Project Manager for Fukushima ProjectsManaged the Seismic Hazard Analysis for the Columbia Generating Station; including the Level 3 Senior Seismic Hazard Analysis Committee (SSHAC) Evaluation, the Ground Motion Response Spectrum (GMRS) and the NRC Seismic Submittal. Coordinated the responses to the NRC’s Requests for Additional Information (RAIs) of the submittal. Supervised the Expedited Seismic Evaluation Process (ESEP). Developed the Scope of Work for the Seismic Probabilistic Risk… Show more Project Manager for Fukushima ProjectsManaged the Seismic Hazard Analysis for the Columbia Generating Station; including the Level 3 Senior Seismic Hazard Analysis Committee (SSHAC) Evaluation, the Ground Motion Response Spectrum (GMRS) and the NRC Seismic Submittal. Coordinated the responses to the NRC’s Requests for Additional Information (RAIs) of the submittal. Supervised the Expedited Seismic Evaluation Process (ESEP). Developed the Scope of Work for the Seismic Probabilistic Risk Analysis for Columbia.Supervised the design, procurement, installation, testing and project closeout for the Spent Fuel Pool Level Instrumentation for Columbia Generation Station, as part of the Fukushima response. This instrumentation utilizes Guided Wave Radar technology.Project Manager for the Thermal Power Optimization (TPO) Power UprateSupervised the plant evaluation and development of the TPO/Appendix K Power Uprate for Columbia Generation Station. This Power Uprate was possible due to the installation of Leading Edge Flowmeters (which measure feedwater flow more accurately). Show less

Project Manager for PTN-3/4 Extended Power Uprate (EPU)Supervised the design, procurement, fabrication, installation. testing and project closeout for several major systems for FPL’s Turkey Point (PTN) Units 3 and 4 Nuclear Plants. This included the replacement of the Moisture Separator Reheaters (MSRs), Feedwater Heaters, Turbine Plant Cooling Water Heat Exchangers, Condensate and Feedwater Pumps, Turbine Gland Seal System, plus several smaller system upgrades.

Project Manager for PTN-3/4 Emergency Containment Suction Strainers Supervised the design, testing, fabrication and installation of the Emergency Containment Suction Strainers for FPL’s Turkey Point (PTN) Units 3 and 4 Nuclear Plants. Supervised the fabrication of the St. Lucie 1&2 Containment Suction Strainers.

Project Manager for NMP1 HWC System and NobleChem™ Injection Supervised the design, installation and testing of the Hydrogen Water Chemistry (HWC) System, and the NobleChem™ Injection for the Nine Mile Point Unit One (NMP1) Nuclear Plant. Assisted the NMP2 Project Manager in the NobleChem™ Injection for NMP2.

Project Manager.• Nine Mile Point Unit Two (NMP2) HWC System. Supervised the design, installation and preoperational testing of the system. • HWC Upgrade for the James A. FitzPatrick plant. Supervised the design of the turbine shielding required for the system upgrade. Coordinated the development of a shared H2/O2 Gas Supply Facility for the FitzPatrick and NMP2 Plants.• Passive GEZIP (Depleted Zinc Injection) System for the James A. FitzPatrick plant. Supervised the design… Show more Project Manager.• Nine Mile Point Unit Two (NMP2) HWC System. Supervised the design, installation and preoperational testing of the system. • HWC Upgrade for the James A. FitzPatrick plant. Supervised the design of the turbine shielding required for the system upgrade. Coordinated the development of a shared H2/O2 Gas Supply Facility for the FitzPatrick and NMP2 Plants.• Passive GEZIP (Depleted Zinc Injection) System for the James A. FitzPatrick plant. Supervised the design, installation, and preoperational testing of the system. • Limerick Hydrogen Water Chemistry System. Developed the Safety Evaluation and design calculations for the installation of the system. Provided support for the plant’s Engineering Group in addressing technical issues.• Chinshan Shroud Evaluation. Developed tooling and performed the Ultrasonic Test examination of Intergranular Stress Corrosion Cracks (IGSCC) in the core shroud at the Chinshan 2 plant in Taiwan. Supervised the development/testing of Electrostatic Discharge Machine (EDM) tooling and the in-vessel removal of a shroud “boat sample” for metallurgical analysis. Project Engineer.• Performed an evaluation of the Low Pressure Coolant Injection Systems at Dresden Units Two and Three as part of the Material Condition Improvement Program. • Nine Mile Point Unit One (NMP1) Shroud Repair. Developed the design package for the repair of IGSCC cracks in the shroud. Lead Engineer for the qualification and testing of the Electrostatic Discharge Machine (EDM) tools used for the repair. Supervised the operation of the EDM machines and tooling during the modification. Show less