Steven Kilpatrick Email & Phone Number

• Lead Completions Engineer managing engineering projects certification/ completions team managing ongoing and new project set - ups in the systems completions database Hub2. Reviewing work scopes, oversee Certification Handover Packs (HCP’s) generated from related work packs / P&ID’s / SLD’s, Line List’s etc. Populate Hub2 SCDB with all reference data / engineering data for tracking project completions from project start to close out. Completions Focal Point for various global clients dealing with Hub2 SCDB Operational support as and when required. Training clients project focal points to administer Hub2 CMS. Lead a team of certification engineers overseeing certification/ completions provided to clients globally.

London Area, United Kingdom

• Supervise ATEX Inspection team inspecting all E&I equipment in ATEX zones in various water and power station sites, assuring compliance with relevant standards and that all equipment is fit for purpose. Carry out any remedial works found on site and complete reports with recommendations for non - compliant equipment. Lead ATEX teams ensuring documentation and work scopes completed to standard and company / client expectations

• Upgrading DSEAR failures on 7 generators within the National Grid gas site at St Fergus. My responsibilities are to ensure all new equipment installed meets the ATEX DSEAR compliance standards then once installed test along with client ensuring new equipment not only meets the required standards but operationally operates to written specifications. Advise client on other potential ATEX DSEAR failures along with written reports and completions packs for client approval. Prepare Construction and Commissioning workpacks for standalone projects including the completions certification required for all installation and testing scopes

London Area, United Kingdom

• Part of ATEX Inspection team inspecting all E&I equipment in ATEX zones in various water and power station sites assuring compliance with relevant standards and that all equipment is fit for purpose. Carry out any remedial works found on site and complete reports with recommendations for non - compliant equipment. Moved on to lead ATEX teams ensuring documentation and work scopes completed to standard and company / client expectations

London Area, United Kingdom

E & I plant maintenance on high temperature boiler systems and FGT’s. Covering breakdowns on all Instrumentation systems on waste recycle plant, Effluent treatment plant and site cranes. Carry out Electrical maintenance work on LV systems

Aberdeen, Scotland, United Kingdom

• Responsibilities were setting up completions' certification suite for all Instrument / Electrical construction, commissioning activities to ensure asset integrity. Setting up ISO9001:2015 Quality Management System for drilling company. Assisting with asset integrity related scopes of work as and when required

Aberdeen, Scotland, United Kingdom

• Part of commissioning / completions team on the Bluewater Haewene Brim FPSO populating& managing the Mechanical Completions management database for all E & I construction / commissioning SOW & handover phases for all disciplines. Preparing all construction & commissioning dossiers, site inspection & verification during commissioning activities

Aberdeen, Scotland, United Kingdom

Asset verification on behalf of operators to carry out audits, surveys & questionnaires on contracting company maintenance and operating performance & to carry out verification on plant status ensuring plant aligns with latest P&IDs, Loop Drawings, Layouts etc. also ensuring that the maintenance databases reflect plant & equipment on site if not Red line drawings to reflect changes. Once audits / verification scopes completed compiling reports with findings to client with recommendations for improvements where required. Populate asset register databases from Loop / Layout / P&ID / drawings and related documentation for allocation of PMR’s. Manage the QA process HACCP

Baku City, Contiguous Azerbaijan, Azerbaijan

Manage GOC database including mentoring trainee engineers. Input into commissioning offshore projects for Instrumentation systems

Aberdeen City, Scotland, United Kingdom

• Set up GOC completions system for offshore assets for all Instrument / Electrical / Mechanical work - scopes. Manage offshore GOC Engineers. Review work - pack completions for construction / commissioning and handover

