Simon Geraghty Email & Phone Number

Guyana

• Overseeing welding / NDE (Pipe wizard AUT, MUT, MPI) and FJC activities (FBE / CMPP / IMPP) of quad joints / J lay / SLWR’S and SCR’s / installation of PLETS / PLEMS and subsea manifolds.• Ensuring contractor adhered to all project specifications, approved procedures and ITP’s.• Review and approval of quality related reports.

Guyana

• Witnessed Prestart up WQT’S (5G GMAW and GMAW repairs) Associated NDE (Shaw’s AUT system, MUT, MPI) at CRC Evans Kintore Aberdeen.• Pre start up quality readiness review and qualification of coating personnel carried out onboard the Tamuata.• Overseeing Welding / NDE (Shaw’s AUT , MUT, MPI) and FJC (HBE-HT) activities of during shallow water Float and sink AWTI’s.• Ensuring contractor adhered to all project specifications, approved procedures and ITP’s (welding / NDE and FJC)• Review and approval of quality related reports and attending daily meetings.

Guyana

Representing ExxonMobil on the Payara development project offshore Guyana onboard Saipem FDS2 Witnessing welding / NDE and FJC activities of quad joints / J lay / LWSCR’s / installation of PLETS / PLEMS and subsea manifoldsEnsuring contractor adhered to all project approved proceduresReview and approval of quality related reports.

Darchem Engineering Stillington Uk Hinckley Point Project

Review LTQR’s / material certs and quality related work packs for structural steel and piping prior to client submission.

Dunkerque France

Representing Qatar gas on the Barzan and NFPS1 Projects 24" and 28” CRA (625 / 825) Covering 2 layer and 5LPP FBE, compression concrete weight coating, all related laboratory testing witnessing, WQT, Welding, and NDE during installation of Sacrificial Anodes. Load out and final documentation.

Eew Address: Im Grünewald 2, 57339 Erndtebrück, Germany

Representing Qatar gas on the Barzan PL23N replacement Project 24" CRA (625 / 825)Covering all aspects of JCO 24” CRA Clad pipe mill inspection, duties including but not limited to semi-automatic RES / SAW / GMAW / GTAW welding, AUT and digital radiography. (Incoloy 825 / Inconel 625 - L415 meteorologically bonded pipe)

Nexans Halden, Norway

Senior QC Inspector overseeing testing and Trans-spooling of two 8” production umbilical’s for BP Shah Deniz 2 field offshore development Azerbaijan .Ensuring contractor adhered to all company approved procedures, pre and post load-out acceptance tests of umbilical components including fibre optical testing (OTDR), Electrical testing (CR, IR, HV) pressure testing of super duplex lines, decay testing, final flushing and cleanliness, sheath repairs before transportation, Final review of related documents prior to handover to the client.

Kazakhstan

Overseeing Hook-Up of Raw Gas Injection (RGI) skid / Turnaround and De-Bottle necking activities. Installation of various size valves, piping spools and flanges, Tie-In welding / all related NDE (RTFI, MPI,DPI,MUT,HT,PMI,AUT) DHT,PWHT, walk downs, hydro & leak testing activities, critical joints, final paint and Touch-Up activities. Materials involved F22, Duplex, Super Duplex, 6Mo, Nickel Alloys 625/825 and LTCS. Ensuring Contractors are complying with associated normative documents. Review and approval of test packs, related reports and final documentation prior to handover. Personally contributed to achieving low Lost Time Incidents (LTI) statistics and meeting Key Performance Indicators (KPI’s).

Kazakhstan (Kuryk / Aktau)

Supervising and mentoring a team of local Inspectors to oversee the construction of three High Pressure sour service Topsides Modules and separate pipeline pig launcher skids. Review and ensure incoming material receipt and certification are compliance. Witness and overseeing WPQR’s, WQT’s and approval WQR’s. Covering structural and piping fabrication, production and repair welding, all related NDE (RTFI, MPI, DPI, MUT, HT, PMI, AUT) DHT, PWHT, dimensional checks, walk downs, hydro & leak testing activities and critical joints. Review and approval of related reports / test packs and final documentation prior to handover. Materials involved CRA CLAD, F22, Duplex, Super Duplex, 6Mo, Nickel Alloys 625/825 and LTCS. Daily and weekly report to project management. Personally contributed to achieving low LTI statistics and meeting KPI’s.

Kazakhstan

Working at a number of in country fabrication shops overseeing fabrication / welding / NDE / final paint and dispatch of pipe racks / pressure vessels and high-pressure piping. Final review and approval of construction dossiersCCT - Atyrau pipe racks (bolted connection) Sewon vertex - Aktau pressure vesselKCOI Aktau - High-pressure piping / pig launchers skids

Kazakhstan

IDC review of engineering and quality documentation submitted by contractors and suppliers for procurement, inspection and release of plant and materials.Technical review and approval of piping Mechanical Completion Test Packs on behalf of client prior to release for construction ensuring that all materials and testing is in accordance with specified project requirements, codes and standards.Interfacing with third party Independent Verification Bodies (IVB) by investigating and responding to requests for information and resolving findings.Reviewing and approving technical content of construction dossiers, manufacturing record books, piping test packs, mechanical completion dossiers, and material certification for multi discipline supplies.

