Please complete the CAPTCHA to continue
@bluewaterenergysolutions.com
✓
2 phones found area 361
✓
LinkedIn matched
A concise factual answer block for searchers comparing this professional profile.
Skip Evans is listed as DCS Start Up Engineer based in Port Lavaca, Texas, United States. AeroLeads shows a work email signal at bluewaterenergysolutions.com, phone signal with area code 361, and a matched LinkedIn profile for Skip Evans.
Skip Evans previously worked as Lead DCS Commissioning & Startup Engineer at Rev1 Power Services and Lead DCS Commissioning & Startup Engineer at Bluewater Consulting Services.
This section adds company-level context without repeating Skip Evans's masked contact details.
AeroLeads found 1 current-domain work email signal for Skip Evans. Compare company email patterns before reaching out.
I have 37 years of experience in instrumentation and controls consisting of 20 years as DCS Commissioning and Startup Emngineer, 10 years as an instrument technician, and 7 years instrument installation. System experience includes Bailey Net90, INFI90, Operator IT B, and Emerson Ovation. Facility includes combined cycle, fluidized bed, coal fire, coal gasification, refineries, and chemical plants. DCS commissioning and startup responsibilities include commissioning instrument and electrical loops; writing procedures for and performing equipment functional checks; onsite re-engineering control logic, graphics, and dbase; implementing control logic, graphics, and dbase per control narrative or SAMA logic; tuning process loops; configuring DCS to OPE datalink communications; supervising multiple DCS engineers and I&C technicians; supporting operations during startup.
Listed skills include Plc, Power Generation, Boilers, Epc, and 15 others.
A career timeline built from the work history available for this profile.
Project was a retrofit and plant enhancement on two coal fired units with a total output of 75MW. The DCS was a ABB Symphony Pus with SA 800 hardware. Responsible for the commissioning instrument and electrical loops, performed equipment functional checks. Re-engineered control logic, graphics, and dbase changes as needed.
Acworth , Georgia , Us
This facility is a 1X1 combined cycle with a capacity of 310 MW. The unit consisted of a GE 7FA Gas Turbine, Nooter Eriksen HRSG, GE Steam Turbine, and Emerson Ovation ver. 3.5 DCS. Attended Factory Acceptance Test as client representative. Commissioned instrument and electrical loops, performed equipment functional checks. Maintained daily tracking program for loop commissioning and equipment functional testing. Re-engineered control logic, graphics, and dbase changes as needed. Supported operations during startup. Setup datalink communications with OPE technical advisors.
Two NID Alstom Scrubbers, Emerson Ovation 3.3.1 DCS. Attended FAT, commissioned instrument and electrical loops, performed equipment function checks. Maintained daily tracking program for loop commissioning and equipment functional testing. Re-engineered control logic, graphics, and dbase as needed. Setup datalink communications with OPE technical advisors.
Simple cycle peaking unit consisting of 5 LMS 100 Gas Turbines with an output of 500MW. BOP control system was an Emerson Ovation ver. 3.3.1 DCS. Commissioned instrument and electrical loops, performed equipment functional checks. Maintained daily tracking program for loop commissioning and equipment functional testing. Re-engineered control logic, graphics, and dbase changes as needed. Supported operations during startup. Setup datalink communications with various OPE technical advisors.
Overland Park, Ks, Us
Black and Veatch designed Wet Scrubber on units 4/5. This unit was controlled by an ABB Automation 800XA DCS. Commissioned instrument and electrical loops, performed equipment functional checks. Supported operations during startup.
Overland Park, Ks, Us
This project was a fuel oil to natural gas retrofit, steam turbine rebuild, and installation of a Emerson Ovation ver. 3.0.4 DCS. Supported client with control logic, graphics, and dbase review. Oversaw control loop commissioning and equipment functional checks. Inspected the installation of field instrumentation, DCS I/O cabinets, I/O cabinet wiring, and DCS control room equipment.
Overland Park, Ks, Us
Coal fired consisting of two 660MW Toshiba Steam Turbines, FGD, and Toshiba TOSMAP DCS. Worked on the FGD commissioning and startup phase. Worked on FGD commissioning instrument and electrical control loops, performed equipment functional test. Re-engineered control logic, graphics, and dbase as needed. Supported operations during startup.
Overland Park, Ks, Us
Gas fired station is three 3x1 Combined Cycle Units with a total output of 3750 MW. These units consist of Mitsubishi 501G Gas Turbines, Toshiba Steam Turbines, Nooter Erikson HRSG's, and an Emerson Ovation ver. 3.0.4 DCS. Commissioned instrument and electrical loops, performed equipment functional checks. Re-engineered control logic, graphics, and dbase changes as needed. Supported operations during startup.
