Replace Obsolete Trailers with Multiplex Unit CALO NPS Harkers, Island, NC (2.4M) Currently Mr. Fields is the Site Superintendent, QC Manager and SSHO for the CALO 218765 project consists of ground up construction of one (1) Prototype Building #8 which is a modified dormitory style building with four (4) single occupant bedrooms. The prototypical square footage for the dormitory is (1) x 4-bedroom/2-bathroom dormitory = per dorm unit which requires 1-bathroom per 2-bedrooms and shared living space. The Elevated Structure is on timber piles with wood-framed construction. Demolish two existing obsolete trailers. Abandon/relocate existing utilities. Relocate existing sanitary lift station and associated force main. Remove effected trees and vegetation, and take care to protect remaining trees and vegetation where unaffected by new work. Provide 14 surface parking spaces for staff, guests and ADA spaces. Install a new recreational area with new pedestrian gravel travel paths. Elevated shared deck between housing units. Place a Gravel Grill area behind the new elevated shared deck. Add an additional 1,000-gallon propane tank and underground gas line serving new buildings with access path for re-fueling. Replacing existing water, sanitary, telephone, and electrical services. Managed a 5 million dollar project for NAVAFC at Blount Island Marine base. Project included heavy concrete repair for staging area for Military vehicles and a underground utility Duct bank. Prepares and reviews submittals, schedules, and contract documents. Provides Quality control and safety duties which include: Three phase quality control inspections. Developing Activity Hazard Analysis (AHA), performing three phase quality control inspections, Developing and reviewing safety plans Quality control Plans, Environmental protection plans, performing safety inspections, equipment safety inspections, and daily reports

Safety Manager Southeast Cherokee Construction. Safety manager for Heavy Mooring Project For Naval Station Mayport a 3.5 million dollar project. Construction for hurricane structures on the Bravo Wharf B for ship to tie off to in the event of a hurricane. Site work include drilling shaft and Placing concrete, critical lifts and managing environmental hazmat. Responsible for training for new site personnel, onsite inspections and daily reports. Drafts accident prevention plans, reviews activity hazard analysis and safety lectures.

Safety Manager for Sauer Incorporated. Safety manager for the turnover phase of the P-423 The littoral Combat Ship (LCS) Operational Training Facility. This project for was for Naval Station Mayport under NAVFAC. This was a 25-million-dollar Training facility. Site work was heavy underground utilities and required daily inspections and activity hazard analysis for trenching operations. Responsible for training for new sit personnel, onsite inspections and daily reports. Execution of accident prevention plan ensure all onsite hazards where mitigated. Had zero deficiencies during OSHA inspection.

Quality control for 10 million dollars in construction for USACE On JAX Naval Air StationProject includes HVAC systems, security systems, fire alarm systems, concrete, anti-terrorist protection, civil/site work and minor roof repairs. Reasonable for all submittals and RFI’s. Other duties include finding subcontractors, reviewing security badging for contractors, and pay applications. Performs three phase construction quality control inspections to include preparatory meetings, initial, and follow up meetings on all phases of construction, schedule and perform progress meetings, performed daily inspections, coordinate tests

Quality Control Manager for Korte. Project was the branch medical facility this was a 28 million dollar project. Project includes HVAC systems, security systems, fire alarm systems, concrete, structural steel, installation of medical equipment, installation of all electrical to include power distribution, masonry, windows, anti-terrorist protection, civil/site work and minor roof repairs. This project has much interior work to include paint, tile, mold mitigation, framing drywall, and door installation. In charge of design team this was a design build project. Reasonable for all submittals and RFI’s. Other duties include finding subcontractors, reviewing security badging for contractors, and pay applications. Performs three phase construction quality control inspections to include preparatory meetings, initial, and follow up meetings on all phases of construction, schedule and perform progress meetings, performed daily inspections, coordinate tests

Quality Control and Safety Supervisor for Central Southern Construction. Overseen over 12 million dollars of construction, for the expansion of the runways at NAS JAX Florida,earthwork, subgrade, reconstruction, full-depth, base, milling and overlay. Duties included: Develop Activity Hazard Analysis (AHA), Task Hazard Analysis (THA), perform preparatory meetings, perform necessary inspections, coordinate tests, performs safety tool box meetings, equipment safety inspections, hazardous material monthly report, creating and submitting daily reports.

Quality assurance and Safety manager for Northcon on the FLETC base for homeland security projects. Project was a 3.9 million dollar roof renovation for a major training facility. Prepares and reviews Submittals, RFI’s, Activity Risk, Analysis (AHA) before submission to government. Works well with Contracting Officers, CON REPS, Engineers, architects, and subcontractors to ensure all aspects of the project are built with quality and safety. Prepares daily reports to government for review. Completes daily QC, safety inspections. Sets up progress and QC meetings with contractors and government employees. Updates and creates schedules using Microsoft projects. Does three phase quality control inspections to include Preparatory, Initial, and Follow up.

Superintend, Quality control for Up Side Managment company managed over 4 million dollars of construction on JAX Naval Airbase. Has reviewed, created and submitted submittals for construction projects to include materials, safety/QC plans, schedules, and contract documents. Has created scopes of work (SOW) for hiring sub-contractors. Creates schedules and ensures all contractors completed projects within deadlines with no liquidated damage. Ensures all projects are within safety guidelines of EM 385-1-1 safety manual

Counter Insurgency Operations Afghanistan (COIN)Staff NCO for CENTCOM Tampa Florida. Assigned to J4E operations. Planner for overseas operations in construction and tactical missions for the area of operations with a primary focus for Afghanistan.Was assigned Afghanistan/Pakistan Hands Program. The AFPAK Hands is a Joint Chiefs of staff Program. The program is designed to build governance and stability for Afghanistan.

