Shaun Deville Email & Phone Number

Houston, Texas, Us

Houston, Texas, Us

Aberdeen, Gb

Oversee and support JSEA and PTW requests in the form of reviews / walk downs and work scope verification. Ensure that the appropriate supervisors are involved in the safe work process and approvals are secured. Oversee permits are posted in designated areas and maintain status board updates. Ensure All PTW work packs are completed properly before being presented to the PTW Coordinator 24 – 48 hours prior to the daily SIMOPS/PTW coordination meeting. Ensure that all completed permits are properly closed and communicated to affected parties. Notify the HSE Advisor, OIM, Project Manager and Emergency Response Team for the facility of all High Risk Activities before performed. Verify, review and audit JSEA’s and Work Permits on a daily basis. Facilitate Task Risk Analysis as requested. Notify the Commissioning Manager, OIM and Project Management of any potential SIMOP’s issues. Monitor the SPOC(s) (Single Point of Contact) or isolators to ensure verification of work place controls are in place and being utilized correctly. Once per week, audit permits documentation in the office and in the field. This includes all pertinent permit to Work documentation (Signed JSEA, Current PTW forms, and all other applicable documentation with regards to that permitted activity). Identify and document findings on the Audit Sheet and implement corrective actions as needed. Perform a pre task review for proposed work in the form of site verification to ensure correct application of safe work practices and communication in regards to potential conflicts. Assist or Facilitate any and all incident/accident investigations under the direction of the HSE Manager. The Site Superintendent shall give support to the site HSE Representative as requested by company HSE Manager. Train all Wood Commissioning personnel as directed by the HSE Manager utilizing the Approved training content. Review One Line Diagrams / P & ID’s for correct implementation of Isolations of Hazardous Energy.

London, London, Gb

• Lead and insist on strict adherence to Lock Out / Tag Out, Procedures (LOTO), and policies• Oversight and review of all SIMOPS activities• Maintain Job Hazard Analysis (JHA) and perform detailed reviews• Collaborate with the craft every day in the field to encourage buy-in of our safety program and to support craft ownership of the safety program• Exercise Stop Work Responsibility to ensure adherence to company policies, regulations, work packs, and detailed work plans• Plan, prioritize, and problem-solve with operations in the field every day based on leading indicator trends and upcoming work• Encourage, support, inspire, and advise staff and craft employees to execute the SSSP• Assist with maintaining project files in compliance with OSHA/MSHA regulations and in compliance with our policies including accident/injury files• Assist with first aid and maintain relationships with emergency medical services and clinics• Assist with KieTrac entry, incident investigations, and implementation of effective solutions• Complete a daily documented hazard inspection and assist operations, craft, and subcontractors with implementation of corrective actions• Review work plans, work packs, and detailed work plans prior to the start of work• Assist and provide safety training on policies, procedures, OSHA/MSHA, NCCER, SIMS, orientation, and client specific requirements

Aberdeen, Gb

• Liaisoned as LOTO Coordinator between YCI Plant Operations, Construction and Commissioning groups• Maintained a functional Permit to Work and LOTO Management System including audit/regulatory responsibilities and document retention for Wood• Brady Link360 Point of Contact / Administrator• Trained all incoming personnel for WOOD Lock-out-Tag-out procedures• Procured all LOTO material for Construction discipline – locks, lock boxes, LOTO devices (electrical and mechanical), etc.• Responsible for issuing all LOTOs/Permits under Construction discipline – over 200 LOTOs and permits at a time• Coordinated Construction punch list, Master punch list, Hydro testing, Confined Space, and all other activities regarding SIMOPS and HSSE until Mechanical Completion and handover to Commissioning• Supervised authorized electrical/mechanical persons ensuring precise implementation of the Lockout/Tagout process

• Developed and maintained a functional Permit to Work Management System• Reviewed all scheduled work tasks for permit requirements• Reviewed and submitted for approval JSA and permitted work to the Commissioning Manager• Coordinated JSA and permitted work regarding SIMOPS and HSSE• Performed audits and provided statistical updates on PTW progress and compliance• Developed and managed a Lockout/Tagout process ensuring the safety of all persons who may encounter energized equipment• Supervised authorized electrical/mechanical persons ensuring precise implementation of the Lockout/Tagout process• Oversaw and managed all activities on and around Drill Package Unit while in KOS shipyard under Construction and Commissioning phases prior to sail out

