone Number
@fredon.com.au
LinkedIn matched
Who is Sha Kan? Overview
A concise factual answer block for searchers comparing this professional profile.
Sha Kan is listed as Area Manager - HV LV I and C (Construction and Commissioning) at John Holland, a with 4597 employees, based in Greater Sydney Area, Australia. AeroLeads shows a work email signal at fredon.com.au and a matched LinkedIn profile for Sha Kan.
Sha Kan previously worked as Area Manager - HV LV I&C (Construction & Commissioning) at John Holland and Lead Project Engineer Electrical at Fredon. Sha Kan holds Be (Hons), Electrical Engineering from University Of Nsw.
Email format at John Holland
This section adds company-level context without repeating Sha Kan's masked contact details.
AeroLeads found 1 current-domain work email signal for Sha Kan. Compare company email patterns before reaching out.
About Sha Kan
Electrical Project Manager acquired 12+ years of Design, Re-Design, Procurement, Construction, Commissioning, Quality Assurance, Finance/Commercial, and Project Management Experiences & Expertise with WSP, TransGrid, CPB Contractors, Fredon & John Holland spanning Mining, Tunneling, Rail, Water, Power Generation, Transmission and Distribution Industries in Australia and Overseas.
Sha Kan's current company
Company context helps verify the profile and gives searchers a useful next step.
Sha Kan work experience
A career timeline built from the work history available for this profile.
Area Manager - Hv Lv I&C (Construction & Commissioning)
Upper South Creek Advanced Water Recycling Center (2023), Kemps Creek, Sydney Water (Project Value: 1.3B)
Lead Project Engineer Electrical
Sydney Metro Victoria Cross Integrated Railway Station Development (2019), North Sydney, Lendlease (Project Value: 476M)• Lead Project Engineer Oversaw Railway Station & Integrated Commercial Tower Re-Design, Procurement, Fit-out, QA and Commissioning Activities
Hv & Lv Project Engineer
Westconnex New M5 (2019), Beverly Hills to St Peters, NSW, CPB Dragados Samsung Joint Venture (Project Value: $4.3B)• Package Engineer managed HV / LV Testing & Commissioning Activities for two Motorway Operation CentresWestconnex M4 East (2017), Homebush to Haberfield, NSW, CPB Samsung John Holland Joint Venture (Project Value: $3.8B)• Responsible for HV Installation Package for nine 22kV / LV Distribution Substations• Oversaw Traffic Management Control System (TMCS) & Plant Management Control System (PMCS) Cable Termination (Re-)design Package for 5.5km Tunnel Carriageways, 6 on and off Ramps, 80+ Electrical Equipment Rooms and 4 Distribution Substations• Package Engineer for LV Electrical, TMCS, PMCS, ITS devices, Lighting, Tunnel Signage, Tunnel Emergency Services Installation work for 1km Section of Tunnel Carriageways and Entry / Exit Ramps including 9 Electrical Equipment Rooms
Project Engineer
Site Engineer
• International MV Testing / Commissioning Site Contracts on Waste Water Treatment Plants • Key Responsibilities- Worked on Pre-commissioning, Commission and Energisation workpack development, planning, compiling and documentations- Prepared 10kV / LV equipment Inspection and Test Plans (ITP), Inspection and Test Records (ITR), Energisation Work Method Statement and Risk Assessment and controls- Carried out safety inspections, permit isolations and issuing permit to work- Inspected the electrical installation and checked red line drawings- Managing and monitoring MV testing subcontractors- Performed scheduling / reporting on energisation progress- Spotted and Witnessed 10kV / LV equipment Testing, Commissioning and Energisation activities- Providing technical support to electrical supervisors and electricians- Provided coordination between project manager, senior project engineers, electrical supervisors and superintendents, domestic and International equipment vendors
Hv/Lv Design Engineer