Company site rep (SURF)Working on board Saipem Castoro 12 shallow water pipe lay barge. Duties included manage the field supervision of a 4-man inspection team. Reviewing procedures / ITP’’s and Quality Plans and all documentation relating to the integrity of the project from beach-pull’s, offshore pipe lay to AWTI’S. Monitoring offshore production and repair welding, reviewing radiograph’s and field joint coating operations ,witnessing pre-commissioning operations during the installation of 6”- 28” Sour & Non-Sour pipelines (including CRA clad Carbon steel - Inconel 825 / 625) Witnessing pre-season qualification of PQR’s, WQT’s & coating qualifications, NDT / mechanical tests and conducting contractors site audits to Company requirements. Final review of index data books on completion of installations.

India

Multi disciplined client Q.C inspectorWitnessing WQT'S, mechanical testing and PPT on Canusa HSS (prior to start up).Monitoring production / repair welding, AUT and FJC operations, S and J plet instalation on the Dhirubhai 1 & 3 gas field development project, 4”- 24”pipelines off the east coast of India, Review and acceptance of contractor’s relevant procedures and reports on behalf of the client.

Kazakhstan

Working on-shore (OPF and onshore trunk lines) monitoring production tie-in and repair welding, reviewing radiograph’s, field joint coating operations, pigging, hydro testing. Transferred offshore working on board Saipem Castoro 12 shallow water pipelay barge monitoring offshore production and repair welding, reviewing radiograph’s and field joint coating operations on the pipeline installation phase of the “KASHAGAN” development Experimental project (18” and 28”trunklines line’s) in the North Caspian Sea.Review and acceptance of contractor’s relevant procedures and reports on behalf of the client.

North Sea

Monitoring offshore production and repair welding, reviewing radiograph’s and field joint coating operations on the pipeline and umbilical installation phase of the “MINKE FIELD” development project 8” line in the North Sea. Review and acceptance of contractor’s relevant procedures and reports on behalf of the client.

Kazakhstan

Monitoring onshore production and repair welding , reviewing radiograph’s and field joint coating operations on the pipeline installation phase of the “KASHAGAN” development Experimental project” (18” and 28”trunklines) Review and acceptance of contractor’s relevant procedures and reports on behalf of the client.

North Sea

Monitoring offshore production and repair welding, A.U.T (rotascan) and field joint coating operations on the pipeline installation phase of the “BRITANIA SATELLITES PHASE 1” project 3”, 6”and 12” lines in the North Sea. Review and acceptance of contractor’s relevant procedures and reports on behalf of the client.

North Sea

Monitoring production / repair welding, reviewing radiograph’s and field joint coating operations on the pipeline installation phase of the “FORVIE NORTH” project 17”x 15” pipe in pipe and 2 x 8” duplex flow lines in the North Sea. Review and acceptance of contractor’s relevant procedures and reports on behalf of the client

Pipemills And Offshore North Sea Dutch Sector

Mannesmann Pipemill/Stolt Seaway FalconMonitoring all aspects of pipe mill manufacture at Mannesmann in Ham, Germany on a 14 km pipeline installation project through to welding procedure qualification and offshore pipelay installation (Dutch sector North Sea) Review and acceptance of contractor’s relevant procedures and reports on behalf of the client.Allseas LorelayF16 to K2 gas pipeline in the North Sea (Dutch sector) Monitoring production welding and repair welding, AUT and field joint coating operations.Review and acceptance of contractor’s relevant procedures and reports on behalf of the client.Subsea 7 Spool Base – LeithD12A to D15-FA-19 project (10” 13% cr). Witnessing WQT's and mechanical testing, monitoring production and repair welding, reviewing radiograph’s and field joint coating operations. Review and acceptance of contractor’s relevant procedures and reports on behalf of the client.Stolt Seaway FalconQ5A to Q8B pipeline project in the North Sea (Dutch sector). Monitoring production welding and repair welding, reviewing radiograph’s and field joint coating operations. Review and acceptance of contractor’s relevant procedures and reports on behalf of the clientCorinth Pipemill – GreeceF16 to K2 pipeline project monitoring all aspects of pipe mill production on the HFI welded 24” pipe (3-layer PP coating) Review and acceptance of contractor’s relevant procedures and reports on behalf of the client

Various - Uk

NDE and welding inspection carried out on a variety of oil and gas fabrications, over land pipelines, AGI’s ,Hot taps, Petro Chemical sites and fabrication yards through out the UK

Various - Uk

Kvaerner Oil & Gas – Triton FPSO ConversionCoded welder in TIG & MMA processes during the fabrication and Installation of Carbon & Stainless pipe work.CAXIOS Ltd – Enron Power StationWelding with TIG & MMA processes on small and large bore Carbon/Stainless Steel valves & associated pipe work.Caterpillar UK LtdInitially employed as a fabricator / welder working on small to large fabrications for the construction and mining industry. Graduating to engineering department as CAD / CAM programming for steel nesting / production control to engineering drawings. These duties were combined with quality control functions within the organisation

Uk

Fully coded welder trained in all aspects of steel fabrication and welding, (piping, structural, pressure vessels) on a wide variety of carbon and exotic steels.