Houston, Texas, Us

• Reviewed all aspects of the Appomattox project in order to thoroughly understand project needs• Reviewed and understood Appomattox OCT Project Work Plan (PWP)• Developed, maintained, and implemented (with Host Contractor) an Appomatox SIMOPs plan with associated procedures• Responsible to ensure work activities aboard Host are conducted in accordance with agreed SIMOPs management process and approved SIMOPs management procedures (including Permit to Work/LOTO)• Maintained active role in iOCT (integrated Offshore Coordination Team) and OCT (Shell Offshore Coordination Team)• Provided support to OCT and OCT Planner to ensure P6 (Primavera) activities are aligned to deliver without major SIMOPs conflicts• Performed regular review of project documents to ensure that they are fit-for-purpose• Coordinated with the Appomattox OCT Logistics Coordinators for scheduled and ad hoc marine vessel and flight needs• Communicated with Control Room and vessel bridges, Deck Coordinator, and OIM on all vessel activity that happened within 500-meter zone.• Single point of contact for all marine logistics to and from Host (procurement of fuel, backhauls, baskets, groceries, Commissioning spreads, temporary equip, etc.)• Coordinated Deck Space Management for Commissioning phases• Single point of contact for all helicopter logistics for all Subsea support vessels in field• Vetted all personnel for Project related to ILogistics and Customs clearance

• Cameron LNG ( Liquefied Natural Gas ) Expansion Project: Client Contractor P&ID's Review / Systems Walk Down / LOTO installation & removal / Tie-in Points Red lining & Procedure Development / Permit to Work Coordinating =I was responsible for developing, implementing & enforcing procedure Isolations for tie-in points for new construction, existing facilities upgrades & connecting green field to brown field on the project. Also perform sub-systems PSSR, "A" & "B" check sheets and Build It Clean (B.I.C.)• Issued, re-validated, suspended and tracked all construction permits• Coordinated Permit to Work issuing for support, guidance, and direction to project-based contractor personnel• Managed the day-to-day signing on and off project personnel in alignment with company procedures• Undertook field inspections to ensure compliance against the permit requirements including SIMOPS (simultaneous operations) coordination

Houston, Texas, Us

• Reported directly to Engineering & Design Lead• Attended and Participated in Project Meetings as needed with adherence to 12 Life Saving Rules (Including Hazid’s/Hazop’s)• Focal Point for RFI’s between Contracted Module Fabrication Sites and Project Engineering• Accountable for Engineering Work Package development from drawings and specifications for use in Work Face Planning packages• Provided Quality Control Checks on EWP’s for contents and revised as needed• Interfaced with Work Face Planning Group in various locations for Modular Work Pack, Construction Work Pack, and Installation Work Packs• Provided Constructability input from a HSSE standpoint as requested for craft baseo Structural Steelo Piping and Fabricationo Scaffolding• Provided input to EWP’s for QA/QC as requested from Quality Lead and OCT as requested from OCT Lead• Developed workflow process of Document Control/ Information management• Provided progress update to project services for Stones P6 Forecasting• Developed and provided oversight of EWP Register for Project Deliverables• Kept HSSE and Project Training requirements up to date as defined by Project Leadership• Provided weekly report for accomplishments and challenges to Team Leads• Provided requested actions from Stones Engineering Management to support fabrication & construction

Altrincham, England, Gb

• Coordinated and concurred all permitted work activities • Supervised entire Lock-Out Tag-Out program for facility• Redlined existing SEPCO documentation prior to mobilization at KOS facility to cater to Construction type environment • Trained all new personnel – Permit-to-Work/Lock-Out Tag-Out training• Maintained Personnel Qualification register

Merrillville, In, Us

• Responsible for procurement and sourcing projects of varying levels of complexity encompassing a 16-state footprint• Developed, analyzed, and prepared data for use in negotiations with suppliers• Performed economic analysis for business units• Approved and awarded an average of $41 million to vendors on spend of goods and services annually• Researched and developed cost drivers for products and services• Analyzed RFP responses for total value and total cost of ownership and recommends solutions• Identified opportunities for savings, efficiencies, and process improvement• Developed and measured supplier and team performance metrics

• Coordinated all permits for the Project with the SIMOPS Coordinator• Supervised the entire Lock-Out Tag-Out procedure for the Facility• Performed incident investigations for DSI • Served as liaison between the human resource department and the Facility• Coordinated the training of all Commissioning personnel• Presented weekly safety meetings and company updates• Recorded and reported stop card trending and accident occurrences

• Interfaced with CVX Procurement for the coordination and distribution of the Start-Up and Commissioning Spare Parts• Maintained the Master Spares Register database for all spare parts as supplied by the CVX Procurement Team• Coordinated the receiving of all Commissioning/Integration Materials at GMF and Offshore FPF • Generated and tracked all Tahiti Commissioning/Integration requisitions - Procured over $1 million of material in 9 months during the onshore commissioning phase

• Accounted for logistics of all 200 personnel onboard - helicopters and boats • Served as the single point of contact for room assignments & lifeboat assignments• Managed POB management database, Tactical Response assignments, Emergency Response Plan, and hurricane evacuations• Maintained all regulatory and BP required fields • Audited files on regular basis to assure regulatory compliance

• Handled the logistics coordination of all 450 Hook-Up and Commissioning personnel• Manifested helicopter and boat travel for 27 different vendors through U.S. Customs • Muster Station Supervisor / Emergency Responder• Served as the single point of contact for room assignments & lifeboat assignments• Managed POB management database, Tactical Response assignments, Emergency Response Plan, and hurricane evacuations• Maintained all regulatory and BP required fields