Key Responsibilities:Conducted concept and detail design for various Transport, Utilities, Resources, Industry, Power Generation, Transmission & Distribution projects including preparations of 132 / 22kV Transmission Substation concept design General Arrangements, Clearances, and layouts per AS2067 and Australian Electric Utilities & Mining Design Standards, equipment ratings, concept design single line diagrams and protection schemes, Current Transformer sizing per AS60044.1, HV / LV Power cable sizing, Protection cable sizing & Cable sizing studies in CYMCAP per AS3008 AS3000 & IEC60287, HV / LV / Control & Instrumentation cable schedules, routing and terminations, site wide feeder reticulations, Power Transformer and earthing transformer specifications, Power System Modelling & Maximum Fault Level Studies in SKM Power Tools per IEC60909, Transmission Line Design and preparations of Design reports per TfNSW (Sydney Trains) Standards, Project Management, Risk Assessment and Controls, Client and Service Interface, Quality Assurance.Major Project Involvements:Power Generation, Transmission & Distribution / Resources & Utilities:• Shenhua Coal Mine 132/22kV Transmission Substation Concept design (2013)• Leichhardt Power Station Detail Design (2013)• West Angelas Power Station Detail Design (2013)• McArthur River Mine Power Station Expansion Detail Engineering (2012)• Malues Creek Coal Project Concept Design (2011)Transport (Rail / Roads / Highways) / Lighting:• Pacific Highway Upgrade (2013)• Gosford Passing Loops (2013)• Fairfield Transport Interchange Detail Design (2013)• Testing / Commissioning (Industry / Water / MV Distributions): - Victorian Desalination Project (2012)• ASP Level 3: - Malues Creek 11kV OH line extension for Transgrid 132kV / 22kV Substation auxiliary power supply (2012)
Hv Commissioning Engineer
Victorian Desalination Plant, Wonthaggi - $3.5Billion• Seconded to the role of HV Commissioning Engineer• Key Responsibilities:- Performed 22kV / 415V SIEMENS SIPROTEC protection relay programming, functional testing and verification on several 22kV / LV Substations- Implementation of IEC 61850 GOOSE Messaging inter trips & interlocks between switchboards and protection relays as per the designers requirements - Conducted conformance review for SIEMENS OC/EF, Bus Diff, Line Diff and Sensitive EF protection Current Transformers- Worked on Pre-commissioning, Commission and Energisation workpack development and planning- Prepared 22kV / LV equipment Inspection and Test Plans (ITP), Inspection and Test Records (ITR), Energisation Work Method Statement and Risk Assessment to identify potential risks and subsequent controls- Technical support, monitoring and issuing drawings and specifications to HV testing subcontractors- Created As Built Single Line Diagrams for Lighting and Small Power Distribution Boards
Undergraduate Electrical Engineer - Hv Substaion Primary Design
Colleagues at John Holland
Other employees you can reach at johnholland.com.au. View company contacts for 4597 employees →
Anna Zolotareva
Colleague at John HollandSeven Hills, New South Wales, Australia
View →
JO
Jane Ogilvie
Colleague at John HollandGreater Melbourne Area, Australia
View →
KW
Keri Watts
Colleague at John HollandGreater Perth Area, Australia
View →
DT
Debbie Turner
Colleague at John HollandGreater Brisbane Area, Australia
View →
PL
Prudence Lance
Colleague at John HollandPyrmont, New South Wales, Australia
View →
DM
David Mcilwraith
Colleague at John HollandGreater Brisbane Area, Australia
View →
TB
Tristan Balazic
Colleague at John HollandGlenroy, Victoria, Australia
View →
PL
Paul Lovett
Colleague at John HollandThe Rocks, New South Wales, Australia
View →
BJ
Ben Jennings
Colleague at John HollandNew South Wales, Australia
View →
BP
Benjamin Pistolich
Colleague at John HollandGreater Sydney Area, Australia
View →
Sha Kan education
Frequently asked questions about Sha Kan
Quick answers generated from the profile data available on this page.
What company does Sha Kan work for?
Sha Kan works for John Holland.
What is Sha Kan's role at John Holland?
Sha Kan is listed as Area Manager - HV LV I and C (Construction and Commissioning) at John Holland.
What is Sha Kan's email address?
AeroLeads has found 1 work email signal at @fredon.com.au for Sha Kan at John Holland.
Where is Sha Kan based?
Sha Kan is based in Greater Sydney Area, Australia while working with John Holland.
What companies has Sha Kan worked for?
Sha Kan has worked for John Holland, Fredon, Cpb Contractors, Transgrid, and Lepts.
Who are Sha Kan's colleagues at John Holland?
Sha Kan's colleagues at John Holland include Anna Zolotareva, Jane Ogilvie, Keri Watts, Debbie Turner, and Prudence Lance.
How can I contact Sha Kan?
You can use AeroLeads to view verified contact signals for Sha Kan at John Holland, including work email, phone, and LinkedIn data when available.
What schools did Sha Kan attend?
Sha Kan holds Be (Hons), Electrical Engineering from University Of Nsw.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trialCheck these profiles if this is not the Sha Kan you were looking for.
View similar profiles