Overland Park, Ks, Us
Coal fire power station with an output of 850MW consisting of a Toshiba Steam Turbine, Alstom Boiler, Alstom FGD, and Emerson Ovation ver. 3.0.4 DCS. Worked with Black & Veatch and Ovation engineers at Factory Acceptance Test reviewing and building control logic, graphics, and dbase. Presented the project to the client over a 4 week period and made further changes on their request. Continued on to site and consulted during the installation of I/O cabinets, control room equipment, power and grounding. Commissioned instrument and electrical control loops, performed equipment function test. Re-engineered control logic, graphics, and dbase. Maintained daily tracking program for loop commissioning and equipment functional testing. Supervised activities for 4 DCS Engineers. Supported operations during startup.
Overland Park, Ks, Us
Coal fired power station with a total output of 582MW. This unit consist of a Babcox and Wilcox Supercritical Boiler, Toshiba Steam Turbine, Foxboro IA 843 DCS, and Profibus. Commissioned instrument and electrical loops, performed equipment functional checks. Re-engineered control logic, graphics, and dbase. Supervised commissioning activities for 8 I&C technicians.
This power station was a 1X1 Combined Cycle with a total output of 425 MW. The unit consisted of a M701G Gas Turbine, Deltak HRSG, Mitsubishi Steam Turbine, and an Emerson Ovation ver. 2.4.1 DCS with Profibus and Foundation Fieldbus. Oversaw the installation of DCS I/O cabinets, I/0 cabinet wiring, DCS control room equipment, DCS power and grounding. Commissioned instrument and electrical loops, performed equipment functional test. Maintained daily tracking program for loop commissioning and equipment functional testing. Supported operations during startup and performance testing.
Crude Oil Refinery with a total output of 128,000 per day, FCCU capacity of 29,500 barrels per day, alkylation capacity of 10,000 barrels per day, and reforming capacity of 18,000 barrels per day. Responsible for routine instrumentation maintenance and troubleshooting.
Coal fired power unit with an output of 62MW. Unit consisted of a Kvaener CFB boiler, Mitsubishi Steam Turbine, and ABB Bailey INFI 90 DCS with OIS 43 consoles. Commissioned instrument and electrical loops, performed equipment functional test. Supported operations during startup.
Ethylene production facility. Duties included routine instrument maintenance work during shutdown.
Seabrook, Tx, Us
Crude oil refinery with a total output of 37,000barrels per day of gasoline and 20,000 barrels per day of distillates. Duties included routine instrument maintenance work during shutdown.
Petroleum refinery with an output of 500,000 barrels per day. Duties included routine instrumentation maintenance during shutdown and functional check of emergency shutdown system. Transferred to GE Conmec and supervised the commissioning of a 28 MW Expander Turbine.
This project was to generate a punch list on GE Frame5 Gas Turbines facilities and submit an assessment report to Bechtel. The report consisted of photographing the unit and a written evaluation of what was needed to put the turbines back online. I was responsible for the control panel (Speedtronics) and instrumentation. This assignment also required interfacing with the local engineers which meant learning customs and protocols depending on what part of Iraq you were in.
This power station is two 2x1 combined cycle blocks with a total output of 1036 MW. Each unit consisted of GE Frame 7FS Gas Turbines, Doosan HRSG, GE Steam Turbine, and ABB Bailey INFI 90 DCS with OIS 43 consoles. Commissioned instrument and electrical control loops, performed equipment functional test. Re-engineered control logic, graphics, and dbase as needed. Maintained daily tracking program for loop commissioning and equipment functional testing. Supported operations during startup.
This facility is a 2x1 Combined Cycle with a total output of 600 MW. This unit consisted of GE Frame 7FA Gas Turbines, Cerrey HRSG, Alstom Steam Turbine, and Ovation DCS. Commissioned instrument and electrical control loops, performed equipment functional test. Re-engineered control logic, graphics, and dbase as needed. Supported operations during startup.
Worked with Duke Flour Daniel Engineering supplied control narratives and SAMA logic to build control logic, graphics, and dbase on a Bailey INFI 90 DCS. Went through FAT with the client and made further changes per their request. This system was for a two 2 x 1 Combined Cycle Units.
Energia Campeche is 252 MW 1 x 1 Combined Cycle power plant consisting of a Mitsubishi Single Shaft 501F Gas Turbine, Cerrey HRSG, and Emerson Ovation DCS. Responsible for commissioning instrument and electrical control loops, performed equipment functional checks. Re-engineered control logic, graphics, and dbase as needed.
Atlanta, Georgia, Us
Tenaska 3 is a 845 MW combined cycle power plant consisting of 3 GE 7FA gas turbines, Deltak HRSG, and Bailey INFI 90 DCS with OIS 43 consoles. Responsible for commissioning instrument and electrical control loops, performed equipment functional checks. Re-engineered control logic, graphics, and dbase as needed. Setup datalink communications with various OPE technical advisors. Supported operations during startup and performance testing .
Atlanta, Georgia, Us
Griffith Energy is a 2x1 Combined Cycle unit with a total output of 570 MW. Facility consisted of GE 7FA Gas Turbines, NEM HRSG, and ABB Bailey INFI 90 DCS with OIS 43 consoles. Commissioned instrument and electrical loops, performed equipment functional checks. Re-engineered control logic, graphics, and dbase as needed. Maintained daily tracking program for loop commissioning and equipment functional testing. Supported operations during startup.
Atlanta, Georgia, Us
Doyle 5 is a 400 MW simple cycle unit consisting of five GE Frame 7EA. Worked with GE technical advisor to commission turbine associated instrumentation and supported GE during startup.
Service engineer covering the southeast US. Worked on Net 90, INFI 90, and a variety of consoles including OIS 20, OIS 40's, and Management Command System (MCS). Service calls responsibilities included troubleshooting I/O modules, controller module's, trouble shooting systems software issue's. Updating software and firmware, installed rack I/O modules, consoles, and power supplies. Installed Y2K software per costumer request.
Polk Power Station is a 260 MW Intergraded Coal Gasification Combine Cycle Unit consisting of a GE Frame 7FA Gas Turbine, GE Steam Turbine, Vogt HRSG, and Bailey INFI90 DCS with OIS42 consoles. After initial startup of this station in 1996 I returned to support capital projects with engineering changes to the DCS.I also enhance the DCS as requested by TECO engineering and operations.
Commissioned and startup of four Solar 60S/C-402 Gas Turbines with compressor heads on a 18.92 mmscfd natural gas station. Supervised 10 local I&C technicians with calibration, loop check to a Bailey INFI 90, and operational startup support. Wrote calibration and loop check procedures, designed forms and tracked calibrations and loop check. Trained local I&C technicians on Fischer valves, Rosemount smart transmitters, SOR switches, and various other "western" instrumentation.
This refinery has a 94,000 barrel a day refining capacity. I was responsible for routine instrumentation maintenance including calibration, device and control loop trouble shooting, and operational support.
Atlanta, Georgia, Us
This prototype unit was a 500,000 tons per year coal drying process. The control system was a Bailey INFI 90 with Lan 90 PCV5A consoles. I was responsible for commissioning instrument and electrical control loops, performed equipment functional checks. Re-engineered control logic, graphics, and dbase as needed. Supported operations during startup.
Polk Power Station is a 260 MW Intergraded Coal Gasification Combine Cycle unit consisting of a GE Frame 7FA gas turbine, GE steam turbine, Vogt HRSG, and Bailey INFI 90 with OIS42 consoles. Commissioned instrument and electrical control loops, performed equipment functional test. Re-engineered control logic, graphics, and dbase as needed. Supported operations during startup.
Atlanta, Georgia, Us
Muara Karang Power Station was a simple cycle plant capable of 300 MW via three GE MS9001E Gas Turbines. In 1995 Sumitomo Corp. added a GE STAG309E Combined Cycle Unit to boost the station output by185 MW. The BOP control system was a Bailey INFI 90 DCS with OIS 41 consoles. Commissioned instrument and electrical control loops, performed equipment functional test. Re-engineered control logic, graphics, and dbase as needed. Maintained daily tracking program for loop commissioning and equipment functional testing. Supported operations during startup.
Atlanta, Georgia, Us
This project was a GEESI Wet Limestone Scrubber. Supervised 10 I&C technicians with instrument calibration, loop check to a Fisher Provox, and operational startup support. Maintained calibration and loop check, and functional check documentation.
Atlanta, Georgia, Us
Richard M Flynn Station is a 2x1 Combined Cycle plant capable of 500 MW. This facility consisted of Siemens V84.2 Gas Turbines, Mitsubishi Steam Turbine, and Nooter Erickson HRSG. The BOP control system was a Bailey INFI 90 with MCS consoles. Commissioned instrument and electrical control loops, performed equipment functional test. Re-engineered control logic, graphics, and dbase as needed. Maintained daily tracking program for loop commissioning and equipment functional testing.
Quick answers generated from the profile data available on this page.
Skip Evans is listed as DCS Start Up Engineer.
AeroLeads has found 1 work email signal at @bluewaterenergysolutions.com for Skip Evans.
AeroLeads has found 2 phone signal(s) with area code 361 for Skip Evans.
Skip Evans is based in Port Lavaca, Texas, United States.
Skip Evans has worked for Rev1 Power Services, Bluewater Consulting Services, Overland Contracting Inc., Black & Veatch Core, and Rev.1 Power Services.
You can use AeroLeads to view verified contact signals for Skip Evans, including work email, phone, and LinkedIn data when available.
Skip Evans is listed with skills including Plc, Power Generation, Boilers, Epc, Engineering, Construction, P&Id, and Steam Turbines.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial Search contacts