Working with an Awesome Team at FLX High-End Quality E-bikes, starting with Magura Electric Braking Systems, Mid-drive, Bafang Motor Systems, Internal Intergraded Wiring Systems, Samsung Battery Packs, Shimano Parts, Full Carbon, Full Suspension Frames and 6061 Aircraft Grade Aluminum Frames, Full Color Bafang Matrix LCD Screens and Pro Controllers with minimal wiring and Hard-Lock Connectivity. No issues for Error Codes. Voltage ranges from 36v, 42v, 48v, and 52volt systems, to make it all happen!

Electronic Engineering Service Manager, Juicedbikes “Electronic Bicycle Company. Tested and reported all new to market, first article, R&D, and returned electronic RMA’s/Items, validating testing. Starting with Lithium Batteries, 48Volt systems to 60Volt systems. Tested all BMS's for accurate Input/output data and charging levels. Tested and checked all DC/AC Converters/controllers for software code verification, bike data compliance. AC Motor checked QA/QC on each. Tested/checked all wiring, schematics on each build such as: electronic brakes, Throttle control, LCD configuration, lighting and accessory connections. Matrixes, compiled, systems data for all QA/QC issues. Used most Office spreadsheets, ERP systems. RMAs reported day-to-day directly to headquarters and CEO. Kept up with old/new trends. All issues were documented, pictures taken, for visual inspections/interpretation. Wrote the procedures for each test type. Electronics, software, and data. As an Engineer, was focused on the competition of e-bikes brought to market, or a direct comparison to our ebikes. These questions would often come up, helped with customer relation to understand differences. If new issues arise, would report to our CS teams. Showed as a group, so they could see first-hand. Trained all new members of the CS team during the work week, wore multiple hats each day, depending on support, or where additional work was needed. Spent quality time with each member of CS, taking notes, testing/checking products. It helped our support team get up to speed and see it visually. Had meetings with Directors of each team to informed of issues, trends. Warranty and Non-warranty were also noted/checked during incoming inspections to understand the milage, damages, updated matrixes for each Items by SN#’s, or date purchased. Was responsible for all MSDS sheets. Passed all multiple tests for handling Lithium, shipping, contaminated spills and processes.

Field Service (Contracted)LocationGreater San Diego Area Engaged in engineering, planning, design and implementation of mechanical systems in support of facilities operations management at Petco Park. Assisted in the implementation of new design integration's and enhancement processes. Worked with Hines Systems Management.

Responsible for process planning (RMA Returns, Production, and Manufacturing), development and implementation of M2M “turn-key” projects for global market customer-base. Responsible for the leadership, direction, overall training, mentoring, technical oversight and supervision to technicians/operations staff engaged in engineering, planning, designing and documentation in accordance to management processes. Developed and designed “Orbcomm”, “Global Star” and “Iridium” based modems to track private and government (DoD) customer assets, (i.e., heavy equipment; aviation; maritime; trucking; rail; utilities “electrical/oil/gas”); and monitored/controlled M2M GSM communicators for multiple satellite and terrestrial networks. Supported FCC “type-acceptance” approvals for international hardware license agreements for customers, such as: Hyundai; Hitachi; Komatsu; Caterpillar; and Volvo Trucking. Conducted weekly MRB project status meetings. Updated/tracked overall weekly logistical details, documentation and progress results. Developed and maintained various metrics (i.e., Prato, excel time-times, etc.) for process improvements. Responsible for ISO/TUV department audit certifications. Performed component engineering (hardware) testing in support of R&D, production, and “New Products Integration” (NPI), and served as QA design inspector for product prototyping and documentation. Skilled in manufacturing quality under the IPCA requirements and SMT assembly. Interpreted and reviewed electronic schematics and “Bill of Materials (BOMs) for accuracy and standard compliance. Certified in ISO 9001; ISO 14001 Quality Systems

Engaged in engineering, planning, design and implementation of mechanical systems in support of facilities operations management at Petco Park. Assisted in the implementation of new design integration's and enhancement processes. Worked with Hines Systems Management.

Performed operational/functional RF testing, troubleshooting and debugging assemblies, sub-assemblies and systems to isolate faults and determined remedies for malfunctions. Performed repairs on defective equipment at a component and board level. Ensured products were produced in accordance with released documentation and consistent with industry quality standards. Assisted with Engineering Release Orders, Engineering Change Order (ECO), reviewed, revised and implemented production operational procedure manuals. Proficient with JTAG programming, and Labview software. Assisted cross-functional teams in analyzing and resolving RF product issues. Analyzed and reported Contract Manufacture’s (CM) product failure trends. Supported RF ATE operational tests and fault isolation on customer systems and equipment to insure conformance of its equipment/hardware; such as: Home Depot, Lowes, Walgreens, Target, Dick’s Sporting Goods, BevMo, and Safeway (Vons).

Engaged in engineering, planning, design and implementation of mechanical systems in support of facilities operations management at Petco Park. Assisted in the implementation of new design integration's and enhancement processes. Worked with Hines Systems Management.

Ensured products were produced in accordance with released documentation and consistent with industry quality standards. Assisted with Engineering Release Orders, Engineering Change Order, reviewed, revised and implemented production operational procedure manuals. Wrote functionality updates in manuals for testing hardware and software.

Responsible for the planning (R&D), development and implementation of M2M “turn-key” implementation projects for global market customer-base. Responsible for the leadership, direction, overall training, mentoring, technical oversight and supervision to technicians/operations staff engaged in engineering, planning, designing and documentation in accordance to management processes. Developed and designed “Orbcomm”, “Global Star” and “Iridium” based modems to track private and government (DoD) customer assets, (i.e., heavy equipment; aviation; maritime; trucking; rail; utilities “electrical/oil/gas”); and monitored/controlled M2M GSM communicators for multiple satellite and terrestrial networks. Supported FCC “type-acceptance” approvals for international hardware license agreements for customers, such as: Hyundai; Hitachi; Komatsu; Caterpillar; and Volvo Trucking. Conducted weekly MRB project status meetings. Updated/tracked overall weekly logistical details, documentation and progress results. Developed and maintained various metrics (i.e., Prato, excel time-times, etc.) for process improvements. Responsible for ISO/TUV department audit certifications. Performed component engineering (hardware) testing in support of R&D, production, and “New Products Integration” (NPI), and served as QA design inspector for product prototyping and documentation. Skilled in manufacturing quality under the IPCA requirements and SMT assembly. Interpreted and reviewed electronic schematics and “Bill of Materials (BOMs) for accuracy and standard compliance. Certified in ISO 9001; ISO 14001 Quality Systems.

Developed and designed “Radio Control Systems”, “Servos”, “Receivers”, “Transmitters”,“Speed-Controllers” and “Charger” products for distributors. Proficient electromechanicalengineer in the design requirements/specifications and interface in the manufacturing and developing of new electrical products to market, such as: Robonova-1 Humanoid Robot Kits, etc. Designed, tested electronic component devices and monitored “turn-key” customer systems forprivate (OEM) sector markets. Supported FCC “type-acceptance” approvals. Assisted in theimplementation of new design product integrations and applied schematic trace updates for related design issues on multi-layered boards. Proficient in interpreting and reviewing electronic schematics and “Bill of Materials (BOMs) for standard compliance. Identified, created and implemented processes in support of “Return Merchandise Authorization” (RMA's) and served as the customer’s primary interface. Performed failure analysis on product returns. Developed and maintained various metrics (i.e., Prato, excel time-lines, etc.) for process improvements.