• Reviewing Projects, I&T summary sheets (ITS), work scopes, drawings, job cards and third - party vendor information to approve GOC certification using the BP document UKCS TI - 019 and company related procedures. Close - out scopes of work on return from offshore to align with BP’s gate 6 processes within allocated milestone period. Liaise with client & Lloyd’s Register for Verification of completed scopes of work using BP’s gate procedure. Asset Focal Point for BP asset TAR’s onshore and Co - ordinate certification / completions offshore. Review and update internal company procedures to ensure compliance with clients Technical Integrity procedures. Accountable for certification completeness for all offshore scopes of work offshore, update database with completed scopes of work to ensure Technical Integrity has been proven• Assist on other BP projects / sites on / offshore where required. Coordinate vendor certification requirements. Review and update company procedures for Certification / IVB / Close Out

Aberdeen City, Scotland, United Kingdom

• Reviewing work scopes associated with new projects for shutdown on Balmoral Platform. Create Certification Packs (HCP’s) from related work packs updating GOC database to prepare inspection & test summaries (ITS’s) and issuing offshore. Handover work scopes during offshore completion phase to client and ensure timely completion during close out phase. Review certification packs as work progresses through to mechanical completion (MC1) for completeness, assisting DNV for verification throughout commissioning and through to system handover (SH1) to client. Update GOC Dot.Net database on daily basis as work scopes completed; produce daily and weekly reports for management as required. Offshore completions / close - out focal point liaising with contractor & client to resolve any concerns / issues provide updates and ensure smooth offshore close - out achieved prior to sending completed packs onshore for on - shore close - out. Liaise with onshore close - out coordinator to ensure all close out objectives are met and completed on time

London Area, United Kingdom

• Reviewing work scopes in preparation for on - site audits as part of Asset Integrity Assurance group on Caspian Sea EP project for AGIP KCO. Ensuring contractors and vendors were complying with statutory regulations and company performance standards

Aberdeen City, Scotland, United Kingdom

• Reviewing work scopes associated with new projects for topsides and sub - sea module separator, Extra Living Quarter (ELQ), campaign work scopes & shutdown (TAR) scopes for BG Armada. Compiling GOC Handover Certification Packs (HCP’s) from related work packs updating GOC database to prepare inspection & test summaries (ITS’s) and issuing offshore. Handover work scopes during offshore completion phase to client and ensure timely completion during close out phase. Review certification packs as work progresses through to mechanical completion (MC1) for completeness, assisting Lloyd’s for verification throughout commissioning and through to system handover (SH1) to client. Update GOC database on daily basis as work scopes completed; produce daily and weekly reports for management as required. Offshore completions / close - out focal point liaising with contractor & client to resolve any concerns / issues provide updates and ensure smooth offshore close - out achieved prior to sending completed packs onshore for on - shore close - out. Liaise with onshore close - out coordinator to ensure all close out objectives are met and completed on time

• Compiling Certification, Commissioning, Handover Packs (CCHP’s) for BP Projects. Review I&T matrix sheets, work scopes, drawing’s, job cards and third - party vendor information to create GOC certification from BP document UKCS TI - 019 and company related procedures, this allows the asset to demonstrate that the minimum acceptable level of documentation that is required to demonstrate technical integrity has been acceptably achieved and / or reinstated following the completion of project and / or maintenance activities. Issue handover numbers using system Mnemonics, Close - out CCHP’s on return from asset within the given KPI targets. Update system trackers; provide daily weekly reports to Business Unit Focal Points as required. Liaise with Lloyd’s surveyors for technical integrity issues; attend meetings with client as required. Visit offshore assets to review and report on completed work scopes relating to commissioning / certification. Carry out Inspections ensuring completed systems and equipment were compliant and fit for purpose for various new systems associated with topside, utilities & accommodation projects. Liaise with construction for timely completion of construction work scopes, acceptance of MC1 certification, resolving any construction / pre - commissioning issues and punch out systems. Attending factory acceptance tests (F.A.T.) for 3rd party contractors. Manage vendors on site. Liaise with client for site acceptance tests (S.A.T.) Commission projects through to SH1 for client handover ensuring all targets have been acceptably achieved

Instrument Measurement & Control, National Certificate Measurement & Control

Higher National Units, Process Control, Instrumentation Measurement Systems, It, Engineering Mathematics, Plc’S:, Hnu

Svq Level 3, Instrument / Electrical Engineering