Did a year tour in Afghanistan. With the following accomplishments:Planned and executed over 200 tactical missions in support of USACE projects Afghanistan.Was the Non-commissioned Officer-in-Charge of Mazar-e-Sharif Resident Office. Responsible in ensuring health, welfare, safety, logistical support, administration, order, and discipline of staff comprising of 34 Department of Defense civilians and 4 contractors.Primary supervisor and mentor for staff of 39 Afghan engineers, linguist and administrators assigned to the Mazar-e-Sharif office duties included the following: - Coordinating back ground investigations and badging- Evaluating Job performance- Conducting and supervising training for QC and Safety.- QC on time cards to ensure proper payment- Hiring, transfers and job termination Directly managed United States Army Corps of Engineers (USACE) processes to assist USACE in accomplishing contract administration mission objectives and facilitated over 260 million dollars in construction projects for the Afghan National Army (ANA)Was the Fire marshal for USACE areas. Conducted fire inspections with base contractors (FLOUR) of areas of responsibility.submitted and created reports with USACE RMS Project management system.

Safety officer for peacetime construction in U.S. for 3 years, with a construction background involving writing safety plans for 15 years. Ensured safety plans were written with quality and according to NAVOSH and OSHA standards and conducted site inspections and inspected safety inspectors on NAVFAC projects worldwide.Identified and anticipated safety and health concerns and hazards by surveying environmental, operational, and occupational conditions; rendering opinions on new equipment and procedures; investigating violations; recommending preventive programs.Guided and promoted safe work performance by developing safety systems, policies, and procedures; developing safety campaigns, communications, and recognitions; training managers and employees.Maintained professional and technical knowledge of the latest Safety equipment and technology by attending educational workshops, seminars; reviewing professional publications Background performing duties associated with hazardous material control and management, performed planning and management of material handling equipment, and maintained responsibility for inventorying, receiving, transferring, and turning-in hazardous waste.Enforced safety policies by conducting inspections. Created an action plan and time line of corrective action based on priority of a hazard. Counseled managers and employees, disciplines employees. Monitors, appraises and reports job results.Provided safety information and prepares safety reports by collecting, analyzing, and summarizing data and trends. Maintains OSHA records, submited OSHA reports. Reviews Jobsite Safety Plans for new projects.

assigns daily work to teams and crews; prepares equipment, manpower, and material estimates from drawings and specifications; uses principles and techniques of scheduling; performs duties of shop planner or maintenance scheduler; performs construction and maintenance inspections; performs nondestructive metal tests. Drafts letters and instructions; prepares reports; administers accident prevention program; makes personnel assignments; provides technical advice on plans and specifications and on construction and maintenance techniques; implements maintenance and cost control program; prepares and uses network analysis; prepares and maintains project progress charts; organizes and controls the site development of materials and equipment.Japan: Managed 23 personnel, materials, equipment and funding in the completion four construction projects valued at $900,000. Projects included building force protection structures. That provided protection for security guard on Naval Bases. Projects included overhead concrete pours, parapet walls, and steel reinforcement.

• Reviews and analyzes project construction drawings and specifications and prepares a Construction Inspection Plan including a checklist of inspection points during critical phases of construction and installation. Verifies that all materials and/or equipment ordered meet applicable project specifications and certifies their conformance to these specifications upon receipt. Inspects all phases of construction and installation, including civil, architectural and structural, electrical and mechanical, for compliance with drawings, specifications and acceptable safe operating, installation, and construction practices. Schedules, coordinates, and observes tests on electrical and mechanical systems (includes operational tests on installed equipment) and arranges for quality control tests on such items as sub-base materials, aggregates and cementitious binders and on related mixes before, during and after installation. Prepares logs, records and reports on all inspections, and tests.Multi National Corps – Iraq-C7 Facilities as Quality Assurance/Control for Construction contracts. Did inspections in combat zones to include Al Saud, Fallujah, Spiecher, Tayji, Bayji, Q-west and Balad. Inspections and reports assisted with management of $242,663,242 of construction for the Iraq Theater of operations. Most of these projects were KBR projects.Quality Control - Japan - Wrote QC plans for several projects on Navy Base. Was QC inspector on several PEB style Facilities.

.Fabricates, assembles, erects, positions, and joins structural members and fabricated sections. Reads shop drawings and sketches; uses simple hoisting devices; cuts, forms, places, and ties reinforcing steel; works with erection crew as a connector or tagman; performs gas cutting, gas welding, and electric arc welding in all positions; identifies types and uses of electrodes, gas rods, and fluxes for welding, soldering, and brazing; identifies compressed gas cylinders; splices line and wire rope; computes safe working load of lines, wire rope, and block and tackle arrangements; erects common types of metal and swinging scaffolds; identifies types and shapes of structural and reinforcing steel; identifies types of pre-engineered buildings and structures. Draws simple shop drawings and sketches; prepares requisitions; welds ferrous/nonferrous metals in all positions, using gas metal arc and gas tungsten arc welding procedures; applies methods of controlling metal expansion during welding operations; applies field straightening techniques to damaged structural shapes; applies principles and methods of cutting, chamfering, and scarfing metal, using carbon arc chamfer-type rod and air arc processes; performs gas welding and electric arc welding; performs layout and fabrication of simple steel structures for teams and crews; rigs wire rope using poured sockets, clips, and related attachments; performs operator maintenance on power-actuated (low and high velocity) stud guns and on diesel or gasoline driven